Weight loss and surface roughness of hard chairside reline resins after toothbrushing: Influence of postpolymerization treatments

International Journal of Prosthodontics

Volumn 19, Issue 3, 2006, Pages 281-287

  Mendonça, Márcio José ^a   Machado, Ana Lúcia ^b   Giampaolo, Eunice Teresinha ^b   Pavarina, Ana Cláudia ^b   Vergani, Carlos Eduardo ^b  

^a UNIVERSIDADE ESTADUAL DO OESTE DO PARANÁ   (Brazil)

^b SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

ACRYLIC ACID RESIN; BIOMEDICAL AND DENTAL MATERIALS; DURALINER II; KOOLINER; LUCITONE; METHACRYLIC ACID DERIVATIVE; POLYMER; TOKUSO REBASE FAST; TOOTHPASTE; WATER;

ARTICLE; CHEMISTRY; COMPARATIVE STUDY; DENTURE; HUMAN; INSTRUMENTATION; MATERIALS TESTING; MICROWAVE RADIATION; RADIATION EXPOSURE; SURFACE PROPERTY; TOOTH BRUSHING;

ACRYLIC RESINS; DENTAL MATERIALS; DENTIFRICES; DENTURE BASES; DENTURE LINERS; DENTURE REBASING; HUMANS; MATERIALS TESTING; METHACRYLATES; MICROWAVES; POLYMERS; SURFACE PROPERTIES; TOOTHBRUSHING; WATER;

EID: 33745020922     PISSN: 08932174     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (43)

1. Arima T, Murata H, Hamada T. Properties of highly cross-linked autopolymerizing reline acrylic resins. J Prosthet Dent 1995;73:55-59.
2. Rawls HR. Dental polymers. In: Anusavice KJ (ed). Phillip's Science of Dental Materials. St Louis: Saunders, 2003:143-169.
3. Sexson JC, Phillips RW. Studies on the effects of abrasives on acrylic resins. J Prosthet Dent 1951;1:454-471.
4. Jagger DC, Harrison A. Denture cleansing-The best approach. Br Dent J 1995;178:413-417.
5. Coelho CM, Sousa YT, Dare AM. Denture-related oral mucosal lesions in a Brazilian school of dentistry. J Oral Rehabil 2004;31:135-139.
6. Heath JR, Davenport JC, Jones PA. The abrasion of acrylic resin by cleaning pastes. J Oral Rehabil 1983;10:159-175.
7. Mair LH, Stolarski TA, Vowlest RW, Lloyd CH. Wear: Mechanisms, manifestations and measurement. Report of a workshop. J Dent 1996;24:141-148.
8. Verran J, Maryan CJ. Retention of Candida albicans on acrylic resin and silicone of different surface topography. J Prosthet Dent 1997;77:535-539.
9. Bollen CML, Lambrechts P, Quirynen M. Comparison of surface roughness of hard materials to the threshold surface roughness for bacterial plaque retention: A review of the literature. Dent Mater 1997;13:258-269.
10. Zissis AJ, Polyzois GL, Yannikakis SA, Harrison A. Roughness of denture materials: A comparative study. Int J Prosthodont 2000;13:136-140.
11. Webb BC, Thomas CJ, Willcox MDP, Harty DWS, Knox KW. Candida-associated denture stomatitis. Aetiology and management: A review. Aust Dent J 1998;43:45-50.
12. Vieira DF, Phillips RW. Influence of certain variables on the abrasion of acrylic resin veneering materials. J Prosthet Dent 1962;12:720-731.
13. Wictorin L. Effect of toothbrushing on acrylic resin veneering material. II. Abrasive effect of selected dentifrices and toothbrushes. Acta Odontol Scand 1972;30:383-395.
14. Hengchang X, Söremark R, Wiktorsson G, Tong W, Wengyi L. Abrasion of acrylic veneers by simulated toothbrushing. Acta Odontol Scand 1984;42:367-370.
15. Kawai K, Iwami Y, Ebisu S. Effect of resin monomer composition on toothbrush wear resistance. J Oral Rehabil 1998;25:264-268.
16. Richmond R, Macfarlane TV, McCord JF. An evaluation of the surface changes in PMMA biomaterial formulations as a result of toothbrush/dentifrice abrasion. Dent Mater 2004;20:124-132.
17. Stafford GD, Bates JF, Huggett R, Handley RW. A review of the properties of some denture base polymers. J Dent 1980;8:292-306.
18. Yunus N, Harrison A, Huggett R. Effect of microwave irradiation on the flexural strength and residual monomer levels of an acrylic resin repair material. J Oral Rehabil 1994;21:641-648.
19. Beech DR. Molecular weight distribution of denture base acrylic. J Dent 1975;3:19-24.
20. Robinson JG, McCabe JF, Storer R. Denture bases: The effects of various treatments on clarity, strength and structure. J Dent 1987;15:150-165.
21. Takahashi Y, Kawaguchi M, Chai J. Flexural strength at the proportional limit of a denture base material relined with four different denture reline materials. Int J Prosthodont 1997;10:508-512.
22. Arab J, Newton JP, Lloyd CH. The effect of an elevated level of residual monomer on the whitening of a denture base and its physical properties. J Dent 1989;17:189-194.
23. Dogan A, Bek B, Çevik NN, Usanmaz A. The effect of preparation conditions of acrylic denture base materials on the level of residual monomer, mechanical properties and water absorption. J Dent 1995;23:313-318.
24. Fujii K. Fatigue properties of acrylic denture base resins. Dent Mater J 1989;8:243-259.
25. Vallittu PK, Miettinen V, Alakuijala P. Residual monomer content and its release into water from denture base materials. Dent Mater 1995;11:338-342.
26. Lee SY, Lai YL, Hsu TS. Influence of polymerization conditions on monomer elution and microhardness of autopolymerized polymethyl methacrylate resin. Eur J Oral Sci 2002;110:179-183.
27. Yatabe M, Seki H, Shirasu IM, Sone M. Effect of the reducing agent on the oxygen-inhibited layer of the cross-linked reline material. J Oral Rehabil 2001;28:180-185.
28. Vallittu PK. The effect of surface treatment of denture acrylic resin on the residual monomer content and its release into water. Acta Odontol Scand 1996;54:188-192.
29. Haselden CA, Hobkirk JA, Pearson GJ, Davies EH. A comparison between the wear resistance of three types of denture resin to three different dentifrices. J Oral Rehabil 1998;25:335-339.
30. Lamb DJ, Ellis B, Priestley D. The effects of process variables on levels of residual monomer in autopolymerizing dental acrylic resin. J Dent 1983;11:80-88.
31. Lamb DJ, Ellis B, Priestley D. Loss into water of residual monomer from autopolymerizing dental acrylic resin. Biomater 1982;3:155-159.
32. Tsuchiya H, Hoshino Y, Tajima K, Takagi N. Leaching and cytotoxicity of formaldehyde and methyl methacrylate from acrylic resin denture base materials. J Prosthet Dent 1994;71:618-624.
33. Mello JAN, Braun KO, Rached RN, Del Bel Cury AA. Reducing the negative effects of chemical polishing in acrylic resins by use of an additional cycle of polymerization. J Prosthet Dent 2003;89:598-602.
34. De Clerk JP. Microwave polymerization of acrylic resins used in dental prostheses. J Prosthet Dent 1987;57:650-658.
35. Dixon DL, Breeding LC, Faler TA. Microwave disinfection of denture base materials colonized with Candida albicans. J Prosthet Dent 1999;81:207-214.
36. Neppelenbroek KH, Pavarina AC, Spolidorio DM, Vergani CE, Mima EG, Machado AL. Effectiveness of microwave sterilization on three hard chairside reline resins. Int J Prosthodont 2003;16:616-620.
37. Vergani CE, Seó RS, Pavarina AC, Reis JMSN. Flexural strength of auto-polymerizing denture reline resins with microwave post-polymerization treatment. J Prosthet Dent 2005;93:577-583.
38. Blagojevic V, Murphy VM. Microwave polymerization of denture base materials. A comparative study. J Oral Rehabil 1999;26:804-808.
39. American National Standard. Specifications No. 12 for Denture Base Polymer. Chicago: American Dental Association, 1975 (Reaffirmed, 1999).
40. Machado AL, Vergani CE, Giampaolo ET, Pavarina AC. Effect of a heat-treatment on the linear dimensional change of a hard chairside reline resin. J Prosthet Dent 2002;88:611-615.
41. Ilbay SG, Güvener S, Alkumru HN. Processing dentures using a microwave technique. J Oral Rehabil 1994;21:103-109.
42. Phaneuf EA, Harrington JH, Dale PP, Shklar G. Automatic toothbrush: A new reciprocating action. J Am Dent Assoc 1962;65:12-25.
43. Harrison Z, Johnson A, Douglas CWI. An in vitro study into the effect of a limited range of denture cleaners on surface roughness and removal of Candida albicans from conventional heat-cured acrylic resin denture base material. J Oral Rehabil 2004;31:460-467.