Plastic strain ratios and planar aniosotropy of AA5182/polypropylene/ AA5182 sandwich sheets

International Journal of Automotive Technology

Volumn 6, Issue 3, 2005, Pages 259-268

  Kim, K J ^a  

^a Ssangyong Motor Company   (South Korea)

Author keywords

AA5182 skin; Drawability and planar anisotropy; Plastic strain ratio; Sandwich sheet; Texture

Indexed keywords

EID: 33745606712     PISSN: 12299138     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (38)

1. Asbeck, H. O. and Mecking, H. (1978). Influence of friction and geometry of deformation on texture inhomogeneities during rolling of Cu single crystals as an example. Mater. Sci. Eng., 34, 111-119.
2. Baeck, S. M., Seok, H. K., Lee, J. C. and Oh, K. H. (2001). Texture Analysis of Aluminum Plate Produced by ECAP, 2nd LIMAT, II, 621-626.
3. Cho, S.-S., Han, B. K., Chang, H. and Kim, B. K. (2005). Effects of forming process on sealing performance of full-bead of MLS gasket: Finite element analysis approach. Int. J. Automotive Technology 6, 2, 191-196.
4. Choi, C. H. and Lee, D. N. (1995). Shear texture formation in cold rolled aluminum and its recrystallization texture. Proc. of the 16th Risø Inter. Symp. of Mater. Sci., Denmark, 289-294.
5. Choi, C. H., Kwon, J. W., Oh, K. H. and Lee, D. N. (1997). Analysis of deformation texture inhomogeneity and stability condition of shear components in f.c.c. Metals, Acta. Metall., 45, 12, 5119-5128.
6. Hasegawa, K., Fujita, T., Araki, K., Mitao, S., Osawa, K., Niikura, M. and Ohori, K. (1998). Effect of intermediate annealing on the R-value of Al-Mg alloy sheet. Mater. Sci. and Eng., A257, 204-214.
7. Holscher, M., Raabe, D. and Lucke, K. (1994). Relationship between rolling textures and shear textures in F.C.C. and B.C.C. metals. Acta Metall. Mater. 42, 3, 879-886.
8. Hu, J., Ikeda, K. and Murakami, T. (1996). Effect of single roller driving cold-rolling on texture and formability of pure aluminum sheet. J. Japan Inst. Metals 60, 11, 1130-1135.
9. Hutchinson, W. B. (1989). Recrystallization textures in iron resulting from nucleation at grain boundaries. Acta Mater. 31, 4, 1047-1056.
10. Jeong, H. T., Hong, S. H. and Lee, D. N. (1999). Variation of plastic strain ratios of brass sheet with tensile strain. Textures and Microstructures, 32, 355-367.
11. Jeong, H. T., Um, K. K., Lee, D. N. and Szpunar, J. A. (2000). Variation of shear texture with shear to effective strain ratio in rolled FCC metal sheet. THERMEC 2000, Symp. on Textures in Mater. - Int. Conf. on Proc. and Manuf. of Adv. Ma., Las Vegas, NV, USA, Nov., 4-8.
12. Kamijo, T. and Fukutomi, H. (1995). Improvement of lankford value in Al-Mg alloys by the formation of (111) recrystallization texture. Proc. of the 16th Risø Inter. Symp. of Mater. Sci., Ed. N. Hansen, D. Juul, Y. L. Kiu and B. Ralph, Denmark, 377-382.
13. Kamijo, T., Adachihara, H. and Fukutomi, H. (1993). Formation of a (001)[100] deformation structure in aluminum single crystals of an S-Orientation. Acta Mater. 41, 3, 975-985.
14. Kamijo, T., Adachihara, H., Fukutomi, H. and Aernoudt, E. (1992). Development of cube texture in aluminum single crystals of a stable orientation. Acta Mater. 40, 4, 693-698.
15. Kamijo, T., Matukawa, K. Y. and Noguchi, N. (1972). Rolling and annealing texture in the outer layer of rolled aluminum sheet. J. of Jap. Inst. Metals., 36, 669-673.
16. Kim, K. H. (1999). Textures and plastic strain ratios of asymmetrically rolled aluminum alloy sheets. Ph.D. Dissertation of Seoul National Univ., 136-150.
17. Kim, K. J. (2005). Texture evolution of AA5182 aluminum alloy rolled sheets after annealing. J. of Mater. Sci. Letter, to be Published.
18. Kim, K. J., Kim, D., Choi, S. H., Chung, K., Shin, K. S., Barlat, F., Oh, K. H. and Youn, J. R. (2003). Formability of AA5182/Polypropylene/AA5182 sandwich sheets. J. of Mater. Proc. Tech. 139, 1/3, 1-7.
19. Lee, C. S. and Duggan, B. J. (1991). A simple theory for the development of inhomogeneous rolling textures. Metall. Trans. A, 22A, 2637-2643.
20. Lee, C. S., Smallman, R. E. and Duggan, B. J. (1994). Effect of rolling geometry and surface friction on cube texture formation. Mater. Sci. and Tech., 10, 149-154.
21. Lee, D. N. (1985). Theoretical dependence of limiting drawing ratio on plastic strain ratio. Proc. of the 7th Inter. Conf. on the Strength of Metals and Alloys, Montreal, Canada, 971-976.
22. Lee, D. N. and Oh, K. H. (1985). Calculation of plastic strain ratio from the texture of cubic metal sheet. J. of Mater. Sci., 20, 3111-3118.
23. Lee, D. N., Kim, K. H., Choi, C. H. and Kang, H. G. (1997). Improvement in formability of aluminum alloy sheets for use of automobiles. Proc. Inter. Conf. on Adv. Auto. Mater., Beijing China, 67-76.
24. Lequeu, P. and Jonas, J. J. (1988). Modeling of the plastic anisotropy of textured sheet. Metall. Trans., 19A, 105-120.
25. Major, B. (1992). Texture, microstructure and stored energy inhomogeneity in cold rolled commercial purity aluminum and copper. Mater. Sci. Tech., 8, 510-515.
26. Park, J. J. (1999). Predictions of texture and plastic anisotropy developed by mechanical deformation in aluminum sheet. J. of Mater. Proc. Tech., 87, 146-153.
27. Pithan, C., Hashimoto, T., Kawazoe, M., Nagahora, J. and Higashi, K. (2000). Microstructure and texture evolution in ECAE processed A5056. Mater. Sci. Eng., A280, 62-68.
28. Reid, C. N. (1975). Deformation Geometry for Materials Scientists. Pergamon Press. 111-178.
29. Rhee, M. H., Ryu, Y. M., Kim, K. J., Shin, K. S., Kim, J. H. and Lee, K. N. (2000). Development of application technique of aluminum sandwich sheets for automotive hood. FISITA 2000, Seoul, Korea, June 12-15.
30. Saito, Y., Utsunomiya, H., Suzuki, H. and Sakai, T. (2000). Improvement in the R-value of aluminum strip by a continuous shear deformation process. Scripta Mater., 42, 1139-1144.
31. Sakai, T., Hamada, S. and Saito, Y. (2001). Improvement of the R-value in 5052 aluminum alloy sheets having through-thickness shear texture by 2-pass single-roll drive unidirectional shear rolling. Scripta Mater., 44, 2569-2573.
32. Sakai, T., Saito, Y. and Kato, K. (1987). Recrystallization and texture formation in high speed hot rolling of austenitic stainless steel. Trans. ISIJ, 27, 520-525.
33. Sakai, T., Saito, Y., Hirano, K. and Kato, K. (1988). Deformation and recrystallization behavior of low carbon steel in high speed hot rolling. Trans. ISIJ, 28, 1028-1035.
34. Sakai, T., Saito, Y., Matsuo, M. and Kawasaki, K. (1991). Inhomogeneous texture formation in high speed hot rolling of ferritic stainless steel. ISIJ Inter., 31, 86-94.
35. Shin, K. S., Kim, K. J., Choi, S. W. and Rhee, M. H. (1999). Mechanical properties of aluminum/polypropylene/aluminum sandwich sheets. Metals and Mater. 5, 6, 613-618.
36. Truszkowski, W., Krol, J. and Major, B. (1980). Inhomogeneity of rollong texture in fee metals. Metall. Trans. A, 11A, 749-758.
37. Truszkowski, W., Krol, J. and Major, B. (1982). On penetration of shear texture into the rolled aluminum and copper. Metall. Trans. A, 13A, 665-669.
38. Veenstra, E. W. (1993). Aluminum-plastic-aluminum sandwich sheet for maximum weight reduction in body panels. SAE Paper 930706, 1-10.