Correlation between the morphology and dynamic mechanical properties of ethylene vinyl acetate/linear low-density polyethylene blends: Effects of the blend ratio and compatibilization

Journal of Applied Polymer Science

Volumn 100, Issue 6, 2006, Pages 4526-4538

  Moly, K A ^a   Bhagawan, S S ^b   Groeninckx, G ^c   Thomas, S ^d  

^a Bishop Kurialacherry College   (India)

^b AMRITA UNIVERSITY   (India)

^c UNIVERSITY OF LEUVEN   (Belgium)

^d MAHATMA GANDHI UNIVERSITY   (India)

Author keywords

Blends; Compatibilization; Glass transition; Morphology

Indexed keywords

COMPOSITION; CRYSTALLIZATION; GLASS TRANSITION; MECHANICAL PROPERTIES; MORPHOLOGY; PHENOLS; POLYETHYLENES;

COMPATIBILIZATION; DYNAMIC MECHANICAL DATA; TANGENT CURVE;

POLYMER BLENDS;

BLEND; BLEND RATIO; COMPOSITE; CONCENTRATION; DISPERSION; LINEAR DENSITY; MATRIX; MECHANICAL PROPERTY; MORPHOLOGY; POLYETHYLENE; SPECTROSCOPY; SYNTHETIC RESIN; VISCOELASTICITY;

EID: 33646559575     PISSN: 00218995     EISSN: 10974628     Source Type: Journal    
DOI: 10.1002/app.22466     Document Type: Article

References (57)

1. Thermoplastic Elastomers from Rubber-Plastic Blends; De, S. K.; Bhowmick, A. K., Eds.; Ellis Horwood: New York, 1990.
2. Harris, B.; Braddel, O. G.; Almond, D. P.; Lefebvre, C.; Verbist, J. J Mater Sci 1993, 28, 3353.
3. Das, J.; Bandyopadhyay, S.; Blairs, S. J Mater Sci 1994, 29, 5680.
4. Wingard, C. D.; Beatty, C. L. J Appl Polym Sci 1990, 41, 2539.
5. Dynamic Mechanical Analysis of Polymeric Materials; Murayama, T. M., Ed.; Elsevier: New York, 1978.
6. Cho, K.; Ahn, T. K.; Lee, B. H.; Choe, S. J Appl Polym Sci 1997, 63, 1265.
7. Wippler, C. Polym Eng Sci 1990, 30, 17.
8. Jafari, S. H.; Gupta, A. K. J Appl Polym Sci 2000, 78, 962.
9. Oommen, Z.; Groeninckx, G.; Thomas, S. J Polym Sci Part B: Polym Phys 2000, 38, 582.
10. George, S.; Neelakantan, N. R.; Varughese, K. T.; Thomas, S. J Polym Sci Part B: Polym Phys 1997, 35, 2309.
11. John, J.; Mani, R.; Bhattacharya, M. J Polym Sci Part A: Polym Chem 2002, 40, 2003.
12. Cantor, A. S. J Appl Polym Sci 2000, 77, 826.
13. Akiyama, S.; Kobori, Y.; Sugisaki, A.; Koyama, T.; Akiba, I. Polymer 2000, 41, 4021.
14. Novikov, M. B.; Roos, A.; Creton, C.; Feldstein, M. M. Polymer 2003, 44, 3561.
15. Oulevey, F.; Burnham, N. A.; Gremaud, G.; Kulik, A. J.; Pollock, H. M.; Hammiche, A.; Reading, M.; Song, M.; Hourston, D. J. Polymer 2000, 41, 3087.
16. Cser, F.; Jollands, M.; White, P.; Bhattacharya, S. J Therm Anal Calorim 2002, 70, 651.
17. Moly, K. A.; Oommen, Z.; Bhagawan, S. S.; Groeninckx, G.; Thomas, S. J Appl Polym Sci 2002, 86, 3210.
18. Moly, K. A.; Bhagawan, S. S.; Thomas, S. Mater Lett 2002, 53, 346.
19. Coran, A. Y.; Patel, R. Rubber Chem Technol 1983, 56, 1045.
20. Varughese, K. T.; Nando, G. B.; De, P. P.; De, S. K. J Mater Sci 1988, 23, 3894.
21. Thomas, S.; George, A. Eur Polym 1992, 28, 145.
22. Walsh, D. J.; Higgins, J. S. Polymer 1982, 23, 336.
23. Thomas, S.; Gupta, G. R.; De, S. K. J Vinyl Technol 1987, 9, 71.
24. Moly, K. A.; Androsch, R.; Radhusch, H. J.; Bhagawan, S. S.; Thomas, S. Eur Polym J 2005, 41, 1410.
25. Fay, J. J.; Thomas, D. A.; Sperling, L. H. J Appl Polym Sci 1991, 43, 1617.
26. Chang, M. C. O.; Thomas, D. A.; Sperling, L. H. J Appl Polym Sci 1987, 34, 409.
27. Chang, M. C. O.; Thomas, D. A.; Sperling, L. H. J Polym Sci Part B: Polym Phys 1988, 26, 1627.
28. Thomas, S.; George, A. Eur Polym J 1992, 28, 1451.
29. Nielson, N. E. Rheol Acta 1974, 13, 86.
30. Halpin, J. Compos Mater 1970, 3, 732.
31. Coran, A. Y. In Hand Book of Elastomers: New Development and Technology; Bhomick, A. K.; Stephens, H. L., Eds.; Marcel Dekker: New York, 1988; p 249.
32. Holsti-Miettinen, R. M.; Seppala, J. V.; Ikkala, O. T.; Reima, I. T. Polym Eng Sci 1994, 34, 395.
33. Paul, D. R.; Barlow, G. W. Am Chem Soc Adv Chem Ser 1979, 176, 315.
34. Brahimi, B.; Ait-Kadi, A.; Ajji, A.; Fayt, R. J Polym Sci Part B: Polym Phys 1991, 29, 946.
35. Oommen, Z.; Gopinathan Nair, M. R.; Thomas, S. Polym Eng Sci 1996, 36, 151.
36. Asaletha, R.; Kumaran, M. G.; Thomas, S. Rubber Chem Technol 1995, 68, 671.
37. Brown, H. R.; Yang, A. C. M.; Russel, T. P.; Volksen, W.; Kramer, E. J. Polymer 1988, 29, 1807.
38. Yukioka, S.; Nagato, K.; Inoue, T. Polymer 1992, 33, 1171.
39. Felix, J. M.; Gatenholm, P. Am Chem Soc Polym Mater Sci Eng Div Proc 1992, 67.
40. Gatenholm, P.; Felix, J. M. In New Advances in Polyolefins; Chung, T. C., Ed.; Plenum: New York, 1993; p 237.
41. Dedecker, K.; Groeninck, G. Polymer 1998, 39, 4985.
42. Thomas, S.; Prud'homme, R. E. Polymer 1992, 33, 4260.
43. Willis, J. M.; Favis, B. D. Polym Eng Sci 1990, 30, 1073.
44. Cinaga, P.; Favis, B. D.; Jerome, R. J Polym Sci Part B: Polym Phys 1996, 34, 1691.
45. Kim, S. J. K.; Kim, S.; Park, C. E. Polymer 1997, 38, 2155.
46. Fayt, R.; Jerome, R.; Teyssie, P. Polym Eng Sci 1987, 27, 328.
47. Quin, C.; Yin, J.; Huang, B. Polymer 1990, 31, 663.
48. Noolandi, J. Polym Eng Sci 1984, 24, 70.
49. Noolandi, J.; Hong, K. M. Macromolecules 1982, 15, 482.
50. Noolandi, J.; Hong, K. M. Macromolecules 1984, 17, 1531.
51. Taylor, G. I. Proc R Soc London Ser A 1932, 138, 41.
52. Taylor, G. I. Proc R Soc London Ser A 1934, 146, 501.
53. Tang, T.; Huang, B. Polymer 1994, 35, 281.
54. Jannasch, P.; Wesslen, B. J Appl Polym Sci 1995, 58, 753.
55. Paul, D. R.; Newman, S. Polymer Blends; Academic: New York, 1978; Chapter 12.
56. Noolandi, J. Private communications; 1987, 129.
57. Wu, S. Polym Eng Sci 1987, 27, 335.