Novel hydrophilic surface modifying macromolecules for polymeric membranes: Polyurethane ends capped by hydroxy group

Journal of Membrane Science

Volumn 282, Issue 1-2, 2006, Pages 205-216

  Rana, D ^a   Matsuura, T ^a   Narbaitz, R M ^a  

^a UNIVERSITY OF OTTAWA   (Canada)

Author keywords

Contact angle; Hydrophilic surface modifying macromolecule; Poly(ether sulfone); Polyurethane hydroxyl group ends; Ultra filtration

Indexed keywords

CONTACT ANGLE; HYDROPHILICITY; MOLECULAR WEIGHT; POLYURETHANES; PORE SIZE; TRANSPORT PROPERTIES; ULTRAFILTRATION;

HYDROPHILIC SURFACES; POLY(ETHER SULFONE); PORE SIZE DISTRIBUTIONS; SOLUTE;

POLYMERIC MEMBRANES;

HYDROXYL GROUP; MACROGOL; POLYETHERSULFONE; POLYMER; POLYURETHAN; PROPANEDIOL DERIVATIVE;

CONTACT ANGLE; HYDROPHILICITY; MOLECULAR WEIGHT; POLYMERIC MEMBRANES; POLYURETHANES; PORE SIZE; TRANSPORT PROPERTIES; ULTRAFILTRATION;

ARTICLE; ARTIFICIAL MEMBRANE; CONTACT ANGLE; DATA ANALYSIS; GEOMETRY; HYDROPHILICITY; MACROMOLECULE; POROSITY; PRIORITY JOURNAL; STATISTICAL SIGNIFICANCE; SURFACE PROPERTY; ULTRAFILTRATION;

EID: 33747806309     PISSN: 03767388     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.memsci.2006.05.024     Document Type: Article

References (58)

1. Ryu D.Y., Shin K., Drockenmuller E., Hawker C.J., and Russell T.P. A generalized approach to the modification of solid surfaces. Science 308 (2005) 236
2. Jisr R.M., Rmaile H.H., and Schlenoff J.B. Hydrophobic and ultrahydrophobic multiplayer thin films from perfluorinated polyelectrolytes. Angew. Chem. Int. Ed. 44 (2005) 782
3. Poussard L., Burel F., Couvercelle J.P., Merhi Y., Tabrizian M., and Bunel C. Homocompatibilty of new ionic polyurethanes: Influence of carboxylic group insertion modes. Biomaterials 25 (2004) 3473
4. Feng L., Zhang Z., Mai Z., Ma Y., Liu B., Jiang L., and Zhu D. A super-hydrophobic and super-oleophilic coating mesh film for the separation of oil and water. Angew. Chem. Int. Ed. 43 (2004) 2012
5. Xie Q., Xu J., Feng L., Jiang L., Tang W., Luo X., and Han C.C. Facile creation of a super-amphiphobic coating surface with bionic microstructure. Adv. Mater. 16 (2004) 302
6. Zhai L., Cebeci F.C., Cohen R.E., and Rubner M.F. Stable superhydrophobic coatings from polyelectrolyte multilayers. Nano. Lett. 4 (2004) 1359
7. Erbil H.Y., Demirel A.L., Avci Y., and Mert O. Transformation of a simple plastic into a superhydrophobic surface. Science 299 (2003) 1377
8. Kull K.R., Steen M.L., and Fisher E.R. Surface modification with nitrogen-containing plasmas to produce hydrophilic, low-fouling membranes. J. Membr. Sci. 246 (2005) 203
9. Tiaw K.S., Goh S.W., Hong M., Wang Z., Lan B., and Teoh S.H. Laser surface modification of poly(ε-caprolactone) (PCL) membrane for tissue engineering applications. Biomaterials 26 (2005) 763
10. Taniguchi M., and Belfort G. Low protein fouling synthetic membranes by UV-assisted surface grafting modification: varying monomer type. J. Membr. Sci. 231 (2004) 147
11. Cen L., Neoh K.G., Ying L., and Kang E.T. Surface modification of polymeric films and membranes to achieve antibacterial properties. Surf. Interface Anal. 36 (2004) 716
12. Lafrenière L.Y., Talbot F.D.F., Matsuura T., and Sourirajan S. Effect of polyvinylpyrrolidone additive on the performance of polyethersulfone ultrafiltration membranes. Ind. Eng. Chem. Res. 26 (1987) 2385
13. Miyano T., Matsuura T., Carlsson D.J., and Sourirajan S. Retention of polyvinylpyrrolidone swelling agent in the poly(ether p-phenylenesulfone) ultrafiltration membrane. J. Appl. Polym. Sci. 41 (1990) 407
14. Miyano T., Matsuura T., and Sourirajan S. Effect of polyvinylpyrrolidone addition on the pore size and pore size distribution of polyethersulfone (Victrex) membrane. Chem. Eng. Commun. 119 (1993) 23
15. Barzin J., Madaeni S.S., Mirzadeh H., and Mehrabzadeh M. Effect of polyvinylpyrrolidone on morphology and performance of hemodialysis membranes prepared from polyethersulfone. J. Appl. Polym. Sci. 92 (2004) 3804
16. Barzin J., Feng C., Khulbe K.C., Matsuura T., Madaeni S.S., and Mirzadeh H. Characterization of polyethersulfone hemodialysis membrane by ultrafiltration and atomic force microscopy. J. Membr. Sci. 237 (2004) 77
17. T. Matsuura, P. Santerre, R.M. Narbaitz, V.A. Pham, Y. Fang, H. Mahmud, F. Baig, Membrane composition and method of preparation, US Patent 5,954,966 (1999).
18. Ho J.Y., Matsuura T., and Santerre J.P. The effect of fluorinated surface modifying macromolecules on the surface morphology of polyethersulfone membranes. J. Biomater. Sci., Polym. Ed. 11 (2000) 1085
19. Suk D.E., Chowdhury G., Matsuura T., Narbaitz R.M., Santerre P., Pleizier G., and Deslandes Y. Study on the kinetics of surface migration of surface modifying macromolecules in membrane preparation. Macromolecules 35 (2002) 3017
20. Jahangir A.R., McClung W.G., Cornelius R.M., McCloskey C.B., Brash J.L., and Santerre J.P. Fluorinated surface-modifying macromolecules: modulating adhesive protein and platelet interactions on a polyether-urethane. J. Biomed. Mater. Res. 60 (2002) 135
21. Jahangir R., McCloskey C.B., McClung W.G., Labow R.S., Brash J.L., and Santerre J.P. The influence of protein adsorption and surface modifying macromolecules on the hydrolytic degradation of a poly(ether-urethane) by cholesterol esterase. Biomaterials 24 (2003) 121
22. Zhang L., Chowdhury G., Feng C., Matsuura T., and Narbaitz R. Effect of surface-modifying macromolecules and membrane morphology on fouling of polyethersulfone ultrafiltration membranes. J. Appl. Polym. Sci. 88 (2003) 3132
23. Khayet M., Suk D.E., Narbaitz R.M., Santerre J.P., and Matsuura T. Study on surface modification by surface-modifying macromolecules and its applications in membrane-separation processes. J. Appl. Polym. Sci. 89 (2003) 2902
24. Mosqueda-Jimenez D.B., Narbaitz R.M., and Matsuura T. Impact of membrane surface modification on the treatment of surface water. J. Environ. Eng. 130 (2004) 1450
25. Mosqueda-Jimenez D.B., Narbaitz R.M., and Matsuura T. Manufacturing conditions of surface-modified membranes: effects on ultrafiltration performance. Sep. Purif. Technol. 37 (2004) 51
26. Khayet M., Mengual J.I., and Matsuura T. Porous hydrophobic/hydrophilic composite membranes application in desalination using direct contact membrane distillation. J. Membr. Sci. 252 (2005) 101
27. Mosqueda-Jimenez D.B., Narbaitz R.M., and Matsuura T. Effects of preparation conditions on the surface modification and performance of polyethersulfone ultrafiltration membranes. J. Appl. Polym. Sci. 99 (2006) 2978
28. Suk D.E., Matsuura T., Park H.B., and Lee Y.M. Synthesis of a new type of surface modifying macromolecules (nSMM) and characterization and testing of nSMM blended membranes for membrane distillation. J. Membr. Sci. 277 (2006) 177
29. Rana D., Matsuura T., Narbaitz R.M., and Feng C. Development and characterization of novel hydrophilic surface modifying macromolecule for polymeric membranes. J. Membr. Sci. 249 (2005) 103
30. Cabasso I., Klein E., and Smith J.K. Polysulfone hollow fibers. I. Spinning and properties. J. Appl. Polym. Sci. 20 (1976) 2377
31. Uragami T., Naito Y., and Sugihara M. Studies on synthesis and permeability of special polymer membranes 39. Permeation characteristics and structure of polymer blend membranes from poly(vinylidene fluoride) and poly(ethylene glycol). Polym. Bull. 4 (1981) 617
32. M. Kraus, M. Heisler, I. Katsnelson, D. Velazques, Filtration membranes and method of making the same, US Patent 4,900,449 (1990).
33. Hwang J.R., Koo S.-H., Kim J.-H., Higuchi A., and Tak T.-M. Effects of casting solution composition on performance of poly(ether sulfone) membrane. J. Appl. Polym. Sci. 60 (1996) 1343
34. 2+) separation by complexation ultrafiltration. J. Macromol. Sci., Pure Appl. Chem. A39 (2002) 557
35. Mahendran R., Malaisamy R., and Mohan D.R. Cellulose acetate and polyethersulfone blend ultrafiltration membranes. Part I. Preparation and characterization. Polym. Adv. Technol. 15 (2004) 149
36. Munari S., Bottino A., Capannelli G., Moretti P., and Petit Bon P. Preparation and characterization of polysulfone-polyvinylpyrrolidone based membranes. Desalination 70 (1988) 265
37. Boom R.M., Wienk I.M., van den Boomgaard Th., and Smolders C.A. Microstructures in phase inversion membranes. Part 2. The role of a polymeric additive. J. Membr. Sci. 73 (1992) 277
38. Ochoa N.A., Prádanos P., Palacio L., Pagliero C., Marchese J., and Hernández A. Pore size distributions based on AFM imaging and retention of multidisperse polymer solutes: Characterization of polyethersulfone UF membranes with dopes containing different PVP. J. Membr. Sci. 187 (2001) 227
39. Kang J.S., and Lee Y.M. Effects of molecular weight of polyvinylpyrrolidone on precipitation kinetics during the formation of asymmetric polyacrylonitrile membrane. J. Appl. Polym. Sci. 85 (2002) 57
40. Li D., Chung T.-S., and Wang R. Morphological aspects and structure control of dual-layer asymmetric hollow fiber membranes formed by a simultaneous co-extrusion approach. J. Membr. Sci. 243 (2004) 155
41. Kim J.-H., and Lee K.-H. Effect of PEG additive on membrane formation by phase inversion. J. Membr. Sci. 138 (1998) 153
42. Tanford C. The Hydrophobic Effect: Formation of Micelles and Biological Membranes. second ed. (1980), John Wiley & Sons, New York, NY Chapter 6, p. 57
43. Kumar R., Tyagi R., Shakil N.A., Parmar V.S., Kumar J., and Watterson A.C. Self-assembly of PEG and diester copolymers: effect of PEG length, linker, concentration and temperature. J. Macromol. Sci., Pure Appl. Chem. A42 (2005) 123
44. Matsuura T. Synthetic Membranes and Membrane Separation Processes (1994), CRC Press, Boca Raton, FL
45. Sourirajan S., and Matsuura T. Reverse Osmosis/Ultrafiltration Process Principles (1985), National Research Council Canada, Ottawa, ON Chapter 7, p. 681
46. Mosqueda-Jimenez D.B., Narbaitz R.M., and Matsuura T. Membrane fouling test: apparatus evaluation. J. Environ. Eng. 130 (2004) 90
47. Michaels A.S. Analysis and prediction of sieving curves for ultrafiltration membranes: a universal correlation?. Sep. Sci. Technol. 15 (1980) 1305
48. Singh S., Khulbe K.C., Matsuura T., and Ramamurthy P. Membrane characterization by solute transport and atomic force microscopy. J. Membr. Sci. 142 (1998) 111
49. Zeman L.J., and Zydney A.L. Microfiltration and Ultrafiltration: Principles and Applications (1996), Marcel Dekker Inc., New York, NY
50. Norberg D., Holmquist S., Hong S.K., and Taylor J.S. Surface characterization and performance evaluation of commercial fouling resistant low-pressure RO membranes. American Water Works Association, Membrane Technology Conference Proceedings. Atlanta, GA, 2-5 March (2003)
51. Chaturvedi B.K., Ghosh A.K., Ramachandhran V., Trivedi M.K., Hanra M.S., and Misra B.M. Preparation, characterization and performance of polyethersulfone ultrafiltration membranes. Desalination 133 (2001) 31
52. Tang B., Wu D., and Xu T. Effect of PEG additives on properties and morphologies of membranes prepared from poly(2,6-dimethyl-1,4-phenylene oxide) by benzyl bromination and in situ amination. J. Appl. Polym. Sci. 98 (2005) 2414
53. A.B. Newton, Compatible polymer blend compositions, US Patent 4,387,187 (1983).
54. A.R.M. Azad, R.A. Goffe, Covalent attachment of macromolecules to polysulfones or polyethersulfones modified to contain functionalizable chain ends, US Patent 5,462,867 (1995).
55. Marchese J., Ponce M., Ochoa N.A., Prádanos P., Palacio L., and Hernández A. Fouling behaviour of polyethersulfone UF membranes made with different PVP. J. Membr. Sci. 211 (2003) 1
56. Mosqueda-Jimenez D.B., Narbaitz R.M., Matsuura T., Chowdhury G., Pleizier G., and Santerre J.P. Influence of processing conditions on the properties of ultrafiltration membranes. J. Membr. Sci. 231 (2004) 209
57. Silver J.H., Myers C.W., Lim F., and Cooper S.L. Effect of polyol molecular weight on the physical properties and haemocompatibility of polyurethanes containing polyethylene oxide macroglycols. Biomaterials 15 (1994) 695
58. Nie F.-Q., Xu Z.-K., Ye P., Wu J., and Seta P. Acrylonitrile-based copolymer membranes containing reactive groups: effects of surface-immobilized poly(ethylene glycol)s on anti-fouling properties and blood compatibility. Polymer 45 (2004) 399