Dynamic buckling of functionally graded spherical caps

AIAA Journal

Volumn 44, Issue 5, 2006, Pages 1097-1102

  Sundararajan, N ^a,d   Prakash, T ^b,d   Ganapathi, M ^c,e  

^a INDIAN INSTITUTE OF TECHNOLOGY MADRAS   (India)

^b INDIAN INSTITUTE OF TECHNOLOGY DELHI   (India)

^c DEFENCE INSTITUTE OF ADVANCED TECHNOLOGY   (India)

^d Department of Aerospace Engineering ^*

^e Finite Element Analysis Group   (India)

Author keywords

[No Author keywords available]

Indexed keywords

FIELD CONSISTENCY APPROACH; HOMOGENIZATION METHOD; ROTARY INERTIA EFFECTS;

BUCKLING; COMPUTATIONAL GEOMETRY; ITERATIVE METHODS; NUMERICAL ANALYSIS; SHEAR DEFORMATION; STRAIN;

SHELLS (STRUCTURES);

EID: 33744755075     PISSN: 00011452     EISSN: None     Source Type: Journal    
DOI: 10.2514/1.17320     Document Type: Article

References (51)

1. Koizumi, M., "FGM Activities in Japan," Composites Part B: Engineering, Vol. 28, No. 1-2, 1997, pp. 1-4.
2. Suresh, S., and Mortensen, A., Fundamentals of Functionally Graded Materials, Inst. of Materials, London, 1998.
3. Fukui, Y., "Fundamental Investigation of Functionally Gradient Material Manufacturing System Using Centrifugal Force," JSME International Journal, Series III, Vol. 34, No. 1, 1991, pp. 144-148.
4. Koizumi, M., "The Concept of FGM," Ceramic Transactions Functionally Graded Material, Vol. 34, 1993, pp. 3-10.
5. Yamaoka, H., Yuki, M., Tahara, K., Irisawa, T., Watanabe, R., and Kawasaki, A., "Fabrication of Functionally Gradient Material by Slurry Stacking and Sintering Process," Ceramic Transactions Functionally Gradient Material, Vol. 34, 1993, pp. 165-172.
6. Wetherhold, R. C., Seelman, S., and Wang, J. Z., "Use of Functionally Graded Materials to Eliminate or Control Thermal Deformation," Composites Science and Technology, Vol. 56, 1996, pp. 1099-1144.
7. Survey for Application of FGM, FGM Forum, Japan Society of Non-Traditional Technology, Dept. of Material Science and Engineering, Tsinghua Univ., Tokyo, 1991.
8. Praveen, G. N., and Reddy, J. N., "Nonlinear Transient Thermoelastic Analysis of Functionally Graded Ceramic-Metal Plates," International Journal of Solids and Structures, Vol. 35, No. 33, 1998, pp. 4457-4476.
9. Lanhe, Wu, "Thermal Buckling of a Simply Supported Moderately Thick ectangular FGM Plate," Composite Structures, Vol. 64, 2004, pp. 211-218.
10. Tauchert, T. R., "Thermally Induced Flexure, Buckling and Vibration f Plates," Applied Mechanics Reviews, Vol. 44, No. 8, 1991, pp. 347-360.
11. Ma, L. S., and Wang, T. J., "Nonlinear Bending and Post-Buckling of a Functionally Graded Circular Plate Under Mechanical and Thermal Loadings," International Journal of Solids and Structures, Vol. 40, 2003, pp. 3311-3330.
12. Yang, J., Kitipornchai, S., and Liew, K. M., "Large Amplitude Vibration of Thermo-Electro-Mechanically Stressed FGM Laminated Plates," Computer Methods in Applied Mechanics and Engineering, Vol. 192, 2003, pp. 3861-3885.
13. Budiansky, B., and Roth, R. S., "Axisymmetric Dynamic Buckling of Clamped Shallow Spherical Shells," NASA TND-510, 1962, pp. 597-609.
14. Simitses, G. J., "Axisymmetric Dynamic Snap-Through Buckling of Shallow Spherical Caps," AIAA Journal, Vol. 5, 1967, pp. 1019-1021.
15. Haung, N. C., "Axisymmetric Dynamic Snap-Through of Elastic Clamped Shallow Shell," AIAA Journal, Vol. 7, 1969, pp. 215-220.
16. Stephens, W. B., and Fulton, R. E., "Axisymmetric Static and Dynamic Buckling of Spherical Caps Due to Centrally Distributed Pressure," AIAA Journal, Vol. 7, 1969, pp. 2120-2126.
17. Ball, R. E., and Burt, J. A., "Dynamic Buckling of Shallow Spherical Shells," Journal of Applied Mechanics, Vol. 41, 1973, pp. 611-416.
18. Stricklin, J. A., and Martinez, J. E., "Dynamic Buckling of Clamped Spherical Cap Under Step Pressure Loadings," AIAA Journal, Vol. 7, 1969, pp. 1212, 1213.
19. Kao, R., and Perrone, N., "Dynamic Buckling of Axisymmetic Spherical Caps with Initial Imperfection," Computers and Structures, Vol. 9, 1978, pp. 463-473.
20. Kao, R., "Nonlinear Dynamic Buckling of Spherical Caps with Initial Imperfection," Computers and Structures, Vol. 12, 1980, pp. 49-63.
21. Saigal, S., Yang, T. Y., and Kapania, R. K., "Dynamic Buckling of Imperfection Sensistive Shell Structures," Journal of Aircraft, Vol. 24, 1987, pp. 718-724.
22. Yang, T. Y., and Liaw, D. G., "Elastic-Plastic Dynamic Buckling of Thin Shell Finite Elements with Asymmetric Imperfections," AIAA Journal, Vol. 25, 1988, pp. 479-485.
23. Alwar, R. S., and Sekhar Reddy, B., "Dynamic Buckling of Isotropic and Orthotropic Shallow Spherical Caps with Circular Hole," International Journal of Mechanical Sciences, Vol. 21, 1979, pp. 681-688.
24. Chao, C. C., and Lin, I. S., "Static and Dynamic Snap-Through of Orthotropic Spherical Caps," Composite Structures, Vol. 14, 1990, pp. 281-301.
25. Ganapathi, M., Gupta, S. S., and Patel, B. P., "Nonlinear Axisymmetric Dynamic Buckling of Laminated Angle-Ply Composite Spherical Caps," Composite Structures, Vol. 59, 2003, pp. 89-97.
26. Makino, A., Araki, N., Kitajima, H., and Ohashi, K., "Transient Temperature Response of Functionally Gradient Material Subjected to Partial, Stepwise Heating," Transactions of the JSME, Part B, Vol. 60, 1994, pp. 4200-4206.
27. Obata, Y., and Noda, N., "Steady Thermal Stresses in a Hollow Circular Cylinder and a Hollow Sphere of a Functionally Gradient Material," Journal of Thermal Stressen, Vol. 17, 1994, pp. 471-487.
28. Takezono, S., Tao, K., Inamura, E., and Inoue, M., "Thermal Stress and Deformation in Functionally Graded Material Shells of Revolution Under Thermal Loading Due to Fluid," JSME International. Series A: Mechanics and Material Engineering, Vol. 39, 1994, pp. 573-581.
29. Durodola, J. F., and Adlington, J. E., "Functionally Graded Material Properties for Disks and Rotors," Proceedings of the 1st International Conference on Ceramic and Metal Matrix Composites, 1996.
30. Oh, S.-Y., Librescu, L., and Song, O., "Thin-Walled Rotating Blades Made of Functionally Graded Materials: Modelling and Vibration Analysis," AIAA Paper 2003-1541, 2003.
31. Dao, M., Gu, P., Maeqal, A., and Asaro, R., "A Micro Mechanical Study of a Residual Stress in Functionally Graded Materials," Acta Materialia, Vol. 45, 1997, pp. 3265-3276.
32. Weisenbek, E., Pettermann, H. E., and Suresh, S., "Elasto-Plastic Deformation of Compositionally Graded Metal-Ceramic Composites," Acta Materialia, Vol. 45, 1997, pp. 3401-3417.
33. Li, C., Weng, Z., and Duan, Z., "Dynamic Behavior of a Cylindrical Crack in a Functionally Graded Interlayer Under Torsional Loading," International Journal of Solids and Structures, Vol. 38, 2001, pp. 7473-7485.
34. Li, C., Weng, Z., and Duan, Z., "Dynamic Stress Intensity Factor of a Functionally Graded Material with a Finite Crack Under Anti-Plane Shear Loading," Acta Mechanica, Vol. 149, 2001, pp. 1-10.
35. Zhang, C., Savaids, A., Savaids, G., and Zhu, H., "Transient Dynamic Analysis of a Cracked Functionally Graded Material by BIEM," Computational Materials Science, Vol. 26, 2003, pp. 167-174.
36. Loy, C. T., Lam, K. Y., and Reddy, J. N., "Vibration of Functionally Graded Cylindrical Shells," International Journal of Mechanical Sciences, Vol. 1, 1999, pp. 309-324.
37. Ng, T. Y., Lam, K. Y., Liew, K. M., and Reddy, N.J., "Dynamic Stability Analysis of Functionally Graded Cylindrical Shells Under Periodic Axial Loading," International Journal of Solids and Structures, Vol. 38, 2001, pp. 1295-1309.
38. Prathap, G., and Ramesh Babu, C., "A Field-Consistent Three-Noded Quadratic Curved Axisymmetric Shell Element," International Journal for Numerical Methods in Engineering, Vol. 23, 1986, pp. 711-723.
39. Simitses, G. J., Dynamic Stability of Suddenly Loaded Structures, Springer-Verlag, New York, 1989.
40. Mori, T., and Tanaka, K., "Average Stress in Matrix and Average Elastic Energy of Materials with Misfitting Inclusions," Acta Metallurgica, Vol. 21, 1973, pp. 571-574.
41. Benveniste, Y., "A New Approach to the Application of Mori-Tanaka's Theory in Composite Materials," Mechanics of Materials, Vol. 6, 1987, pp. 147-157.
42. Qian, L. F., Batra, R. C., and Chen, L. M., "Static and Dynamic Deformations of Thick Functionally Graded Elastic Plates, by Using Higher-Order Shear and Normal Deformable Plate Theory and Meshless Local Petrov-Galerkin Method," Composites Part B: Engineering, Vol. 35, 2004, pp. 685-697.
43. Hatta, H., and Taya, M., "Effective Thermal Conductivity of a Misoriented Short Fiber Composite," Journal of Applied Physics, Vol. 58, 1985, pp. 2478-2486.
44. Rosen, B. W., and Hashin, Z., "Effective Thermal Expansion Coefficients and Specific Heats of Composite Materials," International Journal of Engineering Science, Vol. 8, 1970, pp. 157-173.
45. Vel, S. S., and Batra, R. C., "Three-Dimensional Exact Solution for the Vibration of Functionally Graded Rectangular Plates," Journal of Sound and Vibration, Vol. 272, 2004, pp. 703-730.
46. Kraus, H., Thin Elastic Shells, Wiley, New York, 1967.
47. Rajasekaran, S., and Murray, D. W., "Incremental Finite Element Matrices," Journal of Structures Division, ASCE, Vol. 99, 1973, pp. 2423-2438.
48. Subbaraj, K., and Dokainish, M. A., "A Survey of Direct Time-Integration Methods in Computational Structural Dynamics II: Implicit Methods," Computers and Structures, Vol. 32, 1989, pp. 1387-1401.
49. Bergan, P. G., and Clough, R. W., "Convergence Criteria for Iterative Process," AIAA Journal, Vol. 10, 1972, pp. 1107-1108.
50. Leech, J. N., "Stability of Finite Difference Equations for the Transient Response of a Flat Plate,"AIAA Journal, Vol. 3, 1965, pp. 1772, 1773.
51. Reddy, J. N., and Chin, C. D., "Thermomechanical Analysis of Functionally Graded Cylinders and Plates," Journal of Thermal Stresses, Vol. 21, 1998, pp. 593-629.