-
1
-
-
0037065198
-
Temperature-programmed adsorption and characteristics of honeycomb hydrocarbon adsorber
-
Jung, K. D.; Won, K. J. Temperature-programmed adsorption and characteristics of honeycomb hydrocarbon adsorber. Ind. Eng. Chem. Res. 2002, 45, 6589.
-
(2002)
Ind. Eng. Chem. Res.
, vol.45
, pp. 6589
-
-
Jung, K.D.1
Won, K.J.2
-
2
-
-
0035623910
-
Adsorption Characteristics of HCA (hydrocarbon absorber) catalysts for hydrocarbon and NO, removal under cold-start engine conditions
-
Seo, H.-K.; Oh, J.-W.; Sung, S.-C.; Choung, J.-Y. Adsorption Characteristics of HCA (Hydrocarbon Absorber) Catalysts for Hydrocarbon and NO, Removal under Cold-Start Engine Conditions. Korean J. Chem. Eng. 2001, 18, 698.
-
(2001)
Korean J. Chem. Eng.
, vol.18
, pp. 698
-
-
Seo, H.-K.1
Oh, J.-W.2
Sung, S.-C.3
Choung, J.-Y.4
-
3
-
-
0042236500
-
Hydroisomerization of a hydrocarbon feed containing n-hexane, n-heptane and cyclohexane on zeolite-supported platinum catalysts
-
Cesar, J.; Fransisco, R. Hydroisomerization of a hydrocarbon feed containing n-hexane, n-heptane and cyclohexane on zeolite-supported platinum catalysts. Appl. Catal., A 2003, 249, 175.
-
(2003)
Appl. Catal., A
, vol.249
, pp. 175
-
-
Cesar, J.1
Fransisco, R.2
-
4
-
-
85072502294
-
Observation of soot accumulation conditions in diesel paniculate filter and gas flow analysis
-
2002-01-1013
-
Nagata, M. Observation of soot accumulation conditions in diesel paniculate filter and gas flow analysis. SAE Tech. Pap. 2002, 2002-01-1013.
-
(2002)
SAE Tech. Pap.
-
-
Nagata, M.1
-
5
-
-
85072485976
-
Hydrocarbon adsorbers for reducing cold start emissions
-
2000-01-3094
-
Corbo, P.; Migliardini, F.; Caputo, D.; Iucolano, F.; Colella, C. Hydrocarbon adsorbers for reducing cold start emissions. SAE Tech. Pap. 2000, 2000-01-3094.
-
(2000)
SAE Tech. Pap.
-
-
Corbo, P.1
Migliardini, F.2
Caputo, D.3
Iucolano, F.4
Colella, C.5
-
6
-
-
85072465316
-
In-line hydrocarbon (HC) adsorber system for reducing cold-start emission
-
2000-01-0892
-
Yamamoto, S.; Matsushita, K.; Etoh, S.; Takaya, M. In-line hydrocarbon (HC) adsorber system for reducing cold-start emission. SAE Tech. Pap. 2000, 2000-01-0892.
-
(2000)
SAE Tech. Pap.
-
-
Yamamoto, S.1
Matsushita, K.2
Etoh, S.3
Takaya, M.4
-
7
-
-
85072466952
-
Development of the automobile exhaust hydrocarbon adsorbent
-
2001-01-0660
-
Kanazawa, T.; Sakurai, K. Development of the automobile exhaust hydrocarbon adsorbent. SAE Tech. Pap. 2001, 2001-01-0660.
-
(2001)
SAE Tech. Pap.
-
-
Kanazawa, T.1
Sakurai, K.2
-
8
-
-
85072490186
-
Vehicle comparison of advanced three-way catalysts and hydrocarbon trap catalysts
-
2002-01-0730
-
Ballinger, T. H.; Anderson, P. J. Vehicle comparison of advanced three-way catalysts and hydrocarbon trap catalysts. SAE Tech. Pap. 2002, 2002-01-0730.
-
(2002)
SAE Tech. Pap.
-
-
Ballinger, T.H.1
Anderson, P.J.2
-
9
-
-
85072450163
-
Development of extruded electrically heated catalyst system for ULEV standards
-
Shimasaki, Y. Development of extruded electrically heated catalyst system for ULEV standards. SAE Tech. Pap. 1997, 97-1031.
-
(1997)
SAE Tech. Pap.
, vol.97
, Issue.1031
-
-
Shimasaki, Y.1
-
10
-
-
85072421406
-
A structurally durable EHC for the exhaust manifold
-
Mizuno, H.; Abe, F.; Hashimoto, S.; Kondo, T. A structurally durable EHC for the exhaust manifold. SAE Tech. Pap. 1994, 94-0466.
-
(1994)
SAE Tech. Pap.
, vol.94
, Issue.466
-
-
Mizuno, H.1
Abe, F.2
Hashimoto, S.3
Kondo, T.4
-
11
-
-
85072414697
-
High temperature durability of electrically heated extrude metal support
-
Reddy, K. P.; Gulati, S. T.; Lambert, D. W.; Schmidt, P. S.; Weise, D. S. High temperature durability of electrically heated extrude metal support. SAE Tech. Pap. 1994, 94-0782.
-
(1994)
SAE Tech. Pap.
, vol.94
, Issue.782
-
-
Reddy, K.P.1
Gulati, S.T.2
Lambert, D.W.3
Schmidt, P.S.4
Weise, D.S.5
-
12
-
-
85072447042
-
Fuel effects on emissions from an advance technology vehicle (Part 2)
-
Kubsh, J. E. Fuel effects on emissions from an advance technology vehicle (Part 2). SAE Tech. Pap. 1994, 94-1996.
-
(1994)
SAE Tech. Pap.
, vol.94
, Issue.1996
-
-
Kubsh, J.E.1
-
13
-
-
0042516776
-
Nickel incorporated into anodic porous alumina formed on an aluminium wire
-
Ohji, N.; Enomoto, N.; Mizushima, T.; Kakuta, M.; Morioka, Y.; Ueno, A. Nickel incorporated into Anodic Porous Alumina formed on an Aluminium Wire. J. Chem. Soc., Faraday Trans. 1994, 90, 1279.
-
(1994)
J. Chem. Soc., Faraday Trans.
, vol.90
, pp. 1279
-
-
Ohji, N.1
Enomoto, N.2
Mizushima, T.3
Kakuta, M.4
Morioka, Y.5
Ueno, A.6
-
14
-
-
0030489319
-
Preparation of an electrically heated wire catalyst for cold-start-exhaust
-
Nanba, T.; Takeishi, K.; Azuma, N.; Morioka, Y.; Ueno, A. Preparation of an Electrically Heated Wire Catalyst for Cold-Start-Exhaust. Chem. Lett. 1996, 493.
-
(1996)
Chem. Lett.
, pp. 493
-
-
Nanba, T.1
Takeishi, K.2
Azuma, N.3
Morioka, Y.4
Ueno, A.5
-
16
-
-
0012740947
-
-
Weast, R.C., Ed.; CRC Press: Boca Raton, FL
-
Weast, R.C., Ed. Handbook of Chemistry and Physics; CRC Press: Boca Raton, FL, 1980; Vol. 61, p E-69.
-
(1980)
Handbook of Chemistry and Physics
, vol.61
-
-
-
17
-
-
0001625180
-
Studies on active species for selective catalytic reduction on NO on alumina-supported cobalt oxide catalysts
-
Nanba, T.; Uemura, A.; Ueno, A.; Haneda, M.; Hamada, H.; Kakuta, N.; Miura, H.; Udagawa, Y. Studies on active species for selective catalytic reduction on NO on alumina-supported cobalt oxide catalysts. Bull. Chem. Soc. Jpn. 1998, 71, 2331.
-
(1998)
Bull. Chem. Soc. Jpn.
, vol.71
, pp. 2331
-
-
Nanba, T.1
Uemura, A.2
Ueno, A.3
Haneda, M.4
Hamada, H.5
Kakuta, N.6
Miura, H.7
Udagawa, Y.8
-
18
-
-
0038522582
-
6 in lean conditions
-
6 in lean conditions. Appl. Catal., A 2003, 245, 167.
-
(2003)
Appl. Catal., A
, vol.245
, pp. 167
-
-
Liotta, L.F.1
Pantaleo, G.2
Macaluso, A.3
Carlo, G.D.4
Deganello, G.5
-
19
-
-
0035842422
-
Low-temperature CO oxidation over platinum and cobalt oxide catalysts
-
Thormahlen, P.; Skoglundh, M.; Fridell, E.; Andersson, B. Low-temperature CO oxidation over platinum and cobalt oxide catalysts. J. Catal. 1999, 188, 300.
-
(1999)
J. Catal.
, vol.188
, pp. 300
-
-
Thormahlen, P.1
Skoglundh, M.2
Fridell, E.3
Andersson, B.4
-
20
-
-
17344373297
-
2 composite catalysts for methane combustion-correlation between morphology reduction properties and catalytic activity
-
2 composite catalysts for methane combustion-correlation between morphology reduction properties and catalytic activity. Catal. Commun. 2005, 6, 329.
-
(2005)
Catal. Commun.
, vol.6
, pp. 329
-
-
Liotta, L.F.1
Carlo, G.D.2
Pantaleo, G.3
Deganello, G.4
-
22
-
-
0036026684
-
4 in low-temperature CO oxidation
-
4 in low-temperature CO oxidation. J. Catal. 2002, 211, 387.
-
(2002)
J. Catal.
, vol.211
, pp. 387
-
-
Jansson, J.1
Palqvist, A.E.C.2
Fridell, E.3
Skoglundh, M.4
Osterlund, L.5
Thormahlen, P.6
Lange, V.7
-
23
-
-
85072430152
-
Ultralow power electrically heated catalyst system
-
Kuper, P. F.; Maus, W.; Swars, H.; Bruck, R.; Kaiser, F. W. Ultralow power electrically heated catalyst system. SAE Tech. Pap. 1994, 94-0465.
-
(1994)
SAE Tech. Pap.
, vol.94
, Issue.465
-
-
Kuper, P.F.1
Maus, W.2
Swars, H.3
Bruck, R.4
Kaiser, F.W.5
-
24
-
-
85072446599
-
Alternative EHC heating patterns and their impact on cold-start emissions performance
-
Kubsh, J. E. Alternative EHC heating patterns and their impact on cold-start emissions performance. SAE Tech. Pap. 1994, 94-1996.
-
(1994)
SAE Tech. Pap.
, vol.94
, Issue.1996
-
-
Kubsh, J.E.1
-
25
-
-
0013531678
-
Oxidation of CO and hydrocarbons over noble metal catalysts
-
Yao, Y.-F. Oxidation of CO and hydrocarbons over noble metal catalysts. J. Catal. 1984, 87, 152.
-
(1984)
J. Catal.
, vol.87
, pp. 152
-
-
Yao, Y.-F.1
-
27
-
-
0032489562
-
4
-
4. Appl. Catal, B 1998, 16, 43.
-
(1998)
Appl. Catal, B
, vol.16
, pp. 43
-
-
Baldi, M.1
Finocchio, E.2
Milella, F.3
Busca, G.4
|