Microstructural changes during wear by plastic deformation of cemented carbide and cermet cutting inserts

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 37, Issue 5, 2006, Pages 1495-1506

  Östberg, Gustaf ^a   Andrén, Hans Olof ^a  

^a CHALMERS UNIVERSITY OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

CARBIDES; CERMETS; DIFFUSION; DISSOLUTION; GRAIN BOUNDARIES; INFILTRATION; PLASTIC DEFORMATION; WEAR OF MATERIALS;

CEMENTED CARBIDE; CERMET CUTTING INSERTS; MICROSTRUCTURAL CHANGES;

CRYSTAL MICROSTRUCTURE;

EID: 33646700557     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-006-0094-y     Document Type: Article

References (43)

1. J. Lin and C.-Y. Liu: Meas. Sci. Technol., 2001, vol. 12 (8), pp. 1243-49.
2. Y.-C. Yen, J. Sohner, B. Lilly, and T. Altan: J. Mater. Processing Technol., 2004, vol. 146 (1), pp. 82-91.
3. S. Bolognini: in Advances in Mechanical Behaviour, Plasticity and Damage, Elsevier Science, Oxford, United Kingdom, 2000.
4. S. Bolognini, G. Feusier, D. Mari, T. Viatte, and W. Benoit: Int. J. Refract. Met. Hard Mater., 1998, vol. 16 (6), pp. 257-68.
5. S. Bolognini, G. Feusier, D. Mari, T. Viatte, and W. Benoit: Int. J. Refract. Met. Hard Mater., 2003, vol. 21, pp. 19-29.
6. K. Buss: Ph.D. Thesis, EPFL, Lausanne, Switzerland, 2004.
7. K. Buss and D. Mari: Mater. Sci. Eng., 2004, vol. A370, pp. 163-67.
8. T. Cutard, S. Bolognini, G. Feusier, C. Verdon, T. Viatte, and W. Benoit: Key Eng. Mater., 1997, vols. 132-136, pp. 747-50.
9. T. Cutard, G. Feusier, T. Viatte, and W. Benoit: Mater. Sci. Eng., 1996, vol. A209, pp. 218-27.
10. G. Feusier, T. Cutard, C. Verdon, T. Viatte, and W. Benoit: J. Phys. IV, 1996, vol. 6 (C8), pp. 751-54.
11. D. Mari, S. Bolognini, T. Viatte, and W. Benoit: Int. J. Refractory Met. Hard Mater., 2001, vol. 19 (4-6), pp. 257-65.
12. T. Viatte, T. Cutard, G. Feusier, and W. Benoit: J. Phys. IV, 1996, vol. 6 (C8), pp. 743-46.
13. J.G. Baldoni and W.S. Williams: Cer. Bull., 1978, vol. 57 (12), pp. 1100-02.
14. I.N. Chaporova, L.E. Pivovarov, V.A. Ivensen, O.N. Éiduk, T.A. Sultanyan, A.V. Varaksina, R.F. Korotkova, and V.A. Chistyakova: Effects of Plastic Deformation on the Structure of WC-Co Alloys, All-Union Scientific-Research Institute of Hard Alloys, 1969, vol. 77 (5), pp. 63-68.
15. M. Fährmann: Int. J. Refract. Met. Hard Mater., 1989, vol. 8 (4), pp. 219-23.
16. R. Gero, L. Borukhin, and I. Pikus: Mater. Sci. Eng., 2001, vol. A302, pp. 162-67.
17. V. Jayaram, A. Kronenberg, S.H. Kirby, D.J. Rowcliffe, and R. Sinclair: Scripta Metall., 1986, vol. 20, pp. 701-05.
18. S. Lay, P. Delavignette, and J. Vicens: Phys. Status Solidi., 1985, vol. 90, pp. 53-68.
19. S. Lay, J. Vicens, and F. Osterstock: J. Mater. Sci., 1987, vol. 22, pp. 1310-22.
20. L. Manlang, H. Xiaoying, D. Shitian, S. Daqin, C. Yumei, and Y. Zhenmei: Int. J. Refract. Met. Hard Mater., 1983, vol. 2 (3), pp. 129-32.
21. Y.V. Milman, S. Luyckx, V.A. Goncharuck, and J.T. Northrop: Int. J. Refract. Met. Hard Mater., 2002, vol. 20, pp. 71-79.
22. H.S. Mohand, G. Fantozzi, G. Orange, and J. Dubois: Rev. Int. Hautes. Tempér. Refract., 1982, vol. 19, pp. 311-23.
23. B. Roebuck and E.A. Almond: Int. Mater. Rev., 1988, vol. 33 (2), pp. 90-110.
24. D.J. Rowcliffe, V. Jayaram, M.K. Hibbs, and R. Sinclair: Mater. Sci. Eng., 1988, vol. A105 (106), pp. 299-303.
25. T. Sakuma: Key Eng. Mater., 1995, vols. 108-110, pp. 435-48.
26. T. Sakuma and H. Hondo: Mater. Sci. Eng., 1992, vol. A156, pp. 125-30.
27. H. Suzuki, K. Hayashi, Y. Taniguchi, and H. Matsubara: Trans. Jpn. Inst. Met., 1982, vol. 23 (2), pp. 77-84.
28. G. Wirmark, G.L. Dunlop, and C. Chatfield: Int. J. Refract. Met. Hard Mater., 1986, vol. 5 (3), pp. 153-57.
29. J. Vicens, S. Hagege, F. Osterstock, G. Nouet, and J.L. Chermant: Rev. Int. Hautes. Tempér. Refract., 1982, vol. 19, pp. 359-71.
30. G.E. Hollox and R.E. Smallman: J. Appl. Phys., 1966, vol. 37 (2), pp. 818-23.
31. M. Rettenmayr, H.E. Exner, and W. Mader: Mater. Sci. Technol., 1988, vol. 4, pp. 984-90.
32. C.H. Vasel, A.D. Krawitz, E.F. Drake, and E.A. Kenik: Metall. Trans. A, 1985, vol. 16A, pp. 2309-17.
33. W.S. Williams and R.D. Schaal: J. Appl. Phys., 1962, vol. 33 (3), pp. 955-62.
34. G. Östberg and H.-O. Andrén: Chalmers University of Technology, Göteborg, 2005, unpublished research.
35. H.-O. Andrén and H. Nordén: Scand. J. Metall., 1979, vol. 8, pp. 147-52.
36. D.J. Larson, D.T. Foord, A.K. Petford-Long, H. Liew, M.G. Blamire, A. Cerezo, and G.D.W. Smith: Ultramicroscopy, 1999, vol. 79 (1-4), pp. 287-93.
37. G. Östberg: Chalmers University of Technology, Göteborg, unpublished research.
38. A. Henjered, M. Hellsing, H.-O. Andrén, and H. Nordén: Mater. Sci. Technol., 1986, vol. 2, pp. 847-55.
39. G. Östberg, K. Buss, M. Christensen, S. Norgren, H.-O. Andrén, D. Mari, and I. Reineck: Int. J. Refract. Met. Hard Mater., 2006, vol. 24 (1-2), pp. 135-44.
40. G. Östberg, B. Jansson, and H.-O. Andrén: Scripta Mater., 2005, vol. 54, pp. 595-58.
41. R.C. Gifkins: J. Mater. Sci., 1978, vol. 13, pp. 1926-36.
42. M. Christensen and G. Wahnström: Phys. Rev. B, 2003, vol. 67, pp. 115415-1-115415-11.
43. R.W. Hertzberg: in Deformation and Fracture Mechanics of Engineering Materials, John Wiley & Sons, Singapore, 1989, pp. 271-324.