Effect of simulated thermal cycles on the microstructure of the heat-affected zone in HSLA-80 and HSLA-100 steel plates

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 35, Issue 13, 2004, Pages 985-996

  Shome, M ^a   Gupta, O P ^b   Mohanty, O N ^b  

^a TATA STEEL LTD   (India)

^b INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

[No Author keywords available]

Indexed keywords

AUSTENITE GRAIN SIZE; COARSE-GRAINED; HEAT INPUT; HIGH-STRENGTH LOW-ALLOY STEEL; LATH MARTENSITE; MIXED MICROSTRUCTURES; NIOBIUM CARBONITRIDES; PEAK TEMPERATURES; SLOW COOLING; START TEMPERATURE; STEEL PLATES; THERMAL CYCLE; TRANSFORMATION KINETICS; WELD THERMAL SIMULATION;

CARBON NITRIDE; COOLING; CORROSION; DISSOLUTION; FERRITE; GRAIN SIZE AND SHAPE; HEAT AFFECTED ZONE; HIGH STRENGTH ALLOYS; HIGH STRENGTH STEEL; MARTENSITE; MARTENSITIC STAINLESS STEEL; MICROSTRUCTURE; NIOBIUM; NIOBIUM COMPOUNDS; STEEL METALLOGRAPHY; THERMAL CYCLING; TRANSMISSION ELECTRON MICROSCOPY; WEAR RESISTANCE;

AUSTENITE;

EID: 33746068944     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-004-1002-y     Document Type: Article

References (43)

1. O.R. Myhr and O. Grong: Acta Metall. Mater., 1990, vol. 38, pp. 449-60.
2. L.E. Svensson: Control of Microstructures and Properties in Steel Arc Welds, CRC Press, Boca Raton, FL, 1994, pp.101-06.
3. R.E. Dolby: Weld. J., 1979, vol. 58, pp. 225s-238s.
4. D. Radaj: Heat Effects of Welding, Springer-Verlag Publications, Heidelberg, 1992, pp. 100-03.
5. J.C. Ion, K.E. Easterling, and M.F. Ashby: Acta Metall., 1984, vol. 32, pp. 1949-62.
6. M.R. Krishnadev, J.T. Bowker, J.T. McGrath, V.K. Vasudevan, and K.D. Challenger: Proc. 2nd Int. Conf. on Trends in Welding Research, ASM INTERNATIONAL, Materials Park, OH, 1989, pp. 799-803.
7. M.R. Krishnadev, W.L. Zhang, and J.T. Bowker: Proc. 3rd Int. Conf. on Welding Research, ASM INTERNATIONAL, Materials Park, OH, 1992, pp. 599-603.
8. A.D. Wilson: J. Met., 1987, vol. 29, pp. 39-48.
9. S.D. Bhole and A.G. Fox: Can. Metall. Q., 1996, vol. 35, pp. 151-57.
10. R.W. Fonda, G. Spanos, and R.A. Vandermeer: Proc. 4th Int. Conf. on Trends in Welding Research, ASM INTERNATIONAL, Materials Park, OH, 1995, pp. 277-82.
11. S.W. Thompson: 40th MWSP Conf. Proc., ISS, Warrendale, PA, 1998, pp. 663-73.
12. G. Spanos, R.W. Fonda, R.A. Vandermeer, and A. Matuszeski: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 3277-93.
13. O. Grong: Metallurgical Modelling of Welding, The Institute of Materials, London, 1997, pp. 409-11.
14. C.E. Cross, O. Grong, S. Liu, and J.F. Capes: in Applied Metallography, G.F. Vander Voort, ed., Van Nostrand Reinhold, New York, NY, 1986, pp. 197-210.
15. P.L. Harrison and R.A. Farrar: Int. Mater. Rev., 1989, vol. 34, pp. 35-51.
16. A.D. Wilson, E.G. Hamburg, D.J. Colvin, S.W. Thompson, and G. Krauss: Proc. Int. Conf. on Microalloyed HSLA Steel, Microalloying'88, ASM INTERNATIONAL, Metals Park, OH, 1988, pp. 259-75.
17. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Mater. Trans. A, 1990, vol. 21A, pp. 1493-1507.
18. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1557-71.
19. N.N. Rykalin: Berechnung der Wdrmevorgdnge beim Schweissen, VEB Verlag Technik, Berlin, 1957.
20. S.W. Thompson and G. Krauss: Metall. Mater. Trans. A, 1996,vol. 27A, pp. 1573-88.
21. G.R. Speich and T.M. Scoonover: in Processing, Microstructure and Properties of HSLA Steels, A.J. DeArdo, ed., TMS, Warrendale, PA, 1988, pp. 263-86.
22. A.G. Fox, S. Mikalac, and M.G. Vassilaros: Proc. G.R. Speich Symp.,ISS, Warrendale, PA, 1992, pp. 155-61.
23. M. Mujahid, A.K. Lis, C.I. Garcia, and A.J. DeArdo: Key Eng. Mater., Trans Tech Publication, Aedermannsdorf, Switzerland, 1993, vols. 84-85, pp. 209-36.
24. M. Mujahid, A.K. Lis, C.I. Garcia, and A.J. DeArdo: J. Mater. Eng. Performance, 1998, vol. 7, pp. 247-57.
25. S.K. Dhua, D. Mukerjee, and D.S. Sarma: Metall. Mater. Trans. A, 2001, vol. 32, pp. 2259-70.
26. D. Wenpu, F. Zuabao, and Y. Lang: Mater. Characterization, 1996, vol. 37, pp. 169-75.
27. O. Grong: Metallurgical Modelling of Welding, The Institute of Materials, London, 1997, pp. 303-20.
28. K.W. Andrews: J. Iron Steel Inst., 1965, vol. 203, pp. 721-27.
29. S. Suzuki and H.K.D.H. Bhadeshia: Mater. Sci. Eng., 1994, vol. A186, pp. 157-62.
30. R.W.K. Honeycombe and H.K.D.H. Bhadesia: Steels-Microstructure and Properties, Edward Arnold, London, 1995, p. 103
31. T. Gladman and F.B. Pickering: J. Iron Steel. Inst., 1967, vol. 205,pp. 653-64.
32. L.J. Cuddy and L.C. Raley: Metall. Trans. A, 1983, vol. 14A, pp. 1989-95.
33. E.J. Palmiere, C.I. Garcia, and A.J. DeArdo: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 277-86.
34. P.A. Manohar, D.P. Dunne, T. Chandra, and C.R. Killmore: Iron Steel Inst. Jpn. Int. 1996, vol. 36, pp. 194-200.
35. M.F. Ashby and K.E. Easterling: Acta Metall., 1982, vol. 30, pp. 1969-78.
36. I. Anderson and O. Grong: Acta Metall., 1995, vol. 43, pp. 2673-88.
37. M. Shome, D.S. Sarma, O.P. Gupta, and O.N. Mohanty: Iron Steel Inst. Jpn. Int. 2003, vol. 43, pp. 1431-37.
38. T.A. Kop, P.G.W. Remijn, J. Sietsma, and S. Van der Zwaaag:Materials Science Forum, Trans Tech Publication, Aedermannsdorf,Switzerland, 1998, vols. 284-286, pp. 193-200.
39. G.I. Rees, J. Perdrix, T. Maurickx, and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 1995, vol. 194, pp. 179-86.
40. H.K.D.H. Bhadeshia: Proc. 3rd Int. Conf. on Welding Research, ASM INTERNATIONAL, Materials Park, OH, 1992, pp. 213-22.
41. P.A. Manohar, T. Chandra, and C.R. Killmore: Iron Steel Inst. Jpn. Int. 1996, vol. 36, pp. 1486-93.
42. T. Abe, K. Tsukada, and J. Kozasu: Proc. Int. Conf. on HSLA Steels'85, ASM INTERNATIONAL, Material Park, OH, 1986, pp. 103-11.
43. G. Krauss and A.R. Marder: Metall. Trans., 1971, vol. 2, pp. 2343-57.