Laser surface modification of Ti-6Al-4V: Wear and corrosion characterization in simulated biofluid

Journal of Biomaterials Applications

Volumn 21, Issue 1, 2006, Pages 49-73

  Singh, Raghuvir ^a   Kurella, A ^a   Dahotre, Narendra B ^a,b  

^a University of Tennessee Knoxville   (United States)

^b OAK RIDGE NATIONAL LABORATORY   (United States)

Author keywords

Anodic polarization; Corrosion; Laser surface treatment; Microstructure; Ringer's solution; Ti 6Al 4V; Wear corrosion

Indexed keywords

ANODIC POLARIZATION; CHARACTERIZATION; CORROSION; LASER APPLICATIONS; METALLOGRAPHIC MICROSTRUCTURE; SURFACE TREATMENT; WEAR OF MATERIALS; WEAR RESISTANCE;

LASER SURFACE MELTING; LASER SURFACE MODIFICATION; RINGER'S SOLUTION; SIMULATED BIOFLUID;

TITANIUM ALLOYS;

BIOMATERIAL; BIOMIMETIC MATERIAL; TITANIUM; TITANIUM ALLOY (TIAL6V4);

ARTICLE; BODY FLUID; CHEMISTRY; CORROSION; LASER; MATERIALS TESTING; RADIATION EXPOSURE; SURFACE PROPERTY;

BIOCOMPATIBLE MATERIALS; BIOMIMETIC MATERIALS; BODY FLUIDS; CORROSION; LASERS; MATERIALS TESTING; SURFACE PROPERTIES; TITANIUM;

EID: 33746403800     PISSN: 08853282     EISSN: 15308022     Source Type: Journal    
DOI: 10.1177/0885328206055998     Document Type: Article

References (38)

1. Dong, H. and Bell, T. (1999). Tribological Behavior of Alumina Sliding against Ti-6Al-4V in Unlubricated Contact, Wear, 225-229 (2): 874-884.
2. Guleryuz, H. and Cimenoglu, H. (2004). Effect of Thermal Oxidation on Corrosion and Corrosion Wear Behavior of a Ti-6Al-4V Alloy, Biomaterials, 25 (16): 3325-3333.
3. Met, C., Vandenbulcke, L. and Catherrine, M.C.S. (2003). Friction and Wear Characteristics of Various Prosthetic Materials Sliding against Smooth Diamond-coated Titanium Alloy, Wear, 255 (7-12): 1022-1029.
4. Hanawa, T. (1999). In vivo Metallic Biomaterials and Surface Modification, Mater. Sci. & Eng., A267 (2): A260-A266.
5. Silva, R.A., Barbosa, M.A., Vilar, R., Conde, O., Cunha, M. and Sutherland, I. (1994). Electrochemical Studies of Laser-treated Co-Cr-Mo Alloy in a Simulated Physiological Solution, J. Mater. Sci. Mater. Med., 5 (4): 353-356.
6. Badekas, H., Panagopoulos, C. and Ecomnomou, S. (1994). Laser Surface-treatment of Titanium, J. Mater. Process. Technol., 44 (1-2): 54-60.
7. Weerasinghe, V.M., West, D.R.F. and Damborenea, J.D. (1996). Laser Surface Nitriding of Titanium and a Titanium Alloy, J. Mater. Process. Technol., 58 (1): 79-86.
8. Gracia, I. and Damborenea, J.D. (1998). Corrosion Properties of TiN Prepared by Laser Gas Alloying of Ti and Ti6Al4V, Corros. Sci., 40 (8): 1411-1419.
9. Yue, T.M., Cheung, T.M. and Man, H.C. (2000). The Effects of Laser Surface Treatment on the Corrosion Properties of Ti-6Al-4V Alloy in Hank's Solution, J. Mater. Sci. Lett., 19 (3): 205-208.
10. Yue, T.M., Yu, J.K., Mei, Z. and Man, H.C. (2002). Excimer Laser Surface Treatment of Ti-6Al-4V Alloy for Corrosion Resistance Enhancement, Mater. Lett., 52 (3): 206-212.
11. Sun, Z., Annergren, I., Pan, D. and Mai, T.A. (2003). Effects of Laser Surface Remelting on the Corrosion Behavior of Commercially Pure Titanium Sheet, Mater. Sci. Eng., A345 (1-2): 293-300.
12. Jiang, P., He, X.L., Li, X.X., Yu, L.G. and Wang, H.M. (2000). Wear Resistance of a Laser Surface Alloyed Ti6Al4V Alloy, Surf. Coat. Technol., 130 (1): 24-28.
13. Ruff, A.W. (1998). Wear Measurements, In: Henry, S.D. (ed.), ASM Handbook on Friction, Vol. 18, pp. 362-369, Lubrication and Wear Technology, Materials Park, Ohio, USA.
14. Boyer, R.R. (1995). Titanium and Titanium Alloys, In: Davis, J.R. (ed.), ASM Handbook on Metallography and Microstructure, Vol. 9, pp. 458-475.
15. 2 Laser) Melting and Alloying of Steel with Chromium, Michigan State University, East Lansing, Michigan, USA, pp. 83-86.
16. Xie, J. and Kar, A. (1999). Laser Welding of Thin Sheet Steel with Surface Oxidation, Welding Research Supplement, 343S-348S.
17. Wakade, C.G., Dahotre, N.B. and Mukherjee, K. (1984). Damage in Aluminum, Zinc and Tin from a Nanosecond Electric Pulse Discharge, Mater. Sci. & Eng., 64: 247-254.
18. Hirth, J.P. (1972). The Influence of Grain Boundaries on Mechanical Properties, Metall. Trans., 3 (10): 3047-3067.
19. Gray, G.T., Rong, Shuh C. and Vecchio, S.K. (1972). Influence of Grain Size on the Constitutive Response and Substructure Evolution of MONEL 400, Metall. Trans., 3A (4): 1235-1247.
20. Singh, R., Martin, M. and Dahotre, N.B. (2005). Influence of Laser Surface Modification on Corrosion Behavior of Stainless Steel 316L and Ti6Al4V Alloy in Simulated Body Fluid, Surf. Eng., 21: 297-306.
21. Schmidt, H., Stechemesser, G., Witte, J. and Soltani-Farshi, M. (1998). Depth Distributions and Anodic Polarization Behavior of Ion Implanted Ti-6Al-4V, Corros. Sci., 40 (9): 1533-1545.
22. Metiko, M., Hukovic, S., Kwokal, A. and Piljac, J. (2003). The Influence of Niobium and Vanadium on Passivity of Titanium-based Implants in Physiological Solution, Biomaterials, 24 (21): 3765-3775.
23. Kolman, D.G. and Scully, J.R. (1994). The Passivity and Electrochemistry of a Ti-15V-3Cr-3Al Titanium Alloy in Ambient Temperature Aqueous Sodium Chloride Solutions, J. Electrochem. Soc., 141 (10): 2633-2641.
24. John, H.A., Hofmann, S. and Muknz, W.-D. (1987). Surface and Interface Characterization of Heat-Treated (Ti, Al)N Coatings on High Speed Steel Substrates, Thin Solid Films, 153 (1-3): 45-53.
25. Goldberg, J.R. and Gilbert, J.L. (2004). The Electrochemical and Mechanical Behavior of Passivated and TiN/AlN-coated Co-Cr-Mo and Ti-6Al-4V Alloys, Biomaterials, 25 (5): 851-864.
26. Fontana, M.G. (1987). Corrosion Engineering, pp. 505-519, McGraw-Hill Co., Singapore.
27. Parvathavarthini, N., Dayal, R.K., Sivakumar, R., Mudali, Kamachi U. and Bharati, A. (1992). Pitting Corrosion Resistance of Laser Surface Alloyed 304 Stainless Steel, Mater. Sci. Tech., 8 (7): 1070-1074.
28. Abkowitz, S., Burke, J.J. and Hiltz, Jr., R.H. (1955). Titanium in Industry, p. 56, D. Van Nostrand Co., New York.
29. Cooper, K.P. (1998). Laser Surface Processing, In: Henry, S.D. (ed.), Friction, Lubrication and Wear Technology, ASM Handbook, Vol. 18, p. 862, Materials Park, Ohio, USA.
30. Elder, J.E., Thamburaj, R. and Patnaik, P.C. (1989). Optimizing Ion Implantation Conditions for Improving Wear, Fatigue, and Fretting Fatigue of Ti6Al4V, Surface Eng., 5 (1): 55-78.
31. Bloyce, A., Morton, P.H. and Bell, T. (1994). Surface Engineering of Titanium and Titanium Alloys, In: ASM Handbook on Surface Engineering, Vol. 5, pp. 835-851, Materials Park, Ohio, USA.
32. Kim, K.Y., Bhattacharyya, S. and Agarwal, V. (1981). An Electrochemical Polarization Technique for Evaluation of Wear-corrosion in Moving Components under Stress, In: Ludema, I.C.C. (ed.), Wear of Materials, pp. 772-778, San Francisco, CA, ASME, New York.
33. Landolt, D., Mischler, S., Stemp, M. and Barril, S. (2004). Third Body Effects and Material Fluxes in Tribocorrosion Systems Involving a Sliding Contact, Wear, 256 (5): 517-524.
34. Tritschler, B., Forest, B. and Rieu, J. (1999). Fretting Corrosion of Materials for Orthopaedic Implants: A Study of a Metal/Polymer Contact in an Artificial Physiological Medium, Tribol. Int., 32 (10): 587-596.
35. Stack, M.M. and Chi, K. (2003). Mapping Sliding Wear of Steels in Aqueous Conditions, Wear, 255 (1-6): 456-465.
36. Kustas, F.M. and Mishra, M.S. (1998). Friction and Wear of Titanium Alloys, In: Henry, S.D. (ed.), Friction, Lubrication and Wear Technology, ASM Handbook, Vol. 18, p. 778, Materials Park, Ohio, USA.
37. Fedrizzi, L., Rossi, S., Bellei, F. and Deflorian, F. (2002). Wear-corrosion Mechanism of Hard Chromium Coatings, Wear, 253 (11-12): 1173-1181.
38. Konca, E., Cheng, Y.-T., Weiner, A.M., Dasch, J.M., Erdemir, A. and Alpas, A.T. (2005). Transfer of 319 Al Alloy to Titanium Diboride and Titanium Nitride based (TiAlN, TiCN, TiN) Coatings: Effects of Sliding Speed, Temperature and Environment, Surf. & Coat. Tech., 200: 2260-2270.