Physical, chemical, and mechanical properties of nanostructured materials

Materials Science

Volumn 42, Issue 1, 2006, Pages 85-94

  Kurzydlowski, K J ^a  

^a WARSAW UNIVERSITY OF TECHNOLOGY   (Poland)

Author keywords

[No Author keywords available]

Indexed keywords

CORROSION; EXTRUSION; MICROSTRUCTURE; PRESSURE EFFECTS; SCANNING ELECTRON MICROSCOPY; SINTERING; X RAY DIFFRACTION ANALYSIS;

HYDROSTATIC EXTRUSION; NANOCOMPOSITES; NONELECTRIC CHEMICAL METALLIZATION;

NANOSTRUCTURED MATERIALS;

EID: 33747880886     PISSN: 1068820X     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11003-006-0060-2     Document Type: Article

References (29)

1. R. Z. Valiev, R. K. Islamgaliev, and I. V. Aleksandrov, "Bulk nanostructured materials from severe plastic deformation," Progress Mat. Sci., 45, 103 (2000).
2. M. Furukawa, Z. Horita, M. Nemoto, and T. G. Langdon, "The use of severe plastic deformation for microstructural control," Mat. Sci. Eng., A324, 82 (2002).
3. P. B. Prangnell, J. R. Bowen, and P. J. Apps, "Ultra-fine grain structures in aluminium alloys by severe deformation processing," Mat. Sci. Eng., A375-377, 178 (2004).
4. R. Z. Valiev, A. V. Sergeyeva, and A. K. Mukherjee, "The effect of annealing on tensile deformation behavior of nanostructured SPD titanium," Scripta Mater., 49, 669 (2003).
5. Z. Horita, T. Fujinami, M. Nemoto, and T.G. Langdon, "Improvement of mechanical properties for Al alloys using equal-channel angular pressing," J. Mat Proc. Tech., 117, 288 (2001).
6. R. Z. Valiev, D. A. Salimonenko, N. K. Tsenev, B. Berbon, and T. G. Langdon, "Observation of high strain rate superplasticity in commercial aluminum alloys with ultrafine grain size," Scripta Mater., 37, 1945 (1997).
7. M. A. Munos-Morris, C. Garcia Oca, and D. G. Morris, "Mechanical behaviour of dilute Al-Mg alloy processed by equal channel angular pressing," Scripta Mater., 48, 213 (2003).
8. N. Tsuji, Y. Ito, Y. Saito, and Y. Minamino, "Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing," Scripta Mater., 47, 893 (2002).
9. C. Y. Barlow, P. Nielsen, and N. Hansen, "Multilayer roll bonded aluminium foil: processing, microstructure, and flow stress," Acta Mater., 52, 3967 (2004).
10. K. Neishi, Z. Horita, and T. G. Langdon, "Achieving superplasticity in Cu-40% Zn alloy through severe plastic deformation," Scripta Mater., 45, 965 (2001).
11. V. M. Segal, "Materials processing by simple shear," Mater. Sci. Eng., A197, 157 (1995).
12. Y. Iwahashi, Z. Horita, M. Nemoto, and T. G. Langdon, "The process of grain refinement in equal-channel angular pressing," Acta Mater., 46, 3317 (1998).
13. A. P. Zhilayaev, B.-K. Kim, G. V. Nurislamova, et al., "Orientation imaging microscopy of ultrafine-grained nickel," Scripta Mater., 46, 575 (2002).
14. M. Richert, Q. Liu, and N. Hansen, "Microstructural evolution over a large strain range in aluminium deformed by cyclic-extrusion-compression," Mat. Sci. Eng., A260, 275 (1999).
15. Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai, "Novel ultra-high straining process for bulk materials-development of the accumulative roll-bonding (ARE) process," Acta Mater., 47, 579 (1999).
16. J. Y. Huang, Y. T. Zhu, H. Jiang, and T. C. Lowe, "Microstructures and dislocation configurations in nanostructured Cu processed by repetitive corrugation and straightening," Acta Mater., 49, 1497 (2001).
17. A. P. Zhilayaev, G, V. Nurislamova, B.-K.Kim, et al., "Experimental parameters influencing grain refinement and microstructural evolution during high-pressure torsion," Acta Mater., 51, 753 (2002)
18. N. Tsuji, R. Ueji, Y. Minamino, and Y. Saito, "A new and simple process to obtain nano-structured bulk low-carbon steel with superior mechanical property," Scripta Mater., 46, 305 (.2002).
19. Y. Iwahashi, J. Wang, Z. Horita, et al., "Principle of equal-channel angular pressing of ultra-fine grained materials," Scripta Mater., 35, 143 (1996).
20. T. Hebesberger, H. P. Stuwe, A. Vorhauer, et al., "Structure of Cu deformed by high-pressure torsion," Acta Mater., 53, 393 (2005).
21. M. Lewandowska, H. Garbacz, W. Pachia, et al., "Hydrostatic extrusion and nanostructure formation in an aluminium alloy," Solid State Phen., 101, 65 (2005).
22. B. Adamczyk-Cieślak, J. Mizera, M. Lewandowska, and K. J. Kurzydłowski, "Microstructure evaluation in an Al-Li alloy processed by severe plastic deformation," Rev. Adv. Mater. Sci., 8, 107 (2004).
23. K. J. Kurzydlowski, H. Garbacz, and M. Richert, "Effect of severe plastic deformation on the microstructure and mechanical properties of Al and Cu," Rev. Adv. Mater. Sci., 8, 129 (2004).
24. S. Gierlotka, B. F. Palosz, A. Swiderska-Sroda, et al., "Synthesis of metal-ceramic nanocomposites by high pressure infiltration," Solid State Phen., 101-102, 157-164 (2005).
25. B. Faber, E. Cadel, A. Menand, et al., "Phosphorus segregation in nanocrystalline Ni-3.6at.% P alloy investigated with the tomographic atom probe," Acta Materialia, 48, 789-796 (2000).
26. J. Bielinski, I. Kulak, A. Bielinska, J. Michalski, "Bezpra̧ dowe niklowanie materiałów litych i proszkowych," Ochrona Przed Korozjq, 46 (11A), 233-237 (2003).
27. J. F. Cannon, "Behavior of the elements at high pressures," Phys. Chem. Ref. Data, 3, No. 3, 781-824 (1974).
28. 3/Ni-P nanocomposites through hot pressing process," Solid State Phen., 101-102, 147-150 (2005).
29. T. B. Massalski, H. Okamoto, R. Subramanian, and L. Kacprzyk, Binary Alloy Phase Diagrams, 2nd Ed., Vol. 3, SAM Int., Materials Park, OH (1992).