Thermal stress development due to laser step input pulse heating

Journal of Thermal Stresses

Volumn 29, Issue 8, 2006, Pages 721-751

  Yilbas, B S ^a   Ageeli, N ^a  

^a KING FAHD UNIVERSITY OF PETROLEUM AND MINERALS   (Saudi Arabia)

Author keywords

Heating; Laser; Step input pulse; Thermal stress

Indexed keywords

COMPRESSIVE STRESS; HEAT CONDUCTION; LASER PULSES; THERMAL EFFECTS;

HEAT CONDUCTION EQUATIONS; SOLID HEATING; STEP INPUT PULSE; SURFACE VICINITY DROPS;

THERMAL STRESS;

EID: 33745259917     PISSN: 01495739     EISSN: 1521074X     Source Type: Journal    
DOI: 10.1080/01495730600705349     Document Type: Article

References (28)

1. V. P. Veiko, G. A. Kotov, G. D. Shandybina, and E. B. Yakovlev, Thermal Stress in a Film-Substrate Structure Exposed to Pulse Laser Heating, Soviet J. Quantum Electronics, vol. 11, no. 10, pp. 1338-1340, 1981.
2. A. Galka and R. Wojnar, One-Dimensional Dynamic Thermal Stress Generated in an Elastic Half-Space by Laser Pulses, J. Thermal Stresses, vol. 18, no. 2, pp. 113-140, 1995.
3. H. G. Wang, Y. H. Guan, T. L. Chen, and J. T. Zhang, Study of Thermal Stresses During Laser Quenching, J. Material Processing Technology, vol. 63, no. 1-3, pp. 550-553, 1997.
4. C. W. Lee, M. K. Ko, S. Lok, H. W. Oh, and Gho, Comparison of the Stress Between Rapid Thermal Annealed and Excimer Laser Annealed Polycrystalline Silicon Thin Films, Solid State Communications, vol. 105, no. 12, pp. 777-781, 1998.
5. M. F. Modest, Transient Elastic and Viscoelastic Thermal Stresses during Laser Drilling of Ceramics, ASME J. Heat Transfer, vol. 120, no. 4, pp. 892-898, 1998.
6. D. Zhu and R. A. Miller, Determination of Creep Behavior of Thermal Barrier Coatings Under Laser Imposed High Thermal and Stress Gradient Conditions, J. Materials Research, vol. 14, no. 1, pp. 146-161, 1999.
7. K. Dai and L. Shaw, Thermal and Stress Modeling of Multi-Material Laser Processing, Acta Materialia, vol. 49, no. 20, pp. 4171-4181, 2001.
8. T. Elperin and G. Rudin, Thermal Stresses in Functionally Graded Materials Caused by a Laser Thermal Shock, Heat and Mass Transfer, vol. 38, no. 7-8, pp. 625-630, 2002.
9. R. Akarapu, B. Q. Li, and A. E. Segall, A 3-D Numerical Model for Ablation Phenomena and Thermal Stress Evolution During Laser Machining, Proceedings of ASME Summer Heat Transfer Conference, vol. 2003, pp. 189-198, 2003.
10. A. K. Ibraheem, B. Derby, and P. J. Withers, Thermal and Residual Stress Modeling of the Selective Laser Sintering Process, Proceedings of Materials Research Society Symposium, vol. 758, pp. 47-52, 2003.
11. P. Klemm, K. Rozniakowski, and A. Evtushenko, Laser-Induced Temperature Field and Thermal Stresses in the Elastic Homogeneous Material, Material Science, vol. 39, no. 3, pp. 385-393, 2003.
12. G. F. Yuan, C. S. Ge, and X. Y. Zeng, Simulation of Temperature and Thermal Stress Field in Laser Milling Processing, Acta Metallurgica Sinica, vol. 17, pp. 43-46, 2004.
13. L. W. Tsay, M. C. Young, F. Y. Chou, and R. K. Shiue, The Effect of Residual Thermal Stress on the Fatigue Crack Growth of Laser-Annealed 304 Stainless Steels, Materials Chemistry and Physics, vol. 88, pp. 348-352, 2004.
14. P. H. Tehrani, L. G. Hector, Jr., R. B. Hetnarski, and M. R. Eslami, Boundary Element Formulation for Thermal Stresses During Pulsed Laser Heating, ASME J. Applied Mechanics, vol. 68, pp. 480-489, 2001.
15. W. S. Kim, L. G. Hector, Jr., and R. B. Hetnarski, Thermoelastic Stresses in a Bounded Layer due to Repetitively Pulsed Laser Radiation, Acta Mechanica, vol. 25, pp. 107-128, 1997.
16. N. Sumi, R. B. Hetnarski, and N. Noda, Transient Thermal Stresses due to a Local Source of Heat Moving over the Surface of an Infinite Elastic Slab, J. Thermal Stresses, vol. 10, pp. 83-96, 1987.
17. B. S. Yilbas, M. Sami, and S. Z. Shuja, Laser Induced Thermal Stresses on Steel Surfaces, Optics and Lasers in Engineering, vol. 30, pp. 25-37, 1998.
18. M. Kalyon and B. S. Yilbas, Analytical Solution for Thermal Stresses during Laser Pulse Heating Process, Proc Instn Mech Engrs, Part C, J. Mechanical Engineering Science, vol. 215, pp. 1429-1445, 2001.
19. B. S. Yilbas and N. Al-Ageeli, Formulation of Laser Induced Thermal Stresses: Stress Boundary at the Surface, Proc. Instn. Mech. Engrs. Part C: J. Mechanical Engineering Science, vol. 217, pp. 423-434, 2003.
20. B. S. Yilbas and N. Al-Ageeli, Thermal Stresses due to Time Exponentially Decaying Laser Pulse: Elasto-Plastic Wave Propagation, Int. J. Mechanical Sciences, vol. 46, pp. 57-80, 2004.
21. B. S. Yilbas, N. Ageeli, and M. Kalyon, Laser Induced Thermal Stresses in Solids: Exponentially Time Decaying Pulse Case, Lasers in Engineering, vol. 14, no. 1, pp. 81-101, 2004.
22. B. S. Yilbas and I. Z. Naqavi, Laser Heating Including Phase Change Process and Thermal Stress Generation in Relation to Drilling, Proc. Instn. Mech. Engrs. Part B: J. Engineering Manufacture, vol. 217, pp. 977-991, 2003.
23. Amada Laser, (laser type: Pulsar 2415 XL), 799 Blerman Court, Suite 120, Mt. Prospect, IL 60056, USA.
24. L. G. Hector, Jr., W. S. Kim, and M. N. Ozisik, Hyperbolic Heat Conduction Due to a Mode Locked Laser Pulse Train, Int. J. Engineering Science, vol. 30, no. 12, pp. 1731-1744, 1992.
25. B. S. Yilbas and M. Kalyon, Formulation of Laser Pulse Heating: A Closed Form Solution Including Heating and Cooling Cycles with Pulse Parameter Variation, Lasers in Engineering, vol. 14, no. 3-4, pp. 213-228, 2004.
26. A. D. Kovalenko, Thermoelasticity: Basic Theory and Applications, p. 190, Wolters-Noordhoff Publishing, Groningen, The Netherlands, 1969.
27. C. F. Bohren and D. R. Huffman, Absorption and Scattering of Light by Small Particles, p. 499, Wiley-Interscience, New York, 1998.
28. M. Abramowitz and I. A. Stegun, Handbook of Mathematical Functions, p. 1020, Dover, New York, 1965.