Review of thermal conductivity of cast iron

International Journal of Cast Metals Research

Volumn 18, Issue 6, 2005, Pages 331-345

  Holmgren, D ^a  

^a JÖNKÖPING UNIVERSITY   (Sweden)

Author keywords

Alloying elements; Compacted graphite iron; Ductile iron; Graphite morphology; Grey iron; Modelling of thermal conductivity; Thermal conductivity of microconstituents; Thermal diffusivity

Indexed keywords

EID: 33745126983     PISSN: 13640461     EISSN: None     Source Type: Journal    
DOI: 10.1179/136404605225023153     Document Type: Review

References (58)

1. M. GUSTAVSSON, J. S. GUSTAVSSON, S. I. GUSTAFSSON and L. HÄLLDAHL: High-Temp.-High Press., 2000, 32, 47-51.
2. J. BLUMM: Ceram. Ind., 2002, 152, 53-59.
3. J. M. CORSAN: Proc. 4th Seminar on 'Physical and elastic characterisation', London, UK, 1989, 89-138.
4. J. M. CORSAN, N. J. BUDD and w. F. HEMMINGER: High Temp.-High Press., 1991, 23, 119-128.
5. S. SHAO, S. DAWSON and M. LAMPIC: Conference on 'Materials for Lean Weight Vehicles', Gaydon; UK, November 1997.
6. National Physical Laboratory, www.npl.co.uk (accessed on 21 December 2004).
7. W. J. PARKER, R. J. JENKINS, C. P. BUTLER and G. L. ABBOT: J. Appl. Phys., 1961, 32, 1679-1684.
8. P. S. GAAL, M. A. THERMITUS and s. APOSTOLESCU: Proc. Sessions of TMS Annual Meeting on 'Light metals', Warrendale, PA, 2002, pp. 541-545.
9. J. A. CAPE and G. W. LEHMAN: J. Appl. Phys., 1963, 34, 1909-1913.
10. T. OKAMOTO, A. KAGAWA, K. KAMEI and H. MATSUMOTO: J. Jpn. Foundrymeńs Soc., 1983, 55, 32-36.
11. R. W. MONROE and C. E. BATES: AFS Trans., 1982, 90, 615-624.
12. K. B. PALMER: BCIRA J., 1960, 8, 266-272.
13. D. FITZGEORGE and J. A. POPE: Trans. North East Coast Inst. Eng. and Shipbuilders, 1959, 75, 99-104.
14. G. F. SERGEANT and E. R. EVANS: Br. Foundrymen, 1978, 71, 115-124.
15. H. KEMPERS: Giesserei, 1966, 53, 15-18.
16. J. ORMEROD, R. TAYLOR and R. J. EDWARDS: Met. Technol., April, 1978, 109-113.
17. P. A. GREEN and A. J. THOMAS: AFS Trans., 1983, 55, 32-36.
18. P. A. BLACKMORE and K. MORTON: Int. J. Fatigue, 1982, 4, 149-155.
19. N. SYKES, C. MUSIOL and J. M. DRAPER: SBB Conference on 'Materials, experimentation and design in fatigue', Warwick, UK. 1981.
20. R. O. GRISDALE, A. C. PFISTER and W. VAN ROOSBROECK: Bell Syst. Tech. J., 1951, 30, 271-314.
21. R. TAYLOR: Br. J. Appl. Phys., 1965, 16, 509-515.
22. Y. S. TOULOUKIAN: Thermophysical properties of matter', Vol. 2; 1970, New York, Plenum.
23. P. ZHU, R. SHA and Y. LI: The physical metallurgy of cast iron' (eds H. Fredriksson and M. Hillert), Proc. Materials Research Society, Vol. 34, 3-11; 1985, North Holland.
24. X. DEN, P. ZHU and Q. LIU: 'The physical metallurgy of cast iron' (eds H. Fredriksson and M. Hillert). Proc. Materials Research Society, 141-150; 1985, North Holland.
25. W. SHENGQING: Trans. Jpn. Foundrymen's Soc., 1994, 13, 13-17.
26. L. HECHT, R. B. DINWIDDIE and H. WANG: J. Mater. Sci., 1999, 34, 4775-4781.
27. L. HECHT, R. B. DINWIDDIE, W. D. PORTER and H. WANG! SAE technical paper 962126, SAE International, Warrendale, PA, 1996.
28. B. R. PATTERSON and C. E. BATES: Microstruct. Sci., 1983, 11, 13-28.
29. M. C. RUKADIKAR and G. P. REDDY: J. Mater. Sci., 1986, 21, 4403-4410.
30. R. K. WILLIAMS, R. S. GRAVES, F. J. WEAVER and D. W. YARBROUGH: J. Appl. Phys., 1987, 62, 2278-2783.
31. E. SÖHNCHEN: Arch. Eisenhüttenwes., 1934, 8, 223-229.
32. J. W. DONALDSON: Proc. Inst. Mech. Eng., 1928, 2, 953-983.
33. J. W. DONALDSON: Proc. Inst. Br. Foundrymen, 1938-1939, 32, 125-131.
34. J. W. DONALDSON: Foundry Trade J., 1940, 63, 141-144.
35. R. BERTODO: J. Strain Anal. Eng. Des., 1970, 5, 98-109.
36. R. B. GUNDLACH: AFS Trans., 1983, 91, 389-422.
37. Y. JIMBO, T. MIBE, K. AKIYAMA, H. MATSUI, M. YOSHIDA and A. OZAWA: SAE technical paper 900002, SAE International, Warrendale, PA, 1990.
38. H. T. ANGUS: 'Cast irons: physical and engineering properties', 2nd edn, 126-134; 1976, London, Butterworth.
39. W. D. KINGERY, J. FRANCL, R. L. COBLE and T. VASILOS: J. Am. Ceram. Soc., 1954, 37, 107-110.
40. R. K. WILLIAMS, D. W. YARBROUGH, J. W. MASEY, T. K. HOLDER and R. s. GRAVES: J. Appl. Phys., 1981, 52, 5167-5175.
41. L. FILONI and O. ROCCHINI: High Temp.-High Press., 1987, 19, 381-387.
42. K. VON LOHBERG and J. MOTZ: Giesserei, 1957, 44, 305-308.
43. K. M. BROWNE: ASME International Mechanical Engineering Congress and Exposition on 'Recent advances in heat transfer and microstructure modelling for metal processing', San Francisco, CA, November 1995, Vol. 67, 105-115.
44. H. MASUMOTO: Sci. Rep. Tohoku Uni., 1927, 16, 417-435.
45. J. HELSING and G. GRIMVALL: J. Appl. Phys., 1991, 70, 1198-1206.
46. R. W. POWELL: Research, 1954, 7, 492-501.
47. A. W. SMITH and N. S. RAZOR: Phys. Rev., 1956, 104, 885-891.
48. C. BENEDICKS, H. BÅCKSTRÖM and P. SEDERHOLM: J. Iron Steel Inst., 1926, 114, 127-172.
49. J. W. DONALDSON: J. Iron Steel Inst., 1933, 128, 255-274.
50. G. RANQUE, P. HENRY and M. CHAUSSAINI Rev. Mét., 1936, 33, 598-608.
51. W. SHENQUING and s. GUANJI: Proc. Int. Symposium on 'New development of cast iron technology', Luoyang, China, April 1988, 105-109.
52. H. BAYATI and R. ELLIOT: Mater. Manuf. Process., 1997, 12, 1-16.
53. H. BAYATI and R. ELLIOT: Mater. Sci. Tech. Ser., 1999, 15, 265-277.
54. A. L. RIMMER and R. ELLIOT: Int. J. Cast Metal Res., 1988, 7, 143-151.
55. G. GRIMVALL: Mater Sci. Forum, 1993, 123-125, 297-304.
56. J. HELSING and A. HELTE: J. Appl. Phys., 1991, 69, 3583-3588.
57. K. SCHULGASSER: J. Appl. Phys., 1983, 54, 1380-1382.
58. N. N. ALEKSANDROV, E. V. KOVALEVICH and V. P. TROSHCHANOVICH: Sov. Energy Technol., 1984, 7, 39-43.