Axisymmetric slump and spreading of cohesive plastic soft materials: A yield stress measurement by consisto-rheometry

Journal of Rheology

Volumn 49, Issue 6, 2005, Pages 1253-1276

  Piau, Jean Michel ^a  

^a UNIV GRENOBLE ALPES   (France)

Author keywords

Soft materials; Yield stress

Indexed keywords

EMPIRICAL CONSISTOMETRY; SHALLOW WATER THEORY; SLUMP REGIME; SLUMP TESTS;

EQUATIONS OF MOTION; FLOW OF SOLIDS; FLUID MECHANICS; ONE DIMENSIONAL; RHEOMETERS; YIELD STRESS;

PLASTIC PRODUCTS;

EID: 33646511258     PISSN: 01486055     EISSN: None     Source Type: Journal    
DOI: 10.1122/1.2048747     Document Type: Article

References (25)

1. Chamberlain, J. A., J. E. Sader, K. A. Landman, and L. R. White, " Incipient plane-strain failure of a rectangular block under gravity., " Int. J. Mech. Sci. 43, 793-815 (2001).
2. Chamberlain, J. A., J. E. Sader, K. A. Landman, D. J. Horrobin, and L. R. White, " Incipient failure of a circular cylinder under gravity., " Int. J. Mech. Sci. 44, 1779-1800 (2002).
3. Chamberlain, J. A., S. Clayton, K. A. Landman, and J. E. Sader, " Experimental validation of incipient failure of yield stress materials under gravitational loading., " J. Rheol. 47 (6), 1317-1329 (2003).
4. Christensen, G., " Modeling the flow of fresh concrete: the slump test., " PhD Thesis, Princeton University (1991).
5. Clayton, S., T. G. Grice, and D. V. Boger, " Analysis of the slump test for on-site yield stress measurement of mineral suspensions., " Int. J. Min. Process. 70, 3-21 (2003).
6. Davidson, M. R., N. H. Khan, and Y. L. Yeow, " Collapse of a cylinder of Bingham fluid., " Journal of Australian and New Zealand Industrial and Applied Mathematics., 42 (E), C499-C517 (2000).
7. Debiane, K., and J.-M. Piau, " Dam-break flow of a viscoplastic material., " Les Cahiers de Rh́ologie. 18, 45-54 (2001).
8. de Buhan, P., L. Dormieux, and S. Maghous, " Stability of a vertical cut-off: improvement of the kinematic approach., " C.R. Acad. Sci. Paris, t.. 317, Śrie II, 131-136 (1993).
9. Magnin, A., and J.-M. Piau, " Cone and plate rheometry of yield stress fluids. Study of an aqueous gel., " J. Non-Newtonian Fluid Mech. 36, 85-108 (1990).
10. Magnin, A., and J.-M. Piau, " Flow of yield stress fluids through a sudden change of section., " Theoretical and Applied Rheology, Proc. XIth Int. Congr. on Rheology (, P. Moldenaers, and, R. Keunings, ed.) Vol. 1, 195-197, (Elsevier Science Publishers B.V., Amsterdam, 1992).
11. Murata, J., " Flow and deformation of fresh concrete., " Mater. Constr. (Paris) 17, 117-129 (1984).
12. Papanastasiou, T. C., " Flow of materials with yield., " J. Rheol. 31 (5), 385-404 (1987).
13. Pashias, N., D. V. Boger, J. Summers, and D. J. Glenister, " A fifty cent rheometer for yield stress measurement., " J. Rheol. 40 (6), 1179-1189 (1996).
14. Pastor, J., " Limit-analysis: numerical determination of complete static solutions. Application to the vertical cut-off., " J. Ḿc. Appl.. 2, no. 2, 167-196 (1978).
15. Philipponat, G., and B. Hubert, Fondations et ouvrages en terre (Eyrolles, Paris, 1997).
16. Piau, J.-M., " Flow of a yield stress fluid in a long domain. Application to flow on an inclined plane., " J. Rheol. 40 (4), 711-723 (1996).
17. Piau, J. M., " Crucial Elements of Yield Stress Fluid Rheology., " in Dynamics of Complex Fluids, edited by, M. J. Adams, R. A. Mashelkar, J. R. A. Pearson, and, A. R. Rennie, pp. 351-371 (Imperial College Press-The Royal Society, 1998).
18. Piau, J.-M., " Viscoplastic boundary layer., " J. Non-Newtonian Fluid Mech. 102, 193-218 (2002).
19. Piau, J.-M., and K. Debiane, " The adhesive or slippery flat plate viscoplastic boundary layer for a shear-thinning power-law viscosity., " J. Non-Newtonian Fluid Mech. 117, 97-107 (2004).
20. Piau, J.-M., and K. Debiane, " Consistometers rheometry of power-law viscous fluids., " J. Non-Newtonian Fluid Mech. 127, 213-224 (2005).
21. Rajani, B., and N. Morgenstern, " On the yield stress of geotechnical materials from the slump test., " Can. Geotech. J. 28, 457-462 (1991).
22. Roussel, N., and P. Coussot, " "Fifty-cent rheometer" for yield-stress measurements: from slump to spreading flow., " J. Rheol. 49 (3), 705-718 (2005).
23. Saak, A., H. Jennings, and S. Shah, " A generalized approach for the determination of yield stress by slump and slump flow., " Cem. Concr. Res. 34 (3), 363-371 (2004).
24. Schowalter, W. R., and G. Christensen, " Toward a rationalization of the slump test for fresh concrete: Comparisons of calculations and Experiments., " J. Rheol. 42, 865-870 (1998).
25. Tanigawa, Y., and H. Mori, " Analytical study on deformation of fresh concrete., " J. Eng. Mech. 115 (3), 493-508 (1989).