Structural health monitoring in the railway industry: A review

Structural Health Monitoring

Volumn 4, Issue 1, 2005, Pages 81-94

  Barke, D ^a   Chiu, K W ^a  

^a MONASH UNIVERSITY   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 33745255667     PISSN: 14759217     EISSN: 17413168     Source Type: Journal    
DOI: 10.1177/1475921705049764     Document Type: Review

References (55)

1. Steets, P.G. and Tse, Y.H. (1998). Conrail's integrated automated wayside inspection. In: Proceedings of the IEEE/ASME Joint Railroad Conference 1998, Piscataway, NJ, USA: IEEE, pp. 113-125.
2. Grassie, S.L. (1990). Allowable impact loading and wheel irregularities. In: Eighth International Rail Track Conference 1990, Sydney, Australia.
3. Lechowicz, S. and Hunt, C. Monitoring and Managing Wheel Condition and Loading: Teknis Electronics and National Rail, Respectively, -unknown-.
4. Southern, C. (ed.) (2002). Effect of impact loads on bearings. In: Systems RCPWD.
5. Tajaddini, A. (1996). Testing the effects of wheel impact loads on bridges. Railway Track and Structures, 92 (3), 17-20.
6. Stone, D.H., Lonsdale, C. and Kalay, S. (2001). Effect of wheel impact loading on shattered rims. In: 13th International Wheelset Conference 2001, Rome.
7. Kalay, S. and Hargrove, M.B. (1994). Examining the economics of high-impact wheel loads. Railway Track and Structures, 90 (3), 29-33.
8. Mutton, P.J. and Alvarez, E.F. (2002). Failure modes in aluminothermic rail welds under high axle load conditions. In: International Conference on Failure Analysis (IFCA) 2002, Melbourne.
9. Frank, N. (2003). New rail could solve rolling contact fatigue. International Railway Journal, 43 (5), 49-50.
10. Morys, B. (1999). Enlargement of out-of-round wheel profiles on high speed trains. Journal of Sound and Vibration, 227 (5), 965-978.
11. Neilsen, J.C.O. and Johansson, A. (2000). Out of round wheels - a literature survey. In: Proceedings of the Institution of Mechanical Engineers - Part F, Vol. 214, pp. 79-91.
12. Stone, D.H., Kalay, S.F. and Tajaddini, A. (1992). Statistical behaviour of wheel impact load detectors to various wheel defects. In: Tenth International Wheelset Congress, Sep 27-Oct 1 1992, Sydney, Aust., Barton, Aust.: IE Aust., pp. 9-13.
13. Johansson, A. and Nielsen, J. (2001). Railway wheel out-of-roundness - Influence of wheel-rail contact forces and track response. In: 13th International Wheelset Conference, Rome.
14. Kalay, S., Tajaddini, A. and Stone, D.H. (1992). Detecting wheel tread surface anomalies. In: Rail Transportation - 1992 American Society of Mechanical Engineers, Rail Transportation Division (Publication) RTD, ASME, New York, NY, USA, pp. 165-174.
15. Partington, W. (1993). Wheel impact load monitoring. Proceedings of the Institution of Civil Engineers - Transport, 100 (4), 243-245.
16. Bladon, K. (2003). Barke, D.W. (ed.), Function of Wayside Wheel Impact Monitors, Adelaide, Australia.
17. Ramkow-Pedersen, O. and Danneskiold-Samsøe, U. (2001). New on-line wheel tread defect monitoring system with built-in diagnosis facilities. In: 13th International Wheelset Conference, Rome, pp. 1-8.
18. Ohtani, T. (1995). Development of a wheel-flat detection system. In: 11th International Wheelset Conference, Paris, France, pp. 235-240.
19. Zhai, W.-M. (1996). Two simple fast integration methods for large-scale dynamic problems in engineering. International Journal for Numerical Methods in Engineering, 39 (24), 4199-4214.
20. Ishida, M. and Ban, T. (2001). Modelling of wheel flats for track dynamics. In: XXX Convegno Nazionale dell'Associazione Italiana per l'Analisi delle Sollecitazioni, Alghero(SS): Associazione Italiana per l0 Analisi delle Sollecitazioni.
21. Frederick, C.O. (1978). The effect of wheel and rail irregularities on the track. In: Heavy Haul Railways Conference, Perth, Western Australia: Institution of Engineers Australia, p. Session 203.
22. Wu, T.X. and Thompson, D.J. (2002). A hybrid model for the noise generation due to railway wheel flats. Journal of Sound and Vibration, 251 (1), 115-139.
23. Pocock, J.D. and Rasaiah, W.G. (2001). Wheel monitoring methodologies. In: 13th International Wheelset Conference, Rome.
24. Feng, Q., Cui, J., Zhao, Y., Pi, Y. and Teng, Y. (200). A dynamic and quantitative method for measuring wheel flats and abrasion of trains. In: 15th WCNDT World Conference on Non-Destructive Testing, Rome.
25. Haigh, S. (2003). Barke D.W. (ed.), Trakblaze Train Weighing Systems, Melbourne, Australia.
26. Beebe, R. (1995). Machine Condition Monitoring: How to Predict Maintenance Requirements for Rotating and Stationary Plant, 2nd edn, Victoria, Australia: MCM Consultants, Pty. Ltd.
27. Newman, R.R., Leedham, R.C., Tabacchi, J., Purta, D., Maderer, G.G. and Galli, R. (1990). Hot bearing detection with the 'SMART-BOLT' In: IEEE Technical Papers Presented at the Joint ASME/IEEE/AAR Railroad Conference (Association of American Railroads) 1990, Chicago, IL, USA, IEEE, IEEE Service Center, Piscataway, NJ, USA, pp. 105-110.
28. Fec, M.C. and Moyar, G.J. (1987). Railroad journal bearing failure and detection past, present and future. American Society of Mechanical Engineers (Paper) New York, NY, USA: ASME, pap 87-WA/RT-5, 14 p.
29. Smith, D.L. (1988). Wayside inspection station. In: The IEEE/ASME Joint Railroad Conference, Piscataway, NJ, USA: IEEE, pp. 85-90.
30. Bartle, P. (2003). Locomotive bearing condition update. Report No: Monash/RT/2003/098. Melbourne, Australia: Institute of Railway Technology, Monash University, February 2003.
31. Barke, D.W. and Bartle, P. (2002). Bearing condition - progress report. Report No: Monash/RT/2002/084. Melbourne, Australia: Institute of Railway Technology, Monash University; 2002.
32. Bartle, P. (2003). Locomotive bearing condition update 2. Report No: Monash/RT/2003/100. Melbourne, Australia: Institute of Railway Technology, Monash University, April 2003.
33. Greer, P. (2003). Barke, D.W. (ed.), Hot Box Detector Use at RIC, Syndey, Australia.
34. Stock, D. (2003). Barke, D.W. (ed.), Hot Box Detector Use at QR, Rockingham, Queensland.
35. Vickers, T. (2001). The use of operational information technology in a competitive railway. In: 7th International Heavy Haul Conference, 2001.
36. Kilian, K. (2003). Barke, D. (ed.), LynxRail ATex Automatic Train Examiner.
37. Blair, J. (2003). Barke, D. (ed.), MRX Technologies - Wayside Detection Systems, Perth.
38. Anderson, G.B., Stone, D.H., Cline, J.E. and Smith, R.L. (1996). New detection technique to identify defective railroad bearings. In: Rail Transportation, American Society of Mechanical Engineers, Rail Transportation Division (Publication) RTD, New York, NY, USA: ASME, pp. 31-33.
39. Anderson, G.B. and Smith, R.L. (1997). Acoustic identification of a spun cone roller bearing defect. In: Rail Transportation 1997, American Society of Mechanical Engineers, Rail Transportation Division (Publication) RTD, pp. 19-25.
40. Choe, H.C., Wan, Y. and Chan, A.K. (1997). Neural pattern identification of railroad wheel-bearing faults from audible acoustic signals: comparison of FFT, CWT, and DWT features. In: Proceedings of SPIE - The International Society for Optical Engineering 1997, Bellingham, WA, USA: Society of Photo-Optical Instrumentation Engineers, pp. 480-496.
41. Cline, J.E., Bilodeau, J.R. and Smith, R.L. (1988). Acoustic wayside identification of freight car roller bearing defects. In: Proceedings of the IEEE/ASME Joint Railroad Conference 1988, Piscataway, NJ, USA: IEEE, pp. 79-83.
42. Irani, F.D., Anderson, G.B. and Urban, C.L. (2001). Development and deployment of advanced wayside condition monitoring systems. In: International Heavy Haul Association STS-Conference, Brisbane, Australia, pp. 313-319.
43. ImageMap (2003). WheelSpec Wheel and Bogie Condition Monitor, Columbia SC USA.
44. Technogamma. Doc.: 112 UK-R1. BADOERE DI MORGANO (TV) Italy.
45. Bowey, R., Tew, G.P. and Epp, C.J. (1999). A wayside monitor of vehicle stability. In: International Heavy Haul Association STS-Conference, Moscow, Russia, pp. 339-344.
46. Izbinsky, G., D'Aoust, D., Romen, Y., Levinson, M., Zikov, Y. and Zakharov, S., et al. (1999). Problems in wayside measurement of train-track interaction. In: International Heavy Haul Association STSConference 1999, pp. 111-119.
47. Wayside_Inspection_Devices (2002). Truck/Bogie Optical Geometry Inspection Station.
48. Barrett-Lennard, I. (2003). Barke, D. (ed.), MRX Technologies - Wayside Detection Systems, Perth.
49. Matoba, K. (2000). Detection and warning systems form first line of defense. Railway Track and Structures, 96 (4).
50. Kilian, K., Mazur, V. and Kilian, M. (2001). Automated rolling stock maintenance. In: Oghanna, W. and Bock, B. (eds), Seventh International Heavy Haul Conference 2001, International Heavy Haul Association: Brisbane Australia, pp. 445-449.
51. Ward, M. (1990). Development of a semi automatic/ automatic rolling stock wheel ultrasonic testing facility. In: Mechanical Engineering Transactions - Institution of Engineers, Australia, Vol. 2, pp. 134-139.
52. Widmayer, H.R. (2001). 10 Years of experience with our high speed wheelset diagnosis for high-speed trains. In: Thirteenth International Wheelset Conference 2001, Rome.
53. Widmayer, H.R. (1992). Wheelset diagnosis for high speed traffic. In: National Conference Publication - Institution of Engineers, Australia, Barton, Aust.: IE Aust., pp. 295-302.
54. Hackenberger, D.E. and Lonsdale, C.P. (1998). Initial feasibility study to develop a wayside cracked railroad wheel detector. In: Proceedings of the IEEE/ASME Joint Railroad Conference, Philadelphia, PA, USA, Piscataway, NJ, USA: IEEE, pp. 65-77.
55. Mian, J.F. and Naumann, H.J. (1999). In rail comprehensive wheel set inspection for the 21st Century. In: International Heavy Haul Association STSConference 1999, pp. 141-147.