Effect of intermediate heat treatment on microstructure and texture evolution of continuous cast Al-Mn-Mg alloy sheet

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 37, Issue 6, 2006, Pages 1887-1898

  Liu, Jiantao ^a   Banovic, S W ^b   Fields, R J ^b   Morris, J G ^c  

^a ALCOA TECHNICAL CENTER   (United States)

^b NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

^c UNIVERSITY OF KENTUCKY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COLD ROLLING; CRYSTAL MICROSTRUCTURE; CRYSTALLOGRAPHY; DEFORMATION; HEAT TREATMENT; METALLOGRAPHIC MICROSTRUCTURE; SHEET METAL; TEXTURES; THERMAL EFFECTS;

ALUMINUM ALLOY SHEET; CAST ALLOY; CRYSTALLOGRAPHIC TEXTURE; DEFORMATION TEXTURES;

ALUMINUM ALLOYS;

EID: 33745319065     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-006-0131-x     Document Type: Article

References (46)

1. G.E.G. Tucker: Acta Metall., 1961, vol. 9, pp. 275-86.
2. H. Inagaki: Z. Metallk., 1991, vol. 82, pp. 361-72.
3. O. Daaland and E. Nes: Acta Mater., 1996, vol. 44, pp. 1389-411.
4. O. Engler and S. Kalz: Mater. Sci. Eng., A, 2004, vol. A373, pp. 350-62.
5. S.E. Naess: in Aluminum Alloys for Packaging, J.G. Morris, H.D. Merchant, E.J. Westerman, & P.L. Morris, eds., TMS, Warrendale, PA, 1993, pp. 275-98.
6. J. Liu: Ph.D. Thesis, University of Kentucky, Lexington, KY, 2003.
7. J. Liu and J.G. Morris: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2029-32.
8. "Metals Test Methods and Analytical Procedures:" in Annual Book of ASTM Standards, 2001, ASTM International, West Conshohocken, PA, pp. 447-50.
9. L.G. Schulz: J. Appl. Phys., 1949, vol. 20, pp. 1033-36.
10. H.J. Bunge: Texture Analysis in Material Science, Butterworths, London, 1982, pp. 1-41.
11. S. Matthies and G.W. Vinel: Phys. Stat. Sol. (b), 1982, vol. 112, pp. K111-K114.
12. S. Matthies and G.W. Vinel: Phys. Stat. Sol. (b), 1982, vol. 112, pp. K115-K120.
13. J.S. Kallend, U.F. Kocks, A.D. Rollett, and H.-R. Wenk: Mater. Sci. Eng., 1991, vol. A132, pp. 1-11.
14. P.L. Morris and B.J. Duggan: Metall. Sci., 1978, vol. 12, pp. 1-7.
15. P. Furrer and G. Hausch: Metall. Sci., 1979, vol. 13, pp. 155-62.
16. N. Hansen and B. Bay: Acta Metall., 1981, vol. 29, pp. 589-99.
17. D.J. Lloyd: Metall. Sci., 1982, vol. 16, pp. 304-08.
18. S. Saimoto and R.G. Kamat: Mater. Sci. Technol., 1992, vol. 8, pp. 869-74.
19. J.E. Hatch: Aluminum: Properties and Physical Metallurgy, American Society of Metals, Metals Park, OH, 1984, pp. 204-06.
20. Z. Li, C. Li, and J.G. Morris: in Aluminum Alloys for Packaging, J.G. Morris, H.D. Merchant, E.J. Westerman, and P.L. Morris, eds., TMS, Warrendale, PA, 1993, pp. 299-307.
21. S. Ding, X. Fan, and J.G. Morris: in Aluminum Alloys for Packaging, J.G. Morris, H.D. Merchant, E.J. Westerman, and P.L Morris, eds., TMS, Warrendale, PA, 1993, pp. 237-50.
22. Y.L. Liu, Y. Liu, G. Liao, and J.G. Morris: Aluminum Trans., 2000, vol. 2, pp. 97-106.
23. O. Daaland and E. Nes: Acta Mater., 1996, vol. 44, pp. 1413-35.
24. H.E. Vatne, O. Engler, and E. Nes: Mater. Sci. Technol., 1997, vol. 13, pp. 93-102.
25. M. Somerday and F.J. Humphreys: Mater Sci. Technol., 2003, vol. 19, pp. 20-29.
26. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219-74.
27. S. Benum and E. Nes: Acta Mater., 1997, vol. 45, pp. 4593-602.
28. R.D. Doherty and J.W. Martin: J. Inst. Metals, 1962, vol. 91, pp. 332-38.
29. E. Nes and J.D. Embury: Z. Metallk., 1975, vol. 66, pp. 589-93.
30. R.G. Kamat: J. Metall., 1996, vol. 48, pp. 34-38.
31. T.N. Rouns: in Aluminum Alloys for Packaging III, S.K. Das, ed., TMS, Warrendale, PA, 1998, pp. 3-20.
32. E. Nes, N. Ryum, and O. Hunderi: Acta Metall., 1985, vol. 33, pp. 11-22.
33. F.J. Humphreys: Acta Metall., 1977, vol. 25, pp. 1323-44.
34. O. Engler, H.E. Vatne, and E. Nes: Mater. Sci. Eng., 1996, vol. A205, pp. 187-98.
35. O. Engler, J. Hirsch, and K. Lücke: Acta Metall. Mater., 1995, vol. 43, pp. 121-38.
36. H.E. Vatne, O. Engler, and E. Nes: Mater. Sci. Technol., 1995, vol. 13, pp. 93-102.
37. O. Engler, P. Yang, and X.W. Kong: Acta Mater., 1996, vol. 44, pp. 3349-69.
38. K. Sjølstad, O. Engler, S. Tangen, K. Marthinsen, and E. Nes: Mater. Sci. Forum, 2002, vol. 396-402, pp. 463-68.
39. K. Sjølstad, O. Engler, S. Tangen, K. Marthinsen, and E. Nes: Mater. Sci. Forum, 2002, vol. 408-412, pp. 1471-76.
40. K. Lücke and O. Engler. Mater. Sci Technol., 1990, vol. 6, pp. 1113-30.
41. O. Engler: Mater. Sci. Technol., 1996, vol. 12, pp. 859-72.
42. W.G. Burgers and P.C. Louwerse: Z. Phys., 1931, vol. 67, pp. 605-78.
43. C.S. Barett: Trans. AIME Metall. Engineering, 1940, vol. 137, pp. 128-49.
44. J. Hjelen, R. Ørsund, and E. Nes: Acta Metall. Mater., 1991, vol. 39, pp. 1377-404.
45. R.D. Doherty: Acta Metall. Mater., 1993, vol. 41, pp. 3029-53.
46. J. Hirsch and K. Lücke: Acta Metall., 1985, vol. 33, pp. 1927-38.