Thermal residual stress relaxation in powder metal IN100 superalloy

Journal of ASTM International

Volumn 3, Issue 5, 2006, Pages

  Buchanan, Dennis J ^a   John, Reji ^b   Ashbaugh, Noel E ^a  

^a UNIVERSITY OF DAYTON   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

Cold work; IN100; Residual stress; Shot peen; Stress relaxation; Superalloy; Thermal exposure; Thermal relaxation; X ray

Indexed keywords

COLD WORKING; COMPRESSIVE STRENGTH; IRRADIATION; POWDER METALLURGY; RESIDUAL STRESSES; STRESS RELAXATION; THERMAL EFFECTS; THERMAL LOAD; X RAY DIFFRACTION;

COLD WORK; IN100; SHOT PEEN; THERMAL EXPOSURE; THERMAL RELAXATION; X-RAY;

SUPERALLOYS;

EID: 33746863739     PISSN: None     EISSN: 1546962X     Source Type: Journal    
DOI: 10.1520/JAI12552     Document Type: Article

References (28)

1. Scott, J. A., "The Influence of Processing and Metallurgical Factors on Fatigue," Metal Fatigue: Theory and Design, A. F. Madayag, Ed., John Wiley & Sons, Inc., New York, 1969.
2. Jilia, R., Renzhi, W., and Xiangbin, L., "Investigation of Shot Peening Strengthening of René'95 Powder Alloy," Proceedings of the 6th International Conference on Shot Peening, San Francisco, CA, 1996, pp. 338-347.
3. Happ, M. B., Mourer, D. P., and Schmidt, R. L., "Residual Stress Analysis and LCF Test Results for Peened Bolt Hole and Dovetail Configurations," Proceedings of ASM's Conference on Residual Stress - In Design, Process and Materials Selection, W. B. Young, Ed., Cincinnati, OH, April 1987, pp. 127-136.
4. Akber, J. A., Kyriacou, S., and El-Zafrany, A. M., "Effect of Shot Peening on the Fatigue Life of Axially Loaded Notched Components," Proceedings of the 5th International Conference on Shot Peening, Christ Church Oxford University, 1993, pp. 349-358.
5. Gray, H., Wagner, L., and Lütjering, G., "Influence of Shot Peening Induced Surface Roughness, Residual Macrostresses and Dislocation Density on the Elevated Temperature HCF-properties of Ti Alloy," Proceedings of the 3rd International Conference on Shot Peening, H. Wohlfahrt, R. Kopp, and O. Vöhringer, Eds., Garmisch-Partenkirchen (FRG), 1987, pp. 447-457.
6. Fuchs, H. O., "Approximate Analysis for Optimizing Prestress Treatments," Analytical and Experimental Methods for Residual Stress Effects in Fatigue, ASTM STP 1004, R. L. Champoux, J. H. Underwood, and J. A. Kapps, Eds., ASTM International, West Conshohocken, PA, 1988, pp. 13-20.
7. Kyriacou, S., "Shot-peening Mechanics, A Theoretical Study," Proceedings of the 6th International Conference on Shot Peening, San Francisco, CA, 1996, pp. 505-516.
8. Fathallah, R., Inglebert, G., and Castex, L., "Modeling of Shot Peening Residual Stresses and Plastic Deformation Induced in Metallic Parts," Proceedings of the 6th International Conference on Shot Peening, San Francisco, CA, 1996, pp. 464-473.
9. Wohlfahrt, H., "A Model for Predicting Residual Stresses Produced by Shot Peening," Proceedings of the European Conference on Residual Stresses, E. Macherauch and V. Hauk, Eds., Translated from the German by Janet Mordike, Karlsruhe, 1983, pp. 347-364.
10. Wusatowska-Sarnek, A. M., Blackburn, M. J., and Aindow, M., "Techniques for Microstructural Characterization of Powder-processed Nickel-based Superalloys," Mater. Sci. Eng., A 360, 2003, pp. 390-395.
11. Wusatowska-Sarnek, A. M., Ghosh, G., Olson, G. B., Blackburn, M. J., and Aindow, M., "Characterization of the Microstructure and Phase Equilibria Calculations for the Powder Metallurgy Superalloy IN100," J. Mater. Res., 1.8 (11), 2003, pp. 2653-2663.
12. Hartman, G. A., Ashbaugh, N. E., and Buchanan, D. J., "A Sampling of Mechanical Test Automation Methodologies Used in a Basic Research Laboratory," Automation in Fatigue and Fracture: Testing and Analysis, ASTM STP 1231, C. Amzallag, Ed., ASTM International, West Conshohocken, PA, 1994, pp. 36-50.
13. Prevéy, P., Hornbach, D., and Mason, P., "Thermal Residual Stress Relaxation and Distortion in Surface Enhanced Gas Turbine Engine Components," Proceedings of the 17th Heat Treating Society Conference and Exposition and the 1st International Induction Heat Treating Symposium, D. L. Milam et al., Eds., ASM Materials Park, OH, 1998, pp. 3-12.
14. Prevéy, P., "The Effect of Cold Work on the Thermal Stability of Residual Compression in Surface Enhanced IN718," Proceedings: 20th ASM Materials Solutions Conference and Exposition, St. Louis, MO, October 10-12, 2000.
15. Shot Peening Applications, 8th ed., Metal Improvement Company, Inc., a subsidiary of Curtiss-Wright Corporation, Paramus, NJ.
16. Cao, W., Khadhraoui, M., Brenier, B., Guédou, J. Y., and Castex, L., "Thermomechanical Relaxation of Residual Stress in Shot Peened Nickel Base Superalloy," Mater. Sci. Technol., Vol. 10, November 1994, pp. 947-954.
17. Khadhraoui, M., Cao, W., Brenier, B., Castex, L., and Guédou, J. Y., "Experimental Investigation and Modeling of Relaxation Behavior of Shot Peening Residual Stresses at High Temperature for Nickel Base Superalloys," Mater. Sci. Technol., Vol. 13, April 1997, pp. 360-367.
18. Ahmad, J., Chandu, S., Kroupa, J., and Prevéy, P., "An Assessment of Residual Stresses Induced by Surface Treatments," Proceedings of the 6th National Turbine Engine High Cycle Fatigue Conference, HCF 2001, Jacksonville, FL, March 2001.
19. Prevéy, P., "The Measurement of Subsurface Residual Stress and Cold Work Distributions in Nickel Base Alloys," Proceedings of ASM's Conference on Residual Stress - In Design, Process and Materials Selection, William B. Young, Ed., Cincinnati, OH, April 1987, pp. 11-19.
20. Standard Test Method for Determining the Effective Elastic Parameter X-Ray Diffraction Measurements of Residual Stress, E 1426-98, Vol. 03.01, ASTM International, West Conshohocken, PA.
21. Prevéy, P., "X-ray Diffraction Residual Stress Techniques," Metals Handbook, Metals Park: American Society for Metals, 1986, pp. 380-392.
22. Residual Stress Measurement by X-Ray Diffraction, SAE J784a, M. E. Hilley, Ed., Soc. Auto. Eng., Warrendale, PA, Vol. 19, 1971.
23. Moore, M. G., and Evans, W. P., "Mathematical Correction for Stress in Removed Layers in X-ray Diffraction Residual Stress Analysis," SAE Trans., Vol. 66, 1958, pp. 340-345.
24. Vukelich, S., Berkley, S., Russ, S., and Bradley, E. F., "Residual Stress Measurement and its Application to Achieve Predicted Full Life Potential of Low Cycle Fatigue (LCF) Engine Disks," The 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 2002.
25. Vöhringer, O., "Relaxation of Residual Stresses," Proceedings of the European Conference on Residual Stresses, E. Macherauch and V. Hauk, Eds., Translated from German by Janet Mordike, Karlsruhe, 1983, pp. 47-80.
26. Hoffman, J., Scholtes, B., Vöhringer, O., and Macherauch, E., "Thermal Relaxation of Shot Peened Residual Stresses in the Differently Heat Treated Plain Carbon Steel Ck 45," Proceedings of the 3rd International Conference on Shot Peening, H. Wohlfahrt, R. Kopp and O. Vöhringer, Eds., Garmisch-Partenkirchen (FRG), 1987, pp. 239-247.
27. Schulze, V., Vöhringer, O., and Macherauch, E., "Thermal Relaxation of Shot Peened Residual Stresses in a Quenched and Tempered Steel 42 Cr Mo 4," Proceedings of the 5th International Conference on Shot Peening, Christ Church Oxford University, 1993, pp. 265-274.
28. Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation of Residual Stress Measurement, E 915-96, Vol. 03.01, ASTM International, West Conshohocken, PA.