Twinning-induced sluggish evolution of texture during recrystallization in AISI 316L stainless steel after cold rolling

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 37, Issue 8, 2006, Pages 2349-2359

  Chowdhury, Sandip Ghosh ^a   Das, Samar ^a   Ravikumar, B ^a   De, P K ^a  

^a NATIONAL METALLURGICAL LABORATORY   (India)

Author keywords

[No Author keywords available]

Indexed keywords

ANNEALING; AUSTENITE; COLD ROLLING; DEFORMATION; NUCLEATION; RECRYSTALLIZATION (METALLURGY); TEXTURES; TWINNING;

DEFORMED MATRIX; TWIN CHAIN REACTION;

STAINLESS STEEL;

EID: 33747467492     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02586209     Document Type: Article

References (45)

1. B.J. Duggan, W.B. Hutchinson, and M. Hatherly: Scripta Metall., 1978, vol. 12, p. 293.
2. U. Schmidt and K. Lucke: Textures Cryst. Sol., 1979, vol. 3, p. 85.
3. J. Huber and M. Hatherly: Z. Metallkd., 1980, vol. 71, p. 15.
4. A. Berger, P.-J. Wilbrandt, and P. Hassen: Acta Metall., 1983, vol. 31, p. 1433.
5. O. Engler, J. Hirsch, and K. Luecke: Z. Metallkd., 1995, vol. 86, p. 475.
6. P. Hassen: Metall. Trans., 1993, vol. 24B, p. 225.
7. J. Bystrzycki, W. Przetakiewicz, and K.J. Kurzydiowski: Acta Metall., 1993, vol. 41, p. 2639.
8. S. Mahajan, C.S. Pande, M.A. Imam, and B.B. Rath: Acta Metall., 1997, vol. 45, p. 2633.
9. W.B. Hutchinson and R.K. Ray: Metal Sci., 1979, vol. 13, p. 125.
10. P.T. Wakefield and M. Hatherly: Metal Sci., 1983, vol. 17, p. 55.
11. B. Plege, T. Noda, and H.J. Bunge: Z Metallkd., 1981, vol. 72, p. 641.
12. T. Noda, B. Plege, and J. Grewen: ICOTOM, 1978, vol. 5, p. 443.
13. H. Eichelkraut, J. Hirsch, and K. Lucke: Z. Metallkd., 1984, vol. 75, p. 113.
14. M.J. Dickson and D. Green: Mater. Sci. Eng., 1969, vol. 4, p. 304.
15. S.R. Goodman and H. Hu: Trans. AIME., 1965, vol. 233, p. 103.
16. M.J. Dickson and R.P. Stratton: J. Appl. Crystallogr., 1972, vol. 5, p. 107.
17. C. Donadille, R. Valle, P. Dervin, and R. Penelle: Acta Metall., 1989, vol. 37, p. 1547.
18. V.I. Yushkov, R.A. Adamescu, Y.S. Machnev, T.M. Gapeka, and P.V. Geld: Mater. Sci. Eng., 1984, vol. 64, p. 157.
19. P.A. Beck and H. Hu: Trans. AIME, 1952, vol. 194, p. 83.
20. E. Nes: J. Mater. Sci. Lett., 1978, vol. 13, p. 2052.
21. O. Engler: Metall. Mater. Trans. A, 1999, vol. 30A, p. 1517.
22. S.G. Chowdhury, S. Das, and P.K. De: Acta Metall., 2005, vol. 53, p. 3951.
23. K. Pawlik: Phys. Stat. Sol., 1986, vol. 134, p. 477(b).
24. J. Hirsch and K. Luecke: Acta Mater., 1988, vol. 36, p. 2863.
25. R.H. Richman and Y.C. Liu: Trans. AIME, 1961, vol. 221, p. 720.
26. K.H. Virnich and K. Lucke: ICOTOM, 1978, vol. 5, p. 397.
27. J. Hirsch: Seventh Riso Intl. Symposium, edited by N. Hansen et al., 1986, p. 349.
28. J. Savoie and K. Luecke: Textures and Microstructures, 1991, vol. 14/18, p. 897.
29. F. Adock: J. Inst. Metals, 1922, vol. 27, p. 73.
30. C. Donadille, R. Valle, P. Dervin, and R. Penelle: Acta Metall., 1989, vol. 37, p. 1547.
31. R.L. Fullman and J.C. Fisher: J. Appl. Phys., 1951, vol. 22, p. 1350.
32. P.J. Goodhew: Metal. Sci., 1979, vol. 13, p. 108.
33. H. Gleiter: Acta Metall., 1969, vol. 17, p. 1421.
34. P.J.T. Stuitje and G. Gottstein: Z. Metallkd., 1980, vol. 71, p. 279.
35. A. Berger, P.-J. Wilbrandt, F. Ernst, U. Klement, and P. Hassen: Prog. Mater. Sci., 1988, vol. 32, p. 1.
36. C. Escher and G. Gottstein: Acta Mater., 1988, vol. 46, p. 525.
37. J. Grewen, T. Noda, and D. Sauer: Z. Metallkd., 1977, vol. 68, p. 260.
38. A.A. Ridha and W.B. Hutchinson: Acta Metall., 1982, vol. 30, p. 1929.
39. W.B. Hutchinson, F.M.C. Besag, and C.V. Honess: Acta Metall., 1973, vol. 21, p. 1685.
40. J. Huber and M. Hatherly: Metal. Sci., 1979, vol. 13, p. 665.
41. K. Luecke: Canada. Met. Quart., 1974, vol. 13, p. 261.
42. K. Sztwiertnia and F. Haessner: 16th Riso Intl. Symposium, edited by N. Hansen, 1995, p. 565.
43. B. Plege: Seventh Riso Intl. Symposium, edited by N. Hansen et al., 1986, p. 493.
44. G. Gottstein: Acta Metall., 1984, vol. 32, p. 1117.
45. U. Koehler and H.J. Bunge: ICOTOM, 1996, vol. 11, p. 497.