Properties of metals at high rates of strain

Materials Science and Technology

Volumn 22, Issue 4, 2006, Pages 453-462

  Edwards, M ^a  

^a CRANFIELD UNIVERSITY   (United Kingdom)

Author keywords

Adiabatic shear; Fragmentation, spalling; High strain rate; Twinning

Indexed keywords

BRITTLENESS; PRESSURE EFFECTS; SHOCK WAVES; SPALLING; STRAIN RATE; TWINNING;

ADIABATIC SHEAR; FRAGMENTATIONS; HIGH STRAIN RATES; SHEAR BANDING;

MATERIALS SCIENCE;

EID: 33745330430     PISSN: 02670836     EISSN: None     Source Type: Journal    
DOI: 10.1179/174328406X84102     Document Type: Conference Paper

References (86)

1. Hopkinson J: 'Original papers 2, Scientific papers', 316; 1901, Cambridge, Cambridge University Press (cited in Ref. 6, p. 237).
2. Hopkinson J: 'Original papers 2, Scientific papers', 321; 1901, Cambridge, Cambridge University Press (cited in Ref. 6, p. 237).
3. Meyers M A: 'Dynamic behavior of materials', 1st edn, 299; 1994, New York, John Wiley.
4. Mott N F: Proc. R. Soc. (London) A, 1947, 189, 300-308.
5. Hopkinson B: 'Scientific papers', 14, 423; 1910, Cambridge, Cambridge University Press (cited in Ref. 3, p. 564).
6. Rinehart J S and Pearson J: 'Behavior of metals under impulsive loads'; 1965, New York, Dover Publications.
7. Meyers M A: 'Dynamic behavior of materials', 1st edn; 1994, New York, John Wiley.
8. Johnson W G and Oilman J J: J. Appl. Phys, 1959, 30, 129-144.
9. Smallman R E: 'Modern physical metallurgy', 3rd edn, 264; 1970, London, Butterworths.
10. Zerilli F J and Armstrong R W: J. Appl. Phys., 1987, 61, 1816-1825.
11. Zerilli F J and Armstrong R W: J. Appl. Phys., 1990, 68, 1580-1591.
12. Zerilli F J and Armstrong R W: Acta Metall. Mater., 1992, 40, 1803-1808.
13. Taylor G I: Proc. R. Soc. A, 1948, 194, 289-299.
14. Bai Y and Dodd B: 'Adiabatic shear localization - occurrence, theories and applications', 5; 1992, Oxford, Pergamon Press.
15. Culver R S: 'Metallurgical effects at high strain rates', (ed. R W Rohde et al.), 519; 1973, New York, Plenum Press.
16. Timothy S P: and Hutchings I M: 'High energy rate fabrication 1984', (ed. I Berman and J W Schroeder), 31; 1984, New York, ASME.
17. Leech P W: Metall Trans., 1985, 16A, 1900-1903.
18. Stock T A C and Thompson K R L: Metall. Trans., 1970, 1, 219-224.
19. Lee S, Cho K-M, Lee C S and Choo W Y: Metall. Trans., 1993, 24A, 2217-2224.
20. Timothy S P: Acta Metall., 1987, 35, 301-306.
21. Bai Y and Dodd B: 'Adiabatic shear localization - occurrence, theories and applications'; 1992, Oxford, Pergamon Press.
22. Hines J A, Vecchio K. S and Ahzi S: Metall. Mater. Trans., 1998, 29A, 191-203.
23. Christian J W and Mahajan S: Prog. Mater. Sci., 1995, 39, 1-157.
24. Christian J W and Mahajan S: Prog. Mater. Sci., 1995, 39, 86-87.
25. Murr L E: in 'Shock waves in condensed matter', (ed. S C Schmidt and N C Holmes), 315; 1988, Amsterdam, Elsevier.
26. Foley F B and Howell S P: Trans. AIME, 1923, 68, 891-915.
27. Rinehart J S and Pearson J: 'Behavior of metals under impulsive loads', 178-184; 1965, New York, Dover.
28. Smith C S: Trans. AIME, 1958, 214, 574-589.
29. Orava R N: in 'Metallurgical effects at high strain rates', (ed. R W Rohde, B M Butcher, J R Holland and C H Karnes), 129; 1973, New York, Plenum Press.
30. Haque M M and Hasmi M S J: J. Mater. Process. Technol., 1996, 56, 119-125.
31. Rohde R W: Acta Metall., 1969, 17, 353-363.
32. Champion A R and Rohde R W: J. Appl. Phys., 1970, 41, 2213-2218.
33. Anya C C and Baker T N: Scr. Metall. Mater., 1990, 24, 1917-1922.
34. Price P B: Proc. R. Soc. (London) A, 1960, 260, 251-262.
35. Bell R L and Cahn R W: Proc. R. Soc. (London) A, 1957, 239, 494-521.
36. Hull D: Acta Metall., 1961, 9, 191-204.
37. Marcinkowski M J and Lipsitt H A: Acta Metall., 1962, 10, 95-111.
38. Dawson S, Dean R and Edwards M R: Proc. 21st Int Symp. on Ballistics, (ed. N Burman et al.), DSTO, Australia, 2004, vol. 1, 289-296.
39. Lindley T C: Acta Metall., 1965, 13, 681-689.
40. Lindley T C: Acta Metall., 1966, 14, 187-191.
41. Rohde R W, Leslie W C and Glenn R C: Metall. Trans., 1972, 3, 323-328.
42. Mahajan S: Phys. Stat. Solidi, 1969, 33, 291-299.
43. Lee W S and Lin C F: Mater. Sci. Technol., 2002, 18, 877-884.
44. Murr L E, Shih H K, Niou C-S and Zernow L: Scr. Metall., 1993, 29, 567-572.
45. Feng C, Murr L F and Niou C-S: Metall. Mater. Trans., 1996, 27A, 1773-1778.
46. Walters W P and Zukas J A: 'Fundamentals of shaped charges'; 1989, New York, Wiley.
47. Millett J C F, Bourne N K and Edwards M R: Scr. Mater., 2004, 51, 967-971.
48. Edwards M R, Bourne N K and Millett J C F: 'Shock compression of condensed matter 2001', (ed. M D Furnish et al.), vol. 1, 523-526; 2002, Melville, NY, American Institute of Physics.
49. Rosenberg Z, Luttwak G, Yesherun Y and Partom Y: J. Appl. Phys., 1983, 54, 2147-2152.
50. Millett J C F, Bourne N K, Gray III G T and Stevens G T: 'Shock compression of condensed matter 2001', (ed. M D Furnish et al.), vol. 1, 579-582; 2002, Melville, NY, American Institute of Physics.
51. Sudenkov Y: 'Shock compression of condensed matter 2001', (ed. M D Furnish et al.), vol. 1, 627-629; 2002, Melville, NY, American Institute of Physics.
52. Razorenov S V, Kanel G S, Baumung K and Bluhm H J: 'Shock compression of condensed matter 2001', (ed. M D Furnish et al.), vol. 1, 503-506; 2002, Melville, NY, American Institute of Physics.
53. Razorenov S V, Savanykh A S, Kanel G S and Skakum S K: 'Shock compression of condensed matter 2003', (ed. M D Furnish et al.), vol. 1, 491-494; 2004, Melville, NY, American Institute of Physics.
54. Kanel G S: J. Appl. Phys., 1996, 79, 8310-8317.
55. Kanel G S: J. Appl. Phys., 2001, 90, 136-143.
56. Kanel G S, Razorenov S V, Baumung K and Bluhm H: 'Shock compression of condensed matter 2001', (ed. M D Furnish et al.), vol. 1, 603-606; 2002, Melville, NY, American Institute of Physics.
57. Rosenburg Z, Partom Y and Yeshurun Y: J. Phys. D: Appl. Phys., 1982,15, 1137-1142.
58. Rivas J M, Quinones S A and Murr L E: Scr. Metall. Mater., 1995, 33, 101-107.
59. Murr L E, Trillo E A, Bujunda A A and Martinez N E: Acta Mater., 2002, 50, 121-131.
60. Quinones S A, Rivas J M and Murr L E: J. Mater. Sci. Lett., 1995, 14, 685-688.
61. Quinones S A and Murr L E: Phys. Status Solidi A, 1998, 166, 763-789.
62. Pappu S and Murr L E: Mater. Sci. Eng., 2000, A284, 148-157.
63. Sanchez J C, Murr L E and Staudhammer K P: Acta Mater., 1997, 45, 3223-3235.
64. Murr L E and Esquivel E V: J. Mater. Sci., 2004, 39, 1153-1168.
65. Lee S, Hong M-H, Noh J-W and Baek W H: Metall. Mater. Trans., 2002, 33A, 1069-1074.
66. Atroshenko S A: Unpublished work.
67. Vecchio K S and Gray III G T: Proc. DYMAT 1994, J. Phys. (France) IV, colloque C8, supplement to J. Phys. (France) III, 1994, 4, 231-236.
68. Grady D E: J. Appl. Phys., 1982, 53, 322-325.
69. Grady D E and Olson M L: Int. J. Impact Eng., 2003, 29, 293-306.
70. Grady D E and Kipp M E: Int. J. Impact Eng., 1997, 20, 293-308.
71. Weimer R J and Rogers H C: J. Appl. Phys., 1979, 50, 8025-8030.
72. Grady D E and Kipp M E: J. Appl. Phys., 1985, 58, 1210-1222.
73. Mock W and Holt W H: J. Appl. Phys., 1983, 54, 2344-2351.
74. Lineau C C: J. Franklin Inst., 1936, 221, 485-494.
75. Dean R and Edwards M R: Pract. Fail. Anal., 2002, 2, 39-44.
76. Held M: in Tactical missile warheads', (ed. J Carleone), 390-403; 1993, Washington DC, American Association of Aeronautics and Astronautics.
77. Dean R, Dressos D and Edwards M R: Proc. 21st Int. Symp. on Ballistics, (ed. N Burman et al.), DSTO Australia, 2004, vol. 1, 282-288.
78. Christy S, Pak H R and Meyers M A: in 'Metallurgical applications of shock-wave and high-strain-rate phenomena', (ed. L E Murr et al.), 835-863; 1986, New York, Marcel Dekker.
79. Schwanz A J, Cazamias J U, Fiske P S and Minich R W: 'Shock compression of condensed matter 2001', (ed. M D Furnish et al.), vol. 1, 491-494; 2002, Melville, NY, American Institute of Physics).
80. Kanel G I, Rasorenov S V and Fortov V E: in 'Shock-wave and high-strain-rate phenomena in materials', (ed. M A Meyers et al.), 775-782; 1992, New York, Marcel Dekker.
81. Gray III G T, Bourne N K, Millett J C F, Lopez M F and Vecchio K S: 'Shock compression of condensed matter 2001', (ed. M D Furnish et al.), vol. 1. 479-482; 2002. Melville, NY, American Institute of Physics.
82. Thissell W R, Zurek A K, Macdougall DAS, Miller D, Everett R, Geltmacher A,Brooks R and Tonks D: 'Shock compression of condensed matter 2001', (ed. M D Furnish et al.), vol. 1, 475-478: 2002, Melville, NY, American Institute of Physics.
83. Thissell W R, Tonks D L, Schwartz D S and House J: 'Shock compression of condensed matter 2003', (ed. M D Furnish et al.), vol. 1, 495-498; 2004. Melville, NY, American Institute of Physics.
84. Voltz C and Roy G: 'Shock compression of condensed matter 2003', (ed. M D Furnish et al.), vol. 1, 511-514; 2004, Melville, NY, American Institute of Physics.
85. Meshcheryakov Y I and Divakov A K: 'Shock compression of condensed matter 2003', (ed. M D Furnish et al.), vol. 1, 487-490; 2004, Melville, NY, American Institute of Physics.
86. Gray III G T, Bourne N K, Millett J C F and Lopez M F:'Shock compression of condensed matter 2003', (ed. M D Furnish et al.), vol. 1, 461-464; 2004, Melville, NY, American Institute of Physics.