-
2
-
-
0003877041
-
Solving elliptic problems using ellpack
-
Springer Berlin Heidelberg New York
-
RF Boisvert JR Rice 1985 Solving elliptic problems using Ellpack Springer Berlin Heidelberg New York
-
(1985)
-
-
Boisvert, R.F.1
Rice, J.R.2
-
3
-
-
0001203345
-
The hot-pressing of dry-formed wood-based composites. Part I. A review of the literature, identifying the primary physical process and the nature of their interaction
-
1:CAS:528:DyaL1MXhtFKqs78%3D
-
Bolton AJ, Humphrey PE (1988) The hot-pressing of dry-formed wood-based composites. Part I. A review of the literature, identifying the primary physical process and the nature of their interaction. Holzforschung 42:403-406 1:CAS:528:DyaL1MXhtFKqs78%3D
-
(1988)
Holzforschung
, vol.42
, pp. 403-406
-
-
Bolton, A.J.1
Humphrey, P.E.2
-
4
-
-
84942402840
-
The hot-pressing of dry-formed wood-based composites. Part III. Predicted vapour pressure and temperature variation with time, compared with experimental data for laboratory boards
-
1:CAS:528:DyaL1MXlsFKhs7k%3D
-
Bolton AJ, Humphrey PE, Kavvouras PK (1989) The hot-pressing of dry-formed wood-based composites. Part III. Predicted vapour pressure and temperature variation with time, compared with experimental data for laboratory boards. Holzforschung 43:265-274 1:CAS:528:DyaL1MXlsFKhs7k%3D
-
(1989)
Holzforschung
, vol.43
, pp. 265-274
-
-
Bolton, A.J.1
Humphrey, P.E.2
Kavvouras, P.K.3
-
5
-
-
84961479425
-
The hot-pressing of dry-formed wood-based composites. Part IV. Predicted variation of mattress moisture content with time
-
1:CAS:528:DyaK3cXjvVCmsQ%3D%3D
-
Bolton AJ, Humphrey PE, Kavvouras PK (1989) The hot-pressing of dry-formed wood-based composites. Part IV. Predicted variation of mattress moisture content with time. Holzforschung 43:345-349 1:CAS:528:DyaK3cXjvVCmsQ%3D%3D
-
(1989)
Holzforschung
, vol.43
, pp. 345-349
-
-
Bolton, A.J.1
Humphrey, P.E.2
Kavvouras, P.K.3
-
6
-
-
84942400582
-
The hot-pressing of dry-formed wood-based composites. Part VI. The importance of stresses in the pressed mattress and their relevance to the minimization of pressing time, and the variability of board properties
-
1:CAS:528:DyaK3cXnvFOlsw%3D%3D
-
Bolton AJ, Humphrey PE, Kavvouras PK (1989) The hot-pressing of dry-formed wood-based composites. Part VI. The importance of stresses in the pressed mattress and their relevance to the minimization of pressing time, and the variability of board properties. Holzforschung 43:406-410 1:CAS:528:DyaK3cXnvFOlsw%3D%3D
-
(1989)
Holzforschung
, vol.43
, pp. 406-410
-
-
Bolton, A.J.1
Humphrey, P.E.2
Kavvouras, P.K.3
-
7
-
-
0013136706
-
Heat Transfer in particleboard during hot pressing
-
PhD Dissertation, Colorado State University, Fort Collins
-
Bowen ME (1970) Heat Transfer in particleboard during hot pressing. PhD Dissertation, Colorado State University, Fort Collins
-
(1970)
-
-
Bowen, M.E.1
-
8
-
-
0011792990
-
The linear system analyzer
-
Technical Report TR-511, Computer Science Department, Indiana University, Bloomington
-
Bramley R, Gannon D, Stuckey T, Villacis J, Akman E, Balasubramanian J, Breg F, Diwan S, Govindaraju M (1998) The linear system analyzer. Technical Report TR-511, Computer Science Department, Indiana University, Bloomington
-
(1998)
-
-
Bramley, R.1
Gannon, D.2
Stuckey, T.3
Villacis, J.4
Akman, E.5
Balasubramanian, J.6
Breg, F.7
Diwan, S.8
Govindaraju, M.9
-
9
-
-
85008024133
-
Simulating the Glast satellite with Gismo
-
10.1109/5992.852387
-
Burnett T, Chaput C, Arrighi H, Norris J, Suson DJ (2000) Simulating the Glast satellite with Gismo. IEEE Comput Sci Eng 2:9-18 10.1109/ 5992.852387
-
(2000)
IEEE Comput Sci Eng
, vol.2
, pp. 9-18
-
-
Burnett, T.1
Chaput, C.2
Arrighi, H.3
Norris, J.4
Suson, D.J.5
-
10
-
-
0032299117
-
Modeling and simulation of the hot-pressing process in the production of medium density fiberboard (MDF)
-
1:CAS:528:DyaK1MXmsFGmtA%3D%3D
-
Carvalho LMH, Costa LMH (1998) Modeling and simulation of the hot-pressing process in the production of medium density fiberboard (MDF). Chem Eng Comm 170:1-21 1:CAS:528:DyaK1MXmsFGmtA%3D%3D
-
(1998)
Chem Eng Comm
, vol.170
, pp. 1-21
-
-
Carvalho, L.M.H.1
Costa, L.M.H.2
-
11
-
-
1142267241
-
Integrating physics-based computing and visualization: Modeling dust behavior
-
Chen JX, Fu X (1999) Integrating physics-based computing and visualization: Modeling dust behavior. IEEE Comput Sci Eng 1:12-16
-
(1999)
IEEE Comput Sci Eng
, vol.1
, pp. 12-16
-
-
Chen, J.X.1
Fu, X.2
-
12
-
-
0000787249
-
Spatial structure of wood composites in relation to processing and performance characteristics. Part III. Modeling the formation of multi-layered random flake mats
-
Dai C, Steiner PR (1994) Spatial structure of wood composites in relation to processing and performance characteristics. Part III. Modeling the formation of multi-layered random flake mats. Wood Sci Technol 28:229-239
-
(1994)
Wood Sci Technol
, vol.28
, pp. 229-239
-
-
Dai, C.1
Steiner, P.R.2
-
13
-
-
0028447117
-
Computer as thinker/doer: Problem-solving environments for computational science
-
10.1109/99.326669
-
Gallopoulos E, Houstis E, Rice JR (1994) Computer as thinker/doer: problem-solving environments for computational science. IEEE Comput Sci Eng 111:11-23 10.1109/99.326669
-
(1994)
IEEE Comput Sci Eng
, vol.1
, pp. 11-23
-
-
Gallopoulos, E.1
Houstis, E.2
Rice, J.R.3
-
14
-
-
0032624365
-
WBCSim: A prototype problem solving environment for wood-based composites simulations
-
10.1007/s003660050014
-
Goel A, Phanouriou C, Kamke FA, Ribbens CJ, Shaffer CA, Watson LT (1999) WBCSim: A prototype problem solving environment for wood-based composites simulations. Eng Comput 15:198-210 10.1007/s003660050014
-
(1999)
Eng Comput
, vol.15
, pp. 198-210
-
-
Goel, A.1
Phanouriou, C.2
Kamke, F.A.3
Ribbens, C.J.4
Shaffer, C.A.5
Watson, L.T.6
-
15
-
-
0012422092
-
VizCraft: A problem-solving environment for aircraft configuration design
-
Goel A, Baker CA, Shaffer CA, Grossman B, Mason WH, Watson LT, Haftka RT (2001) VizCraft: A problem-solving environment for aircraft configuration design. IEEE Comput Sci Eng 3:56-66
-
(2001)
IEEE Comput Sci Eng
, vol.3
, pp. 56-66
-
-
Goel, A.1
Baker, C.A.2
Shaffer, C.A.3
Grossman, B.4
Mason, W.H.5
Watson, L.T.6
Haftka, R.T.7
-
16
-
-
0013150545
-
A model to predict the density profile of particleboard
-
1:CAS:528:DyaL2sXhtVCjt7w%3D
-
Harless TEG, Wagner FG, Short PH, Seale RD, Mitchell PH, Ladd DS (1987) A model to predict the density profile of particleboard. Wood Fiber Sci 19:81-92 1:CAS:528:DyaL2sXhtVCjt7w%3D
-
(1987)
Wood Fiber Sci
, vol.19
, pp. 81-92
-
-
Harless, T.E.G.1
Wagner, F.G.2
Short, P.H.3
Seale, R.D.4
Mitchell, P.H.5
Ladd, D.S.6
-
17
-
-
0041388477
-
Numerical simulation of pressing wood-fiber composites
-
PhD Dissertation, Forest Products Dept., Oregon State University, Corvallis
-
Haselein CR (1998) Numerical simulation of pressing wood-fiber composites. PhD Dissertation, Forest Products Dept., Oregon State University, Corvallis
-
(1998)
-
-
Haselein, C.R.1
-
18
-
-
0011936717
-
Physical aspects of wood particleboard manufacture
-
PhD Dissertation, University of Wales, Bangor
-
Humphrey PE (1982) Physical aspects of wood particleboard manufacture. PhD Dissertation, University of Wales, Bangor
-
(1982)
-
-
Humphrey, P.E.1
-
19
-
-
84943486256
-
The hot-pressing of dry-formed wood-based composites. Part II. A simulation model for heat and moisture transfer, and typical results
-
1:CAS:528:DyaL1MXltFOisr4%3D
-
Humphrey PE (1989) The hot-pressing of dry-formed wood-based composites. Part II. A simulation model for heat and moisture transfer, and typical results. Holzforschung 43:199-206 1:CAS:528:DyaL1MXltFOisr4%3D
-
(1989)
Holzforschung
, vol.43
, pp. 199-206
-
-
Humphrey, P.E.1
-
20
-
-
0002240029
-
Sieve: A Java-based collaborative visualization environment
-
Phoenix, AZ
-
Isenhour PL, Begole J, Heagy WS, Shaffer CA (1997) Sieve: A Java-based collaborative visualization environment. Late Breaking Hot Topics Proceedings, IEEE Visualization '97, Phoenix, AZ, pp 13-16
-
(1997)
Late Breaking Hot Topics Proceedings, IEEE Visualization '97
, pp. 13-16
-
-
Isenhour, P.L.1
Begole, J.2
Heagy, W.S.3
Shaffer, C.A.4
-
21
-
-
0022664452
-
Computer simulation of a rotary dryer: Retention time
-
Kamke FA, Wilson JB (1985) Computer simulation of a rotary dryer: retention time. Am Inst Chem Eng J 32(2):2263-268
-
(1985)
Am Inst Chem Eng J
, vol.32
, Issue.2
, pp. 263-268
-
-
Kamke, F.A.1
Wilson, J.B.2
-
22
-
-
0022659312
-
Computer simulation of a rotary dryer: Heat and mass transfer
-
Kamke FA, Wilson JB (1985) Computer simulation of a rotary dryer: Heat and mass transfer. Am Inst Chem Eng J 322(2):269-275
-
(1985)
Am Inst Chem Eng J
, vol.32
, Issue.2
, pp. 269-275
-
-
Kamke, F.A.1
Wilson, J.B.2
-
23
-
-
0020871101
-
Heat and moisture movement in wood composite materials during the pressing operation - A simplified model
-
Lewis RW, Morgan K, Schrefler BA (eds) Wiley, New York
-
Kayihan F, Johnson A (1983) Heat and moisture movement in wood composite materials during the pressing operation - a simplified model. In: Lewis RW, Morgan K, Schrefler BA (eds) Numerical methods in heat transfer, vol 2. Wiley, New York, pp 511-531
-
(1983)
Numerical Methods in Heat Transfer
, vol.2
, pp. 511-531
-
-
Kayihan, F.1
Johnson, A.2
-
25
-
-
0030367104
-
A model for viscoelastic consolidation of wood-strand mats. Part I. Structural characterization of the mat via Monte Carlo Simulation
-
1:CAS:528:DyaK28XjvF2ntr0%3D
-
Lang ME, Wolcott MP (1996) A model for viscoelastic consolidation of wood-strand mats. Part I. Structural characterization of the mat via Monte Carlo Simulation. Wood and Fiber Science 28:100-109 1:CAS:528:DyaK28XjvF2ntr0%3D
-
(1996)
Wood and Fiber Science
, vol.28
, pp. 100-109
-
-
Lang, M.E.1
Wolcott, M.P.2
-
26
-
-
0030370067
-
A model for viscoelastic consolidation of wood-strand mats. Part II. Static stress-strain behavior of the mat
-
1:CAS:528:DyaK28XkvVWnsL4%3D
-
Lang ME, Wolcott MP (1996) A model for viscoelastic consolidation of wood-strand mats. Part II. Static stress-strain behavior of the mat. Wood and Fiber Science 28:369-379 1:CAS:528:DyaK28XkvVWnsL4%3D
-
(1996)
Wood and Fiber Science
, vol.28
, pp. 369-379
-
-
Lang, M.E.1
Wolcott, M.P.2
-
27
-
-
0005489423
-
Organization of wood elements in partially oriented flakeboard mats
-
PhD Dissertation. Dept. of Forestry, University of British Columbia, Vancouver, BC
-
Lu C (1999) Organization of wood elements in partially oriented flakeboard mats. PhD Dissertation. Dept. of Forestry, University of British Columbia, Vancouver, BC
-
(1999)
-
-
Lu, C.1
-
29
-
-
0345071633
-
Modelling the cure of adhesive-wood bonds using high frequency energy
-
Final Report, U. S. Slovene Joint Board on Scientific and Technological Cooperation. Project 95-AES10. University of Ljubljana, Ljubljana
-
Resnik J, Kamke FA (1998) Modelling the cure of adhesive-wood bonds using high frequency energy. Final Report, U. S. Slovene Joint Board on Scientific and Technological Cooperation. Project 95-AES10. University of Ljubljana, Ljubljana
-
(1998)
-
-
Resnik, J.1
Kamke, F.A.2
-
30
-
-
1142291503
-
Features of problem solving environments for computational science
-
Tentner A (ed) Soc. for Computer Simulation Internat, San Diego
-
Shaffer CA, Watson LT, Kafura DG, Ramakrishnan N (2000) Features of problem solving environments for computational science. In: Tentner A (ed) Proc. high performance computing symp. 2000, Soc. for Computer Simulation Internat, San Diego, pp 242-247
-
(2000)
Proc. High Performance Computing Symp. 2000
, pp. 242-247
-
-
Shaffer, C.A.1
Watson, L.T.2
Kafura, D.G.3
Ramakrishnan, N.4
-
31
-
-
0041388475
-
Modeling the physical processes in natural fiber composites during batch and continuous pressing
-
PhD dissertation. Forest Products Dept., Oregon State University, Corvallis
-
Thöemen H (2000) Modeling the physical processes in natural fiber composites during batch and continuous pressing. PhD dissertation. Forest Products Dept., Oregon State University, Corvallis
-
(2000)
-
-
Thöemen, H.1
-
32
-
-
0004081663
-
-
Vanderplaats Research & Development, Inc. Colorado Springs, CO
-
Vanderplaats Research & Development, Inc. (1995) DOT Users Manual, Version 4.20. Colorado Springs, CO
-
(1995)
DOT Users Manual, Version 4.20
-
-
-
33
-
-
0004149831
-
-
3 Wolfram Media/Cambridge University Press Cambridge
-
S Wolfram 1996 The mathematica book 3 Wolfram Media/Cambridge University Press Cambridge 148-155
-
(1996)
The Mathematica Book
, pp. 148-155
-
-
Wolfram, S.1
-
34
-
-
1142291505
-
Modeling the transient effects during the hot-pressing of wood-based composites
-
PhD Dissertation, Virginia Polytechnic Institute and State University, Blacksburg
-
Zombori BG (2001) Modeling the transient effects during the hot-pressing of wood-based composites. PhD Dissertation, Virginia Polytechnic Institute and State University, Blacksburg
-
(2001)
-
-
Zombori, B.G.1
-
35
-
-
0013096161
-
Simulation of the mat formation process
-
1:CAS:528:DC%2BD3MXnvFSisbc%3D
-
Zombori BG, Kamke FA, Watson LT (2001) Simulation of the mat formation process. Wood Fiber Sci 333:564-580 1:CAS:528:DC%2BD3MXnvFSisbc%3D
-
(2001)
Wood Fiber Sci
, vol.33
, pp. 564-580
-
-
Zombori, B.G.1
Kamke, F.A.2
Watson, L.T.3
|