Columnar to equiaxed grain transition in as solidified alloys

International Materials Reviews

Volumn 51, Issue 4, 2006, Pages 247-269

  Spittle, J A ^a  

^a SWANSEA UNIVERSITY   (United Kingdom)

Author keywords

As solidified alloys; Columnar to equlaxed grain transition; Modelling

Indexed keywords

ALLOYING ELEMENTS; GRAIN BOUNDARIES; GRAIN GROWTH; MATHEMATICAL MODELS; SOLIDIFICATION;

AS SOLIDIFIED ALLOYS; COLUMNAR GROWTH; COLUMNAR TO EQULAXED GRAIN TRANSITION; MODELING;

PHASE TRANSITIONS;

EID: 33747164548     PISSN: 09506608     EISSN: None     Source Type: Journal    
DOI: 10.1179/174328006X102493     Document Type: Review

References (98)

1. J. A. Spittle: Mater. Sci. Technol., 2005, 21, 546.
2. T. E. Quested and A. L. Greer: Acta Mater., 2005, 53, 4643.
3. J. E. Stead: Engineering, 1906, 82, 4054.
4. H. M. Howe: J. Iron Steel Inst., 1916, 94, 181.
5. R. Genders: J. Inst. Met., 1926, 35, 259.
6. F. R. Hensel: PhD thesis, University of Berlin, 1929.
7. W. A. Tiller, K. A. Jackson, J. Rutter and B. Chalmers: Acta Metall., 1953, 1, 428.
8. S. C. Flood and J. D. Hunt: ASM Metal Handbook, 1990, 15, 130.
9. S. E. Kisakurek: 'Formation of the equiaxed zone in ingot castings', Bogazici University Research Centre Publications No. 104, Istanbul, 1981.
10. J. Hutt and D. St. John: Int. J. Cast Met. Res., 1998, 11, 13.
11. L. Northcott: J. Inst. Met., 1938-39, 65, 173.
12. W. C. Winegard and B. Chalmers: Trans. ASM., 1954, 216, 1214.
13. B. Chalmers: Aust. J. Inst. Met., 1963, 8, 255.
14. K. A. Jackson, J. D. Hunt, D. R. Uhlmann and T. P. Seward, III: Trans. AIME, 1966, 236, 149.
15. R. T. Southin: Trans. Met. Soc. AIME, 1967, 239, 220.
16. A. Ohno, T. Motegi and H. Soda: Trans. ISIJ, 1971, 11, 18.
17. B. P. Pearce and H. W. Kerr: Metall. Trans. B, 1981, 12B, 479.
18. J. L. Walker: in 'Physical chemistry of process metallurgy, II', 845; 1961, New York, Interscience.
19. G. S. Cole and G. F. Boiling: Trans. AIME, 1965, 233, 1568.
20. H. Biloni and B. Chalmers: J. Mater. Sci., 1968, 3, 139.
21. L. A. Tarshis, J. L. Walker and J. W. Rutter: Metall. Trans., 1971, 2, 2589.
22. J. A. Spittle and S. Sadli: Mater. Sci. Technol., 1995, 11, 533.
23. R. D. Doherty, P. D. Cooper, M. H. Bradbury and F. J. Honey: Metall. Trans. A, 1977, 8A, 397.
24. M. Abdel-Reihim, N. Hess, W. Reif and M. E. J. Birch: J. Mater. Sci., 1987, 22, 213.
25. J. A. Spittle, J. M. Keeble and M. Al Meshhedani: in 'Light metals 1997', (ed. R. Huglen), 795-800; 2001, Warrendale, PA, TMS.
26. J. A. Spittle: Met. Sci., 1977, 11, 578.
27. T. S. Plaskett and W. C. Winegard: Trans. ASM, 1959, 51, 222.
28. R. Elliott: British Foundryman, 1964, 9, 398.
29. W. A. Tiller: Trans. Met. Soc. AIME, 1962, 224, 448.
30. R. B. Mahapatra and F. Weinberg: Metall. Trans. B, 1987, 18B, 425.
31. I. Ziv and F. Weinberg: Metall. Trans. B, 1989, 20B, 731.
32. J. D. Hunt: Mater. Sci. Eng., 1984, 65, 75.
33. V. K. Suri, N. El-Kaddah and J. T. Berry: Trans. AFS, 1991, 99, 187.
34. S. Kim and R. N. Grugel: Metall. Trans. A, 1992, 23A, 1807.
35. L. J. Ledgard and D. G. McCartney: Proc. 4th Decennial Int. Conf. on 'Solidification processing', Sheffield, UK, 1997, 227.
36. T. M. Pollock and W. H. Murphy: Metall. Mater. Trans. A, 1996, 27A, 1081.
37. Ch.-A. Gandin: ISIJ Int., 2000, 40, 971.
38. A. E. Ares and C. E. Schvezov: Metall. Mater. Trans. A, 2000, 31A, 1611.
39. M. A. Martorano and J. D. T. Capocchi: Int. J. Cast Met. Res., 2000, 13, 49.
40. C. A. Siqueira, N. Cheung and A. Garcia: Metall Mater. Trans. A, 2002, 33A, 2107.
41. M. Vandyoussefi and A. L. Greer: Acta Mater., 2002, 50, 1693.
42. Calcom SA, Parc Scientifique EPFL, Lausanne, Switzerland.
43. Ch.-A. Gandin and M. Rappaz: Acta Metall Mater., 1994, 42, 2233.
44. L. Sturz, A. Drevermann, C. Pickmann and G. Zimmermann: Mater. Sci. Eng., 2005, A 413-414, 379.
45. M. A. Martorano, C. Beckermann and Ch.-A. Gandin: Metall. Mater. Trans. A, 2003, 34A, 1657.
46. G. Reinhart, N. Mangelinck-Noel, H. Nguyen-Thi, T. Schenk, J. Gastaldi, B. Billia, P. Pino, J. Hartwig and J. Baruchel: Mater. Sci. Eng. A, 2005, 413-414, 384.
47. D. R. Uhlmann, T. P. Seward and B. Chalmers: Trans. AIME, 1966, 236, 527.
48. G. S. Cole and G. F. Boiling: Trans. AIME, 1966, 236, 1366.
49. G. S. Cole and G. F. Boiling: Trans. AIME, 1967, 239, 1824.
50. R. Morando, H. Biloni, G. S. Cole and G. F. Boiling: Metall. Trans. A, 1970, 1A, 1405.
51. G. S. Cole, K. W. Casey and G. F. Boiling: Metall. Trans. A, 1970, 1A, 1413.
52. R. J. McDonald and J. D. Hunt: Trans. AIME, 1969, 245, 1993.
53. P. M. Thomas and J. A. Spittle: J. Inst. Met., 1971, 99, 167.
54. G. S. Cole and G. F. Boiling: Trans. AIME, 1968, 243, 1568.
55. G. S. Cole and G. F. Boiling: Trans. AIME, 1969, 245, 725.
56. J. A. Spittle, G. W. Delamore and R. W. Smith: 'The solidification of metals', Iron and Steel Institute Publication 110, 318; 1968, London, Iron and Steel Institute.
57. W. D. Griffiths and D. G. McCartney: Mater. Sci. Eng., 1996, A216, 47.
58. B. Willers, S. Eckert, U. Michel, I. Haase and G. Zouhar: Mater. Sci. Eng., 2005, A402, 55.
59. S. Eckert, B. Willers, P. A. Nikrityuk, K. Eckert, U. Michel and G. Zouhar: Mater. Sci. Eng., 2005, A413-414, 211.
60. H. Fredriksson and M. Hillert: Metall. Trans., 1972, 3, 565.
61. H. Fredriksson and A. Olsson: Mater. Sci. Technol., 1986, 2, 508.
62. M. H. Burden and J. D. Hunt: Metall. Trans. A, 1975, 6A, 240.
63. S. Witzke, J. P. Riquet and F. Durand: Acta Metall., 1981, 29, 365.
64. J. Lipton, W. Kurz and W. Heinemann: Concast Technol News, 1983, 22, 4.
65. J. Lipton, W. Heinemann and W. Kurz: Arch. Eisenhuttenwes., 1984, 55, 195.
66. Ch.-A. Gandin: Acta Mater., 2000, 48, 2483.
67. L. Nastac: Acta Mater., 1999, 47, 4253.
68. H. B. Dong and P. D. Lee: Acta Mater., 2005, 53, 659.
69. S. C. Flood and J. D. Hunt: 'Modeling of casting and welding processes II', 207; 1983, American Institute of Mining, Metallurgical and Petroleum Engineers.
70. S. C. Flood and J. D. Hunt: J. Cryst. Growth, 1987, 82, 552.
71. E. Scheil: Z. Metallkd., 1942, 34, 70.
72. J. A. Spittle and M. R. Tadayon: Cast Met., 1994, 7, 123.
73. S. G. R. Brown and J. A. Spittle: in 'Modeling of casting, welding and advanced solidification processes V, 395; 1991, Warrendale, PA, TMS.
74. C. Y. Wang and C. Beckermann: Metall. Mater. Trans. A, 1994, 25A, 1081.
75. C. Beckermann and C. Y. Wang: JOM, 1994, 42.
76. C. Y. Wang and C. Beckermann: Metall. Trans. A, 1993, 24A, 2787.
77. S. L. Cockcroft, M. Rappaz, A. Mitchell, J. Femihough and A. J. Schmalz: in 'Materials for advanced power engineering, part II', (ed. D. Coutsouradis et al.), 1145; 1994, Netherlands, Kluwer Academic Publishers.
78. W. Kurz, B. Giovanola and T. R. Trivedi: Acta Metall., 1986, 34, 823.
79. M. Rappaz: Int. Mater. Rev., 1989, 34, 93.
80. M. Gaumann, R. Trivedi and W. Kurz: Mater. Sci. Eng., 1997, A226-228, 763.
81. A. L. Greer, A. M. Bunn, A. Tronche, P. V. Evans and D. J. Bristow: Acta Mater., 2000, 48, 2823.
82. A. Ludwig and M. Wu: Mater. Sci. Eng., 2005, A413-414, 109.
83. S. G. R. Brown and J. A. Spittle: Mater. Sci. Technol., 1989, 5, 362.
84. J. A. Spittle and S. G. R. Brown: J. Mater. Sci., 1989, 23, 1777.
85. J. A. Spittle and S. G. R. Brown: Acta Metall., 1989, 37, 1803.
86. S. G. R. Brown and J. A. Spittle: Cast Met., 1990, 3, 18.
87. M. Rappaz and Ch.-A. Gandin: Acta Metall. Mater., 1993, 41, 345.
88. J. A. Spittle and S. G. R. Brown: in 'Numerical methods in thermal problems, volume VI', (ed. R. W. Lewis and K. Morgan), 291; 1989, Swansea, Pineridge Press.
89. P. Zhu and R. W. Smith: Acta Metall. Mater., 1992, 40, 3369.
90. R. C. Atwood and P. D. Lee: Metall. Mater. Trans., B, 2002, 33B, 209.
91. R. H. Davies, A. T. Dinsdale, T. G. Chart, T. I. Barry and M. H. Rand: High Temp. Sci., 1990, 26, 251.
92. C. Beckermann, A. Badillo and J. C. Ramirez: Invited Lecture, JOM, 57(2), TMS Annual Meeting and Exhibition Program and Guide, 2005, 33.
93. G. J. Davies and J. G. Garland: Int. Met. Rev., 1975, 20, 83.
94. S. A. David and J. M. Vitek: Int. Mater. Rev., 1989, 34, 213.
95. S. A. David and J. M. Vitek: in 'International trends in welding science and technology', (ed. S. A. David and J. M. Vitek), 147; 1993, Materials Park, OH, ASM International.
96. H. W. Kerr: in 'International trends in welding science and technology', (ed. S. A. David and J. M. Vitek), 117; 1993, Materials Park, OH, ASM International.
97. J. Clarke, D. C. Weckman and H. W. Kerr: in 'Modeling of casting, welding and advanced solidification processes VIII', (ed. B. G. Thomas and C. Beckermann), 391; 1998, Warrendale, PA, TMS.
98. G. Hansen, A. Hellawell, S. Z. Lu and R. S. Steube: Metall. Mater. Trans. A, 1996, 27A, 569.