Theoretical and experimental studies of anisotropic shrinkage in injection moldings of semicrystalline polymers

Polymer Engineering and Science

Volumn 46, Issue 6, 2006, Pages 712-728

  Kwon, Keehae ^a   Isayev, A I ^a   Kim, K H ^a   Van Sweden, C ^a  

^a University of Akron   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ANISOTROPY; CRYSTAL ORIENTATION; CRYSTALLINE MATERIALS; CRYSTALLIZATION; INJECTION MOLDING; SHRINKAGE;

AMORPHOUS BIREFRINGENCE; CRYSTALLIZATION KINETICS; ELASTIC RECOVERY; FLOW-INDUCED CRYSTALLIZATION;

POLYMERS;

EID: 33744496541     PISSN: 00323888     EISSN: 15482634     Source Type: Journal    
DOI: 10.1002/pen.20546     Document Type: Article

References (53)

1. I.D. Hoffman, G.T. Davis, and S.I. Lauritzen, "Crystalline and Noncrystalline Solid," in Treatise on Solid State Chemistry, Vol. 3, Ch. 7, N.B. Hannay, editor, Plenum, New York (1976).
2. K. Nakamura, T. Watanabe, K. Katayama, and T. Amano, J. Appl. Polym. Sci., 16, 1077 (1972).
3. K. Nakamura, K. Katayama, and T. Amano, J. Appl. Polym. Sci., 17, 1031 (1973).
4. W. Schneider, A. Koeppl, and J. Berger, Int. Polym. Process., 2(3/4),151 (1988).
5. M. Avrami, J. Chem. Phys., 7, 1103 (1939).
6. A.N. Kolmogoroff, Isv. Akad. Nauk SSSR Ser. Math., 1, 355 (1937).
7. P.J. Flory, J. Chem. Phys., 15, 397 (1947).
8. W.J. Dunning, Trans. Faraday Soc., 50, 1115 (1954).
9. W.R. Krigbaum and R.J. Roe, J. Polym. Sci. Part A: Gen. Pap., 2, 4391 (1964).
10. T.W. Haas and B. Maxwell, Polym. Eng. Sci., 9, 225 (1969).
11. R.J. Gaylord, J. Polym. Sci. Polym. Phys. Ed., 14, 1827 (1976).
12. A. Ziabicki, Colloid Polym. Sci., 252, 207 (1974).
13. G. Eder, H. Janeschitz-Kriegl, and S. Liedauer, Prog. Polym. Sci., 15, 629 (1990).
14. A.C. Bushman and A.J. McHugh, J. Polym. Sci. Part B: Polym. Phys., 35, 1649 (1997).
15. A.J. McHugh and A.K. Doufas, Compos. Appl. Sci. Manuf., 32, 1059 (2001).
16. A.I. Isayev, T.W. Chan, K. Shimojo, and M. Gmerek, J. Appl. Polym. Sci., 55, 807 (1995).
17. A.I. Isayev, T.W. Chan, M. Gmerek, and K. Shimojo, J. Appl. Polym. Sci., 55, 821 (1995).
18. X. Guo, A.I. Isayev, and L. Guo, Polym. Eng. Sci., 39, 2096 (1999).
19. X. Guo, A.I. Isayev, and M. Demiray, Polym. Eng. Sci., 39, 2132 (1999).
20. K.P. Palluch and A.I. Isayev, "Rheological Modeling of Stress-Induced Crystallization," in the Proceedings Of the 13th International Congress on Rheology, Vol. 2, British Society of Rheology; Cambridge, UK, 94 (2000).
21. K.H. Kim, A.I. Isayev, and K. Kwon, SPE ANTEC, 49, 713 (2003).
22. K.H. Kim, A.I. Isayev, and K. Kwon, J. Appl. Polym. Sci., 95, 502 (2005).
23. K.H. Kim, A.I. Isayev, K. Kwon, and C. van Sweden, Polymer, 46, 4183 (2005).
24. H.O. Hellmeyer and G. Menges, SPE ANTEC, 22, 386 (1976).
25. A.I. Isayev and T. Hariharan, Polym. Eng. Sci., 25, 271 (1985).
26. H.H. Chiang, K. Himasekhar, N. Santhanam, and K.K. Wang, J. Eng. Mater. Technol. Trans. ASME, 115, 37 (1993).
27. W.C. Bushko and V.K. Stokes, Polym. Eng. Sci., 35, 351 (1995).
28. W.C. Bushko and V.K. Stokes, Polym. Eng. Sci., 35, 365 (1995).
29. K.M.B. Jansen and G. Titomanlio, Polym. Eng. Sci., 36, 2029 (1996).
30. G. Titomanlio and K.M.B. Jansen, Polym. Eng. Sci., 36, 2041 (1996).
31. K.M.B. Jansen, R. Pantani, and G. Titomanlio, Polym. Eng. Sci., 38, 254 (1998).
32. K.M.B. Jansen, Int. Polym. Process., 13, 309 (1998).
33. S. Han and K.K. Wang, Int. Polym. Process., 12, 228 (1997).
34. C.A. Hieber, Polym. Eng. Sci., 42, 1387 (2002).
35. P. Kennedy and R. Zheng, SPE ANTEC, 49, 593 (2003).
36. A.I. Isayev and C.A. Hieber, Rheol. Acta, 19, 168 (1980).
37. A.I. Leonov, Rheol. Acta, 15, 85 (1976).
38. M. Sobhanie and A.I. Isayev, Rubber Chem. Technol., 62, 939 (1989).
39. A.I. Isayev (editor), in Injection and Compression Molding Fundamentals, Ch. 1, Marcel Dekker, New York (1987).
40. P.H. Hermans, Contributions to the Physics of Cellulose Fibers, Elsevier, New York, 198 (1946).
41. R.S. Stein, Polym. Eng. Sci., 16, 152 (1976).
42. N. Famili and A.I. Isayev, in Modeling of Polymer Processing, Ch. 8, A. I. Isayev, editor, Hanser Publishers, New York (1991).
43. R.K. Upadhyay, A.I. Isayev, and S.F. Shen, Rheol. Acta, 20, 443 (1981).
44. L.R.G. Treloar, The Physics of Rubber Elasticity, 2nd ed., Clarendon, Oxford, 342 (1958).
45. J. Hennig, J. Polym. Sci. Part C: Polym. Symp., 16, 2751 (1967).
46. C.L. Choy, F.C. Chen, and E.L. Ong, Polymer, 20, 1191 (1979).
47. R.S. Spencer and G.D. Gilmore, J. Appl. Phys., 20, 502 (1949).
48. D.W. Van Krevelen, Properties of Polymers, 3rd ed., Elsevier, Amsterdam (1990).
49. J. Brandrup and E.H. Immergut, Polymer Handbook, 4th ed., Wiley-Interscience, New York (1989).
50. A.I. Isayev and B.F. Catlgnani, Polym. Eng. Sci., 37, 1526 (1997).
51. L. Guo, M.S. Dissertation, The University of Akron (1995).
52. H.H. Chiang, C.A. Hieber, and K.K. Wang, Polym. Eng. Sci., 31, 125 (1991).
53. G.A. Evens, Practical Numerical Analysis, Wiley, New York (1995).