Effect of water curing conditions on the hydration degree and compressive strengths of fly ash-cement paste

Cement and Concrete Composites

Volumn 28, Issue 9, 2006, Pages 781-789

  Termkhajornkit, Pipat ^a   Nawa, Toyoharu ^a   Kurumisawa, Kiyofumi ^a  

^a HOKKAIDO UNIVERSITY   (Japan)

Author keywords

Compressive strength; Curing; Fly ash; Hydration

Indexed keywords

BINDERS; CEMENTS; COMPRESSIVE STRENGTH; CURING; HYDRATION;

BELITE; BINDER RATIO; FLY ASH-CEMENT PASTE; RIETVELD ANALYSIS;

FLY ASH;

EID: 33747779361     PISSN: 09589465     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cemconcomp.2006.05.018     Document Type: Article

References (28)

1. Helmuth R.A. Fly ash in cement and concrete (1987), Portland Cement Association, Skokie, Ill.
2. Malhotra V.M., and Mehta P.K. Pozzolanic and cementitious materials (Advances in concrete technology) (1996), Taylor & Francis Group
3. Lam L., Wong Y.L., and Poon C.S. Degree of hydration and gel/space ratio of high-volume fly ash/cement systems. Cem Concr Res 30 5 (2000) 747-756
4. Tokyay M. Effects of three Turkish fly ashes on the heat of hydration of PC-FA pastes. Cem Concr Res 18 (1988) 957-960
5. Termkhajornkit P., Nawa T., Nakai M., and Saito T. Effect of fly ash on autogenous shrinkage. Cem Concr Res 35 3 (2005) 473-482
6. Termkhajornkit P., and Nawa T. The fluidity of fly ash-cement paste containing naphthalene sulfonate superplasticizer. Cem Concr Res 34 6 (2004) 1017-1024
7. Poon C.S., Lam L., and Wong Y.L. A study on high strength concrete prepared with large volumes of low calcium fly ash. Cem Concr Res 30 (2000) 447-455
8. Bouzoubaa N., Zhang M.H., and Malhotra V.M. Laboratory-produced high-volume fly ash blended cements compressive strength and resistance to the chloride-ion penetration of concrete. Cem Concr Res 30 (2000) 1037-1046
9. Jiang L.H., and Malhotra V.M. Reduction in water demand of non-air entrained concrete incorporating large volumes of fly ash. Cem Concr Res 30 (2000) 1785-1789
10. Bouzoubaa N., and Lachemi M. Self-compacting concrete incorporating high volumes of class F fly ash-preliminary results. Cem Concr Res 31 (2001) 413-420
11. Ozer B., and Ozkul M.H. The influence of initial water curing on the strength development of ordinary Portland and pozzolanic cement concretes. Cem Concr Res 34 1 (2004) 13-18
12. Atis C.D. Strength properties of high-volume fly ash roller compacted and workable concrete, and influence of curing condition. Cem Concr Res 35 (2005) 1112-1121
13. Ramezanianpour A.A., and Malhotra V.M. Effect of curing on the compressive strength, resistance to chloride-ion penetration and porosity of concretes incorporating slag, fly ash or silica fume. Cem Concr Compos 17 2 (1995) 125-133
14. Toutanji H., Delatte N., Aggoun S., Duval R., and Danson A. Effect of supplementary cementitious materials on the compressive strength and durability of short-term cured concrete. Cem Concr Res 34 2 (2004) 311-319
15. Cao C., Sun W., and Qin H. The analysis on strength and fly ash effect of roller-compacted concrete with high volume fly ash. Cem Concr Res 30 1 (2000) 71-75
16. Freidin C. Hydration and strength development of binder based on high-calcium oil shale fly ash: Part II. Influence of curing conditions on long-term stability. Cem Concr Res 29 11 (1999) 1713-1719
17. Khan M.S., and Ayers M.E. Curing requirements of silica fume and fly ash mortars. Cem Concr Res 23 6 (1993) 1480-1490
18. Haque M.N., Goplan M.K., Joshi R.C., and Ward M.A. Strength development of inadequately cured high fly ash content and structural concretes. Cem Concr Res 16 3 (1986) 363-372
19. Zhang M.H., Bilodeau A., Malhotra V.M., Kim K.S., and Kim J.-C. Concrete incorporating supplementary cementing materials: effect of curing on compressive strength and resistance to chloride-ion penetration. ACI Mater J 96 2 (1999) 181-189
20. Scrivener KL, Pratt PL. Characterisation of Portland cement hydration by electron optical techniques. In: Electron microscopy of materials. Proc Mat Res Soc Symp, vol. 31, 1983. p. 351-6.
21. Scrivener KL, Pratt PL. Backscattered electron images of polished cement sections in the scanning electron microscope. In: Proceedings of the sixth international conference on cement microscopy, Albuquerque, 1984. p. 145-55.
22. Igarashi S., Kawamura M., and Watanabe A. Analysis of cement pastes and mortars by a combination of backscatter-based SEM image analysis and calculations based on the Powers model. Cem Concr Compos 26 8 (2004) 977-985
23. Moller H., and Polysius A.G.K. Standardless quantitative phase analysis of Portland cement clinkers. World Cem September (1995) 75-84
24. Taylor J.C., Hinczak I., and Matulis C.E. Rietveld full-profile quantification of Portland cement clinker, The importance of including a full crystallography of the major phase polymorphs. Powder Diffr 15 (2000) 7-18
25. Taylor J.C., and Aldridge L.P. Full-profile quantitative XRD analysis of Portland cement powder diffraction, testing of possible standard XRD profiles for the major phase, tricalcium silicate. Powder Diffr 8 (1993) 138-144
26. Scrivener K.L., Füllmann T., Gallucci E., Walenta G., and Bermejo E. Quantitative study of Portland cement hydration by X-ray diffraction/Rietveld analysis and independent methods. Cem Concr Res 34 9 (2004) 1541-1547
27. Termkhajornkit P, Nawa T, Kurumisawa K. Quantitative investigation on fly ash and Portland cement hydration. Cem Concr Res, submitted for publication.
28. Japanese Architectural Standard Specification JASS15 M-103.