Numerical analysis on blast furnace performance with novel feed material by multi-dimensional simulator based on multi-fluid theory

Applied Mathematical Modelling

Volumn 30, Issue 11, 2006, Pages 1212-1228

  Nogami, Hiroshi ^a   Chu, Mansheng ^a   Yagi, Jun ichiro ^a  

^a TOHOKU UNIVERSITY   (Japan)

Author keywords

Blast furnace; Carbon composite agglomerates; Mathematical model; Simulation

Indexed keywords

AGGLOMERATION; CALCULATIONS; COMPUTER SIMULATION; HEAT TRANSFER; MATHEMATICAL MODELS; NUMERICAL ANALYSIS; REACTION KINETICS; TEMPERATURE; THERMOANALYSIS;

CARBON COMPOSITE AGGLOMERATES; FEED MATERIAL; MULTI-DIMENSIONAL SIMULATOR; MULTI-FLUID THEORY;

BLAST FURNACES;

AGGLOMERATION; BLAST FURNACES; CALCULATIONS; COMPUTER SIMULATION; HEAT TRANSFER; MATHEMATICAL MODELS; NUMERICAL ANALYSIS; REACTION KINETICS; TEMPERATURE; THERMOANALYSIS;

EID: 33746351343     PISSN: 0307904X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.apm.2006.03.013     Document Type: Article

References (40)

1. Kadoguchi K., et al. Higher pulverized coal injection rate operation at the large scale blast furnace. R&D (Kobe Steel, Ltd) 46 (1996) 2-5
2. Maki A., et al. High rate coal injection of 218 kg/t at Fukuyama no. 4 blast furnace. ISIJ Int. 36 (1996) 650-657
3. Sato M., et al. Development of injection lance with high combustibility for high rate coal injection. Tetsu to Hagané 84 (1998) 37-42
4. Hatano M., and Kurita K. A mathematical model of blast furnace considering radial distribution of gas flow, heat transfer and reactions. Tetsu to Hagané 66 (1980) 1898-1907
5. Sugiyama T., and Sugata M. Development of two-dimensional mathematical model of blast furnace "BRIGHT". Seitetsu Kenkyu 325 (1987) 34-43
6. Takatani K., Inada T., and Ujisawa Y. 3-Dimensional dynamic mathematical simulator of blast furnace. Curr. Adv. Mater. Process. 7 (1994) 50-53
7. Austin P.R., Nogami H., and Yagi J. A mathematical model of four phase motion and heat transfer in the blast furnace. ISIJ Int. 37 (1997) 458-467
8. Austin P.R., Nogami H., and Yagi J. A mathematical model for blast furnace reaction analysis based on the four fluid model. ISIJ Int. 37 (1997) 748-755
9. Chen J., Akiyama T., Nogami H., Yagi J., and Takahashi H. Modeling of solid flow in moving beds. ISIJ Int. 33 (1993) 664-671
10. Ergun S. Fluid flow through packed column. Chem. Eng. Progr. 48 (1952) 89-94
11. Richardson J.F., and Zaki W.N. Sedimentation and fluidisation: part I. Trans. Inst. Chem. Eng. 32 (1954) 35-53
12. Haider A., and Levenspiel O. Drag coefficient and terminal velocity of spherical and nonspherical particles. Powder Technol. 58 (1989) 63-70
13. Sugiyama T., et al. Analysis of liquid flow in the dripping zone of blast furnace. Tetsu to Hagané 73 (1987) 2044-2051
14. Shibata K., et al. One-dimensional flow characteristics of gas-powder two phase flow in packed beds. Tetsu to Hagané 77 (1991) 236-243
15. Shibata K., et al. Two-dimensional analysis on the flow characteristics of powders around cohesive zone in a blast furnace. Tetsu to Hagané 77 (1991) 1267-1273
16. Chen J., Akiyama T., Nogami H., and Yagi J. Behavior of powders in a packed bed with lateral inlets. ISIJ Int. 34 (1994) 133-139
17. Ranz W.E., and Marshall R.W. Evaporation from drops. Chem. Eng. Progr. 48 (1952) 141-146 173
18. Akiyama T., Takahashi R., and Yagi J. Measurements of heat transfer coefficients between gas and particles for a single sphere and for moving beds. ISIJ Int. 33 (1993) 703-710
19. Mackey P.J., and Warner N.A. Heat transfer between dispersed liquid metal and gases in packed beds. Metall. Trans. 3 (1972) 1807-1816
20. Eckert E.R.G., and Drake R.M. Heat and Mass Transfer. second ed. (1959), McGraw-Hill, New York p. 173
21. Kuipers J.A.M., Prings W., and van Swaaji W.P.M. Numerical calculation of wall-to-bed heat-transfer coefficients in gas-fluidized beds. AIChE J. 38 (1992) 1079-1091
22. Hara Y., Tsuchiya M., and Kondo S. Intraparticle temperature of iron-oxide pellet during the reduction. Tetsu to Hagané 60 (1974) 1261-1270
23. Takahashi R., et al. Operation and simulation of pressurized shaft furnace for direct reduction. Ironmaking Proc. 43 (1984) 485-500
24. Omori Y. Blast Furnace Phenomena and Modeling (1987), Elsevier, London p. 129
25. Fun F. Rates and mechanisms of FeO reduction from slags. Metall. Trans. 1 (1970) 2537-2541
26. Nogami H., Miura T., and Furukawa T. Simulation of transport phenomena around raceway zone in the lower part of blast furnace. Tetsu to Hagané 78 (1992) 1222-1229
27. Kobayashi S., and Omori Y. The chemical reaction rate of the solution loss of coke. Tetsu to Hagané 63 (1977) 1081-1089
28. Levenspiel O. Chemical Reaction Engineering. second ed. (1972), Wiley, New York p. 362
29. 2. Tetsu to Hagané 54 (1968) 1427-1431
30. Turkdogan E.T., Kor G.J.W., and Fruehan R.J. Iron Steelmaker 7 (1980) 268
31. 2 in coke ash under operating condition in blast furnace. Tetsu to Hagané 73 (1987) 637-644
32. Inoue H., Terui T., Jeng J., Omori Y., and Ohtani M. SiO generation kinetics in the reaction of SiC with Carbon monoxide in the temperature range 1900-2000 °C. Bull. Res. Inst. Min. Dressing Metall. 43 (1987) 43-52
33. Taguchi S., Kubo H., Tsuchiya N., Ichifuji K., and Okabe K. Development of a mathematical model of silicon transfer via SiO in the blast furnace. Tetsu to Hagané 68 (1982) 2303-2310
34. Ozturk B., and Fruehan R.J. Silicon transfer in blast furnace. Process Technol. Proc. 6 (1986) 959-966
35. Zhang X., Takahashi R., and Yagi J. Reaction rates of oxidized iron-scrap briquette with pulverized coke in nitrogen atmosphere. Tetsu-to-Hagané 81 (1995) 1043
36. Ueki Y., et al. Effect of atmospheric gas composition on reduction of high density carbon composite pellet. Curr. Adv. Mater. Process. 14 (2001) 82
37. Perry R.H., and Green D. Perry's Chemical Engineers Handbook. sixth ed. (1984), McGraw-Hill, New York Tables 3-5
38. Turkdogan E.T., and Leake L.E. Thermodynamics of carbon dissolved in iron alloys. J. Iron Steel Inst. 179 (1955) 39-43
39. Patankar S.V. Numerical Heat Transfer and Fluid Flow (1980), McGraw-Hill, New York p. 30
40. Patankar S.V., and Spalding D.B. A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows. Int. J. Heat Mass Transfer 15 (1972) 1787-1806