Film-cooling prediction on turbine blade tip with various film hole configurations

Journal of Thermophysics and Heat Transfer

Volumn 20, Issue 3, 2006, Pages 558-568

  Yang, Huitao ^a,b,c   Chen, Hamn Ching ^a,c   Han, Je Chin ^a,b,c  

^a TEXAS A AND M UNIVERSITY   (United States)

^b Turbine Heat Transfer Laboratory   (United States)

^c AIAA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COOLING; HEAT TRANSFER; LEAKAGE (FLUID); MATHEMATICAL MODELS; REYNOLDS NUMBER; TURBULENCE;

BLADE TIP; FILM COOLING; FILM HOLE CONFIGURATIONS; TURBINE BLADES;

TURBOMACHINE BLADES;

COOLING; HEAT TRANSFER; LEAKAGE (FLUID); MATHEMATICAL MODELS; REYNOLDS NUMBER; TURBOMACHINE BLADES; TURBULENCE;

EID: 33747054556     PISSN: 08878722     EISSN: 15336808     Source Type: Journal    
DOI: 10.2514/1.18422     Document Type: Article

References (24)

1. Metzger, D. E., Bunker, R. S., and Chyu, M. K., "Cavity Heat Transfer on a Transverse Grooved Wall in a Narrow Flow Channel," Journal of Heat Transfer, Vol. 111, No. 1, 1989, pp. 73-79.
2. Chyu, M. K., Moon, H. K., and Metzger, D. E., "Heat Transfer in the Tip Region of Grooved Turbine Blades," Journal of Turbomachinery, Vol. 111, No. 2, 1989, pp. 131-138.
3. Kim, Y. W., Abdel-Messeh, W., Downs, J. P., Soechting, F. O., Steuber, G. D., and Tanrikut, S., "A Summary of the Cooled Turbine Blade Tip Heat Transfer and Film Effectiveness Investigation Performed by Dr. D. E. Metzger," American Society of Mechanical Engineers, Paper 94-GT-167, June 1994.
4. Bunker, R. S., Baily, J. C., and Ameri, A. A., "Heat Transfer and Flow on the First Stage Blade Tip of a Power Generation Gas Turbine: Part 1: Experimental Results," Journal of Turbomachinery, Vol. 122, No. 2, 2000, pp. 272-277.
5. Bunker, R. S., and Baily, J. C., "Effect of Squealer Cavity Depth and Oxidation on Turbine Blade Heat Transfer," American Society of Mechanical Engineers, Paper 2001-GT-0155, June 2001.
6. Dunn, M. G., and Haldeman, C. W., "Time-Averaged Heat Flux for a Recessed Tip, Lip, and Platform of a Transonic Turbine Blade," Journal of Turbomachinery, Vol. 122, No. 4, 2000, pp. 692-697.
7. Bunker, R. S., "A Review of Turbine Blade Tip Heat Transfer," Annals of the New York Academy of Sciences, Vol. 934, 2001, pp. 64-79.
8. Azad, G. M. S., Han, J. C., and Teng, S., "Heat Transfer and Pressure Distribution on a Gas Turbine Blade Tip," American Society of Mechanical Engineers, Paper 2000-GT-194, June 2000.
9. Azad, G. M. S., Han, J. C., and Boyle, R., "Heat Transfer and Pressure Distribution on the Squealer Tip of a Gas Turbine Blade Tip," American Society of Mechanical Engineers, Paper 2000-GT-195, June 2000.
10. Saxena, V., Nasir, H., and Ekkad, S. V., "Effect of Blade Tip Geometry on Tip Flow and Heat Transfer for a Blade in a Low Speed Cascade, " American Society of Mechanical Engineers, Paper GT-2003-38176, June 2003.
11. Kwak, J. S., Ahn, J., Han, J. C., Lee, C. P., Bunker, R. S., Boyle, R., and Gaugler, R., "Heat Transfer Coefficients on the Squealer Tip and Near Tip Regions of a Gas Turbine Blade with Single or Double Squealer," American Society of Mechanical Engineers, Paper GT-2003-38907, June 2003.
12. Ameri, A. A., Steinthorsson, E., and Rigby, D. L., "Effect of Tip Clearance and Casing Recess on Heat Transfer and Stage Efficiency in Axial Turbines," Journal of Turbomachinery, Vol. 121, No. 4, 1999, pp. 683-693.
13. Ameri, A. A., and Rigby, D. L., "A Numerical Analysis of Heat Transfer and Effectiveness of Film Cooled Turbine Blade Tip Model," NASA CR, 99-209165, June 1999.
14. Ameri, A. A., and Bunker, R, S., "Heat Transfer and Flow on the First Stage Blade Tip of a Power Generation Gas Turbine: Pan 2: Simulation Results," Journal of Turbomachinery, Vol. 122, No. 2, 2000, pp. 272-277.
15. Ameri, A. A., "Heat Transfer and Flow on the Blade Tip of a Gas Turbine Equipped with a Mean-Camberline Strip," Journal of Turbomachinery, Vol. 123, No. 4, 2001, pp. 704-708.
16. Yang, H., Acharya, S., and Ekkad, S., "Flow and Heat Transfer Predictions of a Plane Tip Turbine Blade," American Society of Mechanical Engineers, Paper 2002-GT-30190, June 2002.
17. Yang, H., Acharya, S., and Ekkad, S., "Numerical Simulation of Flow and Heat Transfer past a Turbine Blade with a Squealer Tip," American Society of Mechanical Engineers, Paper 2002-GT-30193, June 2002.
18. Kwak, J. S., and Han, J. C., "Heat Transfer Coefficient and Film Cooling Effectiveness on a Gas Turbine Blade Tip," American Society of Mechanical Engineers, Paper GT-2002-30194, June 2002.
19. Kwak, J. S., and Han, J. C., "Heat Transfer Coefficient and Film Cooling Effectiveness on the Squealer Tip of a Gas Turbine Blade," American Society of Mechanical Engineers, Paper GT-2002-30555, June 2002.
20. Acharya, S., Yang, H., and Ekkad, S., "Numerical Simulation of Film Cooling on the Tip of a Gas Turbine Blade," American Society of Mechanical Engineers, Paper GT-2002-30553, June 2002.
21. Hohlfeld, E. M., Christophel, J. R., Couch, E. L., and Thole, K. A., "Predictions of Cooling Flow Dirt Purge Holes Along the Tip of a Turbine Blade," American Society of Mechanical Engineers, Paper GT-2003-38251, June 2003.
22. Yang, H., Chen, H.-C., and Han, J.-C., "Flow and Heat Transfer on Turbine Rotor with Various Tip Configurations," Journal of Thermophysics and Heat Transfer, Vol. 20, No. 1, 2006, pp. 80-91.
23. Ahn, J., Mhetras, S. P., and Han, J. C., "Film Cooling Effectiveness on a Gas Turbine Blade Tip and Shroud Using PSP," American Society of Mechanical Engineers, Paper GT-2004-53249, June 2004.
24. Fluent User's Guide [CD-ROM], Ver. 6.1, Fluent, Inc., Lebanon, NH, 2003.