Midply wood shear wall system: Concept and performance in static and cyclic testing

Journal of Structural Engineering

Volumn 132, Issue 9, 2006, Pages 1417-1425

  Varoglu, Erol ^a   Karacabeyli, Erol ^c   Stiemer, Siegfried ^b   Ni, Chun ^c  

^a Intelligent Solutions   (Canada)

^b UNIVERSITY OF BRITISH COLUMBIA   (Canada)

^c FORINTEK CANADA CORP   (Canada)

Author keywords

Conceptual design; Connections; Cyclic tests; Experimental data; Failures; Shear walls; Static tests; Structural response; Wood structures

Indexed keywords

CYCLIC LOADS; FAILURE ANALYSIS; STRUCTURAL DESIGN; WOOD;

CONCEPTUAL DESIGN; CYCLIC TESTS; EXPERIMENTAL DATA; STATIC TESTS; STRUCTURAL RESPONSE; WOOD STRUCTURES;

SHEAR WALLS;

FAILURE; STRUCTURAL DESIGN; WALLS; WOOD;

EID: 33747334074     PISSN: 07339445     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0733-9445(2006)132:9(1417)     Document Type: Article

References (22)

1. ASTM. (1994), "Standard method of static load test for shear resistance of framed walls for buildings." ASTM E 564-76, West Conshohocken, Pa.
2. Building Research Institute of Ministry of Construction (BRI). (1996). "A survey report for building damages due to 1995 Hyogo-ken Nanbu Earthquake." Japan.
3. Bruneau, M. (1990). "Preliminary report of structural damage from the Loma Prieta (San Francisco) Earthquake of 1989 and pertinence to Canadian structural engineering practice." Can. J. Civ. Eng., 17(2), 198-208.
4. Dinehart, D. W., and Shenton, H. W., III (1998). "Comparison of statistic and dynamic response of timber shear walls." J. Struct. Eng., 124(6), 686-695.
5. Dolan, J. D., and White, M. W. (1992). "Design considerations for using adhesives in shear walls." J. Struct. Eng., 118(12), 3473-3479.
6. Durham, J., Lam, F., and Prion, H. G. L. (2001). "Seismic resistance of wood shear walls with large OSB panels. "J. Struct. Eng., 127(12), 1460-1466.
7. FEMA. (2001). "NEHRP recommended provisions for seismic regulations for new buildings and other structures." Building Seismic Safety Council, Washington, D.C.
8. Hamburger, R. O., and McCormick, D. L. (1997). "Earthquake performance of modem wood structures: Lessons from 1994 Northridge Earthquake." Earthquake performance and safety of structures, Forest Products Society, Madison, Wis., 77-82.
9. He, M., Magnusson, H., Lam, F., and Prion, H. G. L. (1999). "Cyclic performance of perforated wood shear walls with oversize OSB panels." J. Struct. Eng., 125(1), 10-18.
10. International Organization for Standardization (ISO). (2003). "Timber structures - Joints made with mechanical fasteners - Quasi-static reversed-cyclic test method." ISO-16670, Geneva, Switzerland.
11. Jones, S. N., and Fonseca, F. S. (2002). "Capacity of oriented strand board shear walls with overdriven sheathing nails." J. Struct. Eng., 128(7), 898-907.
12. Karacabeyli, E. (1995). "Lateral resistance of shear walls subjected to static and cyclic displacements." Res. Rep. Presented at FPS 49th Annual Meeting, Portland, Ore.
13. Karacabeyli, E., and Ceccotti, A. (1996). "Test results on the lateral resistance of nailed shear walls." Proc., Int. Wood Engineering Conf., Vol. 2, 179-186.
14. Karacabeyli, E., and Ceccotti, A. (1998). "Nailed wood-frame shear walls for seismic loads: Test results and design considerations." Proc., Structural Engineering Worldwide Paper No. T207-6, Elsevier Science, New York.
15. Lam, F., Prion, H. G. H., and He, M. (1997). "Lateral resistance of wood shear walls with large sheathing panels." J. Struct. Eng., 123(12), 1666-1673.
16. Peterson, J. (1983). "Bibliography on lumber and wood panel diaphragms." J. Struct. Eng., 109(12), 2838-2852.
17. Pacific Fire Rating Bureau (PFRB. (1971). "San Fernando Earthquake February 9, 1971, Section 1." San Francisco.
18. Prion, G. L. H., and Filiatrault, A. (1995). "Performance of timber structures during the Hyogo-ken Nanbu Earthquake of January 17. 1995." Can. J. Civ. Eng., 23, 652-664.
19. Rainer, J. H., and Karacabeyli, E. (1999). "Performance of wood-frame building construction in earthquakes." Forintek special publication no. SP- 40, Forintek Canada Corp., Vancouver, Canada.
20. Structural Engineers Association of Southern California (SEAOSC). (1997). "Standard method of cyclic (reversed) load tests of framed shear walls for buildings." Whittier, Calif.
21. Tissell, J. R. (1993). "Structural panel shear walls." Res. Rep. No. 154, American Plywood Association, Tacoma, Wash,
22. van de Lindt, J. W. (2004). "Evolution of wood shear wall testing, modeling, and reliability analysis: Bibliography." Pract. Period. Struct. Des. Constr., 9(1), 44-53.