Macroscopic and microscopic subdivision of a cold-rolled aluminium single crystal of cubic orientation

Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences

Volumn 454, Issue 1978, 1998, Pages 2555-2592

  Liu, Qing ^a   Hansen, Niels ^a  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

Author keywords

Crystal subdivision; Dislocation structure; Plastic deformation

Indexed keywords

EID: 33746802376     PISSN: 13645021     EISSN: None     Source Type: Journal    
DOI: 10.1098/rspa.1998.0271     Document Type: Article

References (57)

1. Akef, A. & Driver, J. H. 1991 Orientation splitting of cube-orientated face-centred cubic crystals in plane strain compression. Mater. Sci. Engng A 132, 245-255.
2. Barrett, C. & Levenson, L. H. 1939a Structure of iron after drawing, swaging and elongation in tension. Trans. Am. Inst. Min. Met. Engng 135, 327-352.
3. Barrett, C. & Levenson, L. H. 19396 The structure of aluminium after compression. Trans. Am. Inst. Min. Met. Engng 137, 112-127.
4. Bauer, R. E., Mecking, H. & Lucke, K. 1977 Textures of copper single crystals after rolling at room temperature. Mater. Sci. Engng 27, 163-180.
5. Bay, B., Hansen, N., Hughes, D. A. & Kuhlmann-Wilsdorf, D. 1992 Evolution of FCC deformation structures in polyslip. Acta Metall. Mater. 40, 205-219.
6. Decker, R., Butler, J. F., Hu, H. & Lalli, L. A. 1990 Analysis of an aluminium single crystal with unstable initial orientation (001) [110] in channel die compression. Metall. Trans. A 22, 45-58.
7. Bellier, S. P. & Doherty, R. D. 1977 The structure of deformed aluminium and its recrystallization - investigations with transmission Kossel diffraction. Acta Metall. 25, 521-538.
8. Butler, J. F. & Hu, H. 1989 Channel die compression of aluminium single crystals. Mater. Sci. Engng A 118, L29-L33.
9. Cahn, R. W. 1951 Slip and polygonization in aluminium. J. Inst. Met. 79, 129-158.
10. Chen, N. K. & Mathewson, C. H. 1951 Structural studies of plastic deformation in aluminium single crystals. J. Metals August, pp. 653-660.
11. Chin, G. Y. 1969 Texture in research and practice, p. 263. Berlin: Springer.
12. Cottrell, A. H. 1953 Dislocations and plastic flow in crystals. Oxford: Clarendon.
13. Dillamore, I. L. & Katoh, H. 1974 The mechanisms of recrystallization in cubic metals with particular reference to their orientation-dependence. Met. Sci. 8, 73-83.
14. Doherty, R. 1980 Nucleation of recrystallization in single phase and dispersion hardened polycrystalline materials. In Proc. 1st Risø Int. Symp. on Metallurgy and Materials Science: Recrystallization and Grain Growth of Multiphase and Particle Containing Materials (ed. N. Hansen, A. R. Jones & T. Leffers), pp. 57-70. Roskilde: Risø National Laboratory.
15. Driver, J. H., Juul Jensen, D. & Hansen, N. 1994 Large strain deformation structures in aluminium crystals with rolling texture orientation. Acta Metall. Mater. 42, 3105-3114.
16. Feller-Kniepmeier, M. & Wanderka, N. 1988 Shear bands in rolled Ni single crystals. In Proc. 8th Int. Conf. on Textures of Materials (ed. J. S. Kallend & G. Gottstein), pp. 517-523. Pennsylvania, PA: The Metallurgical Society.
17. Gil Sevillano, J., van Houtte, P. & Aernoudt, E. 1980 Large strain work hardening and texture. Prog. Matter. Sci. 25, 69-412.
18. Godfrey, A., Juul Jensen, D. & Hansen, N. 1998a Slip pattern, microstructure and local crystallography in an aluminium single crystal of copper orientation {112}〈111〉. Acta Metall. Mater. 46, 835-848.
19. Godfrey, A., Juul Jensen, D. & Hansen, N. 19986 Slip pattern, microstructure and local crystallography in an aluminium single crystal of copper orientation {110}〈112〉. Acta Metall. Mater. 46, 823-833.
20. Hansen, N. 1990 Cold deformed microstructures. Mater. Sci. Technol. 6, 1039-1047.
21. Hansen, N., Juul Jensen, D., Liu, Y. L. & Ralph, B. 1995 Microstructural and crystallographic aspects of recrystallization. Proc. 16th Risø Int. Symp. on Materials Science. Roskilde: Risø National Laboratory.
22. Higashida, K., Takamura, J. & Narita, N. 1986 The formation of deformation bands in FCC crystals. Mater. Sci. Engng 81, 239-258.
23. Kinkel, H., Haase, G. & Granzer, F. 1967 Electron microscope study of the formation of cubic texture during the recrystallization of copper. Acta Metall. 15, 1875-1885.
24. Hirth J. P. & Lothe, J. 1908 Theory of dislocations, pp. 643-659. New York: McGraw-Hill.
25. Honeycombe, R. W. K. 1951 X-ray and optical micrography of aluminium. J. Inst. Metals 80, 49-56.
26. Hu, H. 1963 Annealing of silicon-iron single crystals. In Recovery and recrystallization of metals (ed. L. Himmel), pp. 311-378. New York: Interscience.
27. Hughes, D. A. & Hansen, N. 1993 Microstructural evolution in nickel during rolling to large strain. Metall. Trans. A 24, 2021-2037.
28. Humphreys F. J. & Ardakani, M. G. 1994 The deformation of particle-containing aluminium single crystals. Acta Metall. Mater. 42, 749-761.
29. Humphreys, F. J. & Hatherly, M. 1995 Recrystallization and related annealing phenomena. Oxford: Pergamon.
30. Inokuti, Y. & Doherty, R. D. 1978 Transmission Kossel study of the structure of compressed iron and its recrystallization behaviour. Acta Metall. 26, 61-80.
31. Kohlhoff, G. D., Hirsh, J., Schlippenbach, U. & Lücke, K. 1981 Microstructure and recrystallization of rolled FCC-single crystals. In Proc. 6th Int. Conf. on Texture of Materials (ed. S. I. Nagashima), pp. 489-498. Tokyo: The Iron and Steel Institute of Japan.
32. Kohlhoff, G. D., Krentscher, B. & Lücke, K. 1984 Texture development in a cube-orientated copper single crystal. In Proc. 7th Int. Conf. on Texture of Materials (ed. C. M. Brakman, P. Jongenburger & E. J. Mittemeijer), pp. 95-100. Noordwijkerhout: Netherlands Society for Materials Science.
33. Krieger Lassen, N. C. & Jensen, D. J. 1994 On the statistical analysis of orientation data. Acta Crystall. A 50, 741-748.
34. Krieger Lassen, N. C., Juul Jensen, D. & Conradsen, K. 1992 Image processing procedures for analysis of electron back scattering pattern. Scanning Microsc. 6, 115-121.
35. Lee, C. S. & Duggan, B. J. 1991 A simple theory for the development of inhomogeneous rolling textures. Metall. Trans. A 22, 2637-2643.
36. Lee, C. S., Duggan, B. J. & Smallman, R. E. 1993 A theory of deformation banding in cold rolling. Acta Metall. Mater. 41, 2265-2270.
37. Liu, Q. 1995 A simple and rapid method for determining orientations and misorientations of crystalline specimen in TEM. Ultramicrosc. 60, 81-89.
38. Liu, Q. & Hansen, N. 1995a Deformation microstructure and orientation of FCC crystals. Phys. Status Solidi A149, 187-199.
39. Liu, Q. & Hansen, N. 1995b Deformation behaviour of cube-orientated crystals - single crystal and polycrystal. In Proc. 16th Risø Int. Symp. on Materials Science: Microstructure and Crystallographic Aspects of Recrystallization (ed. N. Hansen, D. Juul Jensen, Y. L. Liu & B. Ralph), pp. 447-454. Roskilde: Risø National Laboratory.
40. Liu, Q. & Hansen, N. 1996 Effect of grain orientation on the development of microtructure and microtexture of grains during plastic deformation. In Proc. 11th Int. Conf. on Textures of Materials (ed. Z. D. Liang, L. Zuo & Y. Y. Chu), pp. 1357-1363. Beijing: International Academic Publishers.
41. Malin, A. S. & Hatherly, M. 1979 Microstructure of cold-rolled copper. Metal Sci. 13, 463-472.
42. Malin, A. S., Huber, J. & Hatherly, M. 1981 The microstructure of rolled copper single crystals. Z. Metall. 72, 310-317.
43. Morii, K. & Nakayama, Y. 1985 Shear bands and microstructure of Al single crystals during rolling. Scripta Metall. 19, 185-188.
44. Morii, K. & Nakayama, Y. 1988 Shear bands and textures in rolled Al-Cu precipitation alloys. In Proc. 8th Int. Conf. on Textures of Materials (ed. J. S. Kallend & G. Gottstein), pp. 525-530. Pennsylvania, PA: The Metallurgical Society.
45. Morii, K., Mecking, H. & Nakayama, Y. 1985 Development of shear bands in FCC single crystals. Acta Metall. 33, 379-386.
46. Nakayama, Y. & Morii, K. 1982 Transmission electron microscopy of shear band formation in rolled copper single crystals. Trans. Jap. Inst. Metals 23, 422-431.
47. Ridha, A. A. & Hutchinson, W. B. 1982 Recrystallization mechanisms and the origin of cube texture in copper. Acta Metall. 30, 1929-1939.
48. Tucker, G. E. G. 1954 Discussion on preferred orientation in rolled uranium sheet. J. Inst. Met. 82, 655-656.
49. Vandermeer, R. A. & McHargue, C. J. 1964 The nature of the 〈001〉 fiber-texture component in extruded aluminium rods. Trans. Metall. Soc. AIME 230, 667-675.
50. Verbraak, C. A. 1958 The formation of cube recrystallization textures by (112) slip. Acta Metall. 6, 580-597.
51. Wagner, P., Engler, O. & Lücke, K. 1995 Formation of Cu-type shear bands and their influence on deformation and texture of rolled FCC {112}〈111〉 single crystals. Acta Metall. Mater. 43, 3799-3812.
52. Walter, J. L. & Koch, E. F. 1963 Substructures and recrystallization of deformed (100)[001]-orientated crystals of high-purity silicon-iron. Acta Metall. 11, 923-938.
53. Wert, J. A., Liu, Q. & Hansen, N. 1995 Dislocation boundaries and active slip systems. Acta Metall. Mater. 43, 4153-4163.
54. Wert, J. A., Liu, Q. & Hansen, N. 1997 Dislocation boundary formation in a cold-rolled cube-orientated Al single crystal. Acta Metall. Mater. 45, 2565-2576.
55. Wrobel, M., Dymek, S., Blicharski, M. & Gorczyca, S. 1988 Microstructure and texture of rolled (110)[001] copper single crystals. Texture Microstruct. 10, 9-19.
56. Wrobel, M., Dymak, S., Blicharski, M. & Gorczyca, S. 1994 Dislocation microstructure and texture development in rolled copper single crystals. Z. Metall. 85, 415-425.
57. Zasimchuk, Z. Z. & Markashova, L. I. 1990 Microbands in rolling-deformed nickel single crystals. Mater. Sci. Engng A127, 33-39.