Numerical analysis procedure for predicting temperature field in design of automotive friction clutch

International Journal of Automotive Technology

Volumn 7, Issue 1, 2006, Pages 61-68

  Lee, B ^a   Cho, C ^a  

^a Inha University   (South Korea)

Author keywords

Automotive friction clutch; CFD analysis; Finite element analysis; Flywheel; Navier Stokes equations; Pressure plate; Transient analysis

Indexed keywords

EID: 33745623950     PISSN: 12299138     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (30)

1. Arora, R. C. and Stokes, V. K. (1972). On the heat transfer between two rotating disks. Int. J. Heat Mass Transfer, 15, 2119-2132.
2. Bathe, K. J. (1996). Finite Element Procedures. Prentice-Hall, Inc. New Jersey.
3. Beretta, G. P. and Malfa, E. (2003). Flow and heat transfer in cavities between rotor and stator disks. Int. J. Heat Mass Transfer, 46, 2715-2726.
4. Adapco Group. (2003). Methodology STAR-CD Ver.3.15. CD Adapco Group. London, UK.
5. Chainky, M. (1994). MSC/NASTRAN Thermal Analysis User's Guide V 68. The Macneal-Schwendler Co. Santa Ana, CA, USA.
6. Cho, C. and Ahn, S. (1999). Periodic hot spots simulation during intermittent contact on a disc brake rotor. Proc. 32th Int. Symp. Automotive Technology & Automation 8, 2, 185-194.
7. Cho, C. and Ahn, S. (2001). Thermo-elastic analysis for chattering phenomenon of automotive disc brake. Int. J. Korean Society of Mechanical Engineers 5, 5, 569-579.
8. Choi, J., Kim, D., Lee, I., Cha, B. and Kang, M. (2002) Transient thermoelastic analysis of disk brakes using finite element method. Trans. Korean Society of Automotive Engineers 10, 5, 160-167.
9. Dow, T. A. and Burton, R. A. (1997). Thermoelastic instability of sliding contact in the absence of wear. Wear, 19, 315-328.
10. Ercole, G., Mattiazzo, G., Mauro, S., Velardocchia, M., Amisano, F. and Serra, G. (2000). Experimental methodologies to determine diaphragm spring clutch characteristics. SAE Paper No. 2000-01-1151.
11. Fukano, A. and Matsui, A. (1986). Development of discbrake design method using computer simulation of heat phenomena. SAE Paper No. 860634.
12. Grieve, D. G., Barton, D. C., Crolla, D. A. and Buckingham, J. T. (1998). Design of a lightweight automotive brake disc using finite element and Taguchi techniques. Proc. Instn. Mech. Engrs. Part D, 212, 4, 245-254.
13. Heo, J., Cho, C., Cho, H., Kim, D. and Han, K. (2002). Numerical analysis procedures for reliable design of automotive mechanical clutches. SAE Paper No. 2002-01-0762.
14. Holman, J. P. (2001). Heat Transfer. 9th Edn. McGraw-Hill. New York.
15. Jeng, D. R., DeWitt, K. J. and Lee, M. H. (1979). Forced convection over rotating bodies with non-uniform surface temperature. Int. J. Heat Mass Transfer, 22, 89-98.
16. Kang, S., Kim, C., Lee, D. and Kim, H. (2003) The thermal analysis of brake disc using the solid model and 2D coupled model. Trans. Korean Society of Automotive Engineers 11, 6, 93-100.
17. Kennedy, Jr F. E. (1981). Surface temperature in sliding systems-A finite element analysis. ASME J. Lubrication Technology, 103, 90-96.
18. Lee, C. Y., Chai, Y. S., Kwon, J. D., Nam, W. H. and Kim, T. H. (2000). Finite element analysis and optimal design of automobile clutch diaphragm spring. J. Korean Society of Mechanical Engineers 24, 6, 1616-1623.
19. Limpert, R. (1998). Brake Design and Safety. Society of Automotive Engineers, Inc.
20. Murali, M. R. (1998). Failure analysis of center plate of a clutch and brake combination using finite elements. SAE Paper No. 982799.
21. Nunney, M. J. (1998). Automotive Technology. Society of Automotive Engineers, Inc. Warrendale. PA.
22. Oehlbeck, D. L. and Erian, F. F. (1979). Heat transfer from axisymmetric sources at the surface of a rotating disk. Int. J. Heat Mass Transfer, 22, 601-610.
23. Orthwein, W. C. (1986). Clutches and Brakes. Marcell Dekker, Inc., New York. U.S.A.
24. Park, Y. C. and Park, D. S. (2000). Thermal stress analysis of brake drum by using finite element analysis. J. Korean Society of Precision Engineering 8, 3, 77-84.
25. Reymond, M. and Miller, M. (1994). MSC/NASTRAN Quick Reference Guide y 68. The Macneal-Schwendler Co.
26. Shin, K., Brennan, M. J., Joe, Y-G. and Oh, J-E. (2004). Simple models to investigate the effect of velocity dependent friction on the disc brake squeal noise. Int. J. Automotive Technology 5, 1, 61-67.
27. Sim, Y. S. and Yang, W. J. (1984). Numerical study on heat transfer in laminar flow through co-rotating parallel disks. Int. J. Heat Mass Transfer 27, 11, 1963-1970.
28. Velardocchia, M., Ercole, G., Mattiazzo, G., Mauro, S. and Amisona, F. (1999). Diaphragm spring clutch dynamic characteristic test bench. SAE Paper No. 1999-01-0737.
29. Zagrodzki, P. and Truncone, S. (2003). Generation of hot spots in a wet multidisk clutch during short-term engagement. Wear 254, 5, 474-491.
30. Zagrodzki, P. and Wagoner, P. (2002). Thermo-mechanical effects in a single-sided multidisk clutch/brake design. SAE Paper No. 2002-01-1439.