Simulation of heat transfer and residual stresses from cooling curves obtained in quenching studies

Journal of ASTM International

Volumn 3, Issue 5, 2006, Pages

  Penha, Renata N ^a   Canale, Lauralice C F ^a   Totten, George E ^a   Sarmiento, Gustavo S ^a   Ventura, Jaime M ^a  

^a NONE

Author keywords

Heat transfer coefficient; Quenchants; Quenching; Residual stresses; Simulation

Indexed keywords

COMPUTER SIMULATION; HEAT TRANSFER COEFFICIENTS; HEAT TREATMENT; MINERAL OILS; RESIDUAL STRESSES;

POTENTIAL BENEFITS; POTENTIAL IMPACT; QUENCH OILS; QUENCHANTS;

QUENCHING;

EID: 33746881762     PISSN: None     EISSN: 1546962X     Source Type: Journal    
DOI: None     Document Type: Article

References (21)

1. Totten, G. E., Dakins, M. E., and Heins, R. W., "Cooling Curve Analysis of Synthetic Quenchants - A Historical Perspective," Vol. 6, 1988, pp. 87-95.
2. Liscic, B. and Totten, G. E., "From GM Quenchometer Via Cooling Curve Analysis to Temperature Gradient Method," in 18th Heat Treatment Society Conference Proceedings, H. Walton and R. Wallis, Eds., ASM International, Materials Park, OH, 1998, pp. 601-609.
3. Bates, C. E. and Totten, G. E., "Quantifying Quench-Oil Cooling Characteristics," Adv. Mat. & Proc., 1991, pp. 25-28.
4. Canale, l. C. F. and Totten, G. E., "Overview of Distortion and Residual Stress, Due to Quench Processing - Part I: Factors Affecting Quench Processing," Int. J. Materials and Product Technology, Vol. 24, No. 1-4, 2005, pp. 4-52.
5. Sarmiento, G. S., Chen, X., Vega, J., Totten, G. E., Reynoldson, R., Huynh, L., and Meekisho, L., "A Comparison on Cooling Curve Analysis Using Inc-Phatran and Winprobe," Proceedings of the 20th Heat Treating Society Conference and Exposition, K. Funatani and G. E. Totten, Eds., ASM International, Materials Park, OH, 2000, pp. 659-665.
6. MacKenzie, D. S., Totten, G. E., and Webster, G. M., "Quenching Fundamentals: Heat Transfer," Proceedings of the International Conference on Quenching and Control of Distortion, G. E. Totten, K. Funatani, M. A. H. Howes, and S. Sjostrom, Eds., ASM International, Materials OH, 1996, pp. 329-340.
7. Totten, G. E., Bates, C. E., and Clinton, N. A., "Chapter 3 - Cooling Curves Analysis," in Handbook of Quenchants and Quenching Technology, ASM International, Materials Park, OH, 1993, pp. 69-128.
8. Guisebert, D. A., "Correlation of Magnetic Quenchometer to Cooling Curve Analysis Test Method," Proceedings of the 16th ASM Heat Treating Society Conference and Exposition, J. L. Dossett and R. E. Luetje, Eds., ASM International, Materials Park, OH, 1996, pp. 451-460.
9. Guisebert, D. A. and Moore, D. L., "Influence of Test Conditions on Cooling Curve Test Results," 1st International Automotive Heat Treating Conference, R. Colas, K. Funatani, and C. A. Stickles, Eds., Materials Park, OH, 1998, pp. 449-455.
10. Liscic, B., Tensi, H. M., Totten, G. E., and Webster, G. M., "Non-Lubricating Process Fluids: Steel Quenching Technology," in Fuels and Lubricants Handbook: Technology, Properties, Performance and Testing, G. E. Totten, S. R. Westbrook, and R. J. Shah, Eds., ASTM International, West Conshohocken, PA, 2003, pp. 587-634.
11. Clark, J. and Tye, R., "Thermophysical Properties Reference Data for Some Key Engineering Alloys," High temperatures - high pressures, Vol. 35/36, 2003/2004, pp. 1-14.
12. Special Metals, "Physical Constants and Thermal Properties," URL: http://www.specialmetals.com/documents/Inconel%20alloy%20600.pdf, accessed July 20, 2005.
13. Sarmiento, G. S., Gastón, A., and Vega, J., "Inverse Heat Conduction Coupled with Phase Transformation Problems in Heat Treating Process," Computational Mechanics - New Trends and Applications, E. Oñate and S. R. Idelsohn Eds., CIMNE, Barcelona, 1998, CD-Book. Part VI, Section 1, Paper 16.
14. Sarmiento, G. S., Morelli, M. A., and Vega, J., "Improvements to the SAE J406: Hardenability Predictor," R. Colás et al., Eds., Proceedings of the 1st International Automotive Heat Treating Conference, ASM International, Puerto Vallarta, July 13-15, 1998, pp. 401-414.
15. Sarmiento, G. S. and Vega, J., "Calculation of the Hardness Space Distribution in the As Quenched Condition of a Medium Hardening Tool Steel," J. Shanghai Jiaotong University, Vol. E-5, No. 1, 2000, pp. 351-361.
16. Sarmiento, G. S., Coscia, D. M., Jouglard, C., Totten, G. E., Webster, G. M., and Vega, J., "Residual Stresses, Distortion and Heat Transfer Coefficients of 7075 Aluminum Alloy Probes Quenched in Water and Polyalkylene Glycol Solutions," in Heat Treating - Proceedings of the 20th Conference, Vol. 2, K. Funatani and G. E. Totten, Eds., October, 9-12, 2000, ASM International, Materials Park, OH, pp. 1118-1124.
17. Felde, I., Réti, T., Sarmiento, G. S., Palandella, M. G., Totten, G. E., and Chen, X. L., "Effect of Smoothing Methods on the Results of Different Inverse Modeling Techniques," in Heat Treating - Proceedings of the 21st Conference, S. Shrivastava and F. Specht, Eds., November 5-8, 2001, ASM International, Materials Park, OH, pp. 76-83.
18. Sanchez-Sarmiento, G., Castro, M., Totten, G. E., Webster, G. M., Jarvis, L., and Cabré, M. F., "Modeling Residual Stresses in Spring Steel Quenching," in Heat Treating - Proceedings of the 21st Conference, S. Shrivastava and F. Specht, Eds., November 5-8, 2001, ASM International, Materials Park, OH, pp. 191-200.
19. ABAQUS, Inc.: ABAQUS V 6.4 User's Manual. Providence, RI, 2004.
20. Totten, G. E., Bates, C. E., and Clinton, N. A., "Chapter 4 - Quenching Oils," in Handbook of Quenchants and Quenching Technology, ASM International, Materials Park, OH, 1993, pp. 129-160.
21. Inoue, T., Funatani, K., and Totten, G. E., "Process Modeling for Heat Treatment: Current Status and Future Developments," J. Shanghai Jiaotong University, Vol. E-5, No. 1, 2000, pp. 14-25.