Defining the materials issues and research needs for ultra-supercritical steam turbines

Proceedings of the 4th International Conference on Advances in Materials Technology for Fossil Power Plants

Volumn 2005, Issue , 2005, Pages 602-620

  Maziasz, Philip J ^a   Wright, Ian G ^a   Shingledecker, John P ^a   Gibbons, Thomas B ^b   Romanosky, Robert R ^c  

^a OAK RIDGE NATIONAL LABORATORY   (United States)

^b National Energy Technology Laboratory ^*  (United States)

^c NATIONAL ENERGY TECHNOLOGY LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FERRITE; MARTENSITE; STEAM POWER PLANTS; STEEL; THERMAL EFFECTS;

MARTENSITIC-FERRITIC STEELS; NI-BASED SUPERALLOYS; PIPING ALLOYS; SUPERCRITICAL BOILER TUBING;

STEAM TURBINES;

EID: 33646183023     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (55)

1. J. White, "ASPEN analysis of supercritical steam cycle," Gilbert Commonwealth (1995).
2. N. Birks, "Selection of materials for advanced heat exchangers," report to Pittsburgh Energy Technology Center (1995).
3. C.W. Elston and R. Sheppard, "First commercial supercritical pressure steam turbine built for Philo,"ASME paper No. 55-A-159 (1955).
4. C.B. Campbell, C.T. Frank, and J.C. Spaks, "The Eddystone superpressure unit," ASME paper No. 56-1-156 (1956).
5. R.I. Jaffee, EPRI, private communication (June, 1984).
6. I. Fruchtman, "Assessment of Supercritical Power Plant Performance," EPRI Rept. No. CS-4968 (1986).
7. R. Blum and J. Hald, "Benefit of Advanced Steam Power Plants," pp. 1009-1016 in Proc. Materials for Adv. Power Eng. 2002, J. Lecomte-Beckers, M. Carton, F. Schubert and P. J. Ennis, Eds, Forschungszentrum Mich GmbH (2002).
8. K. Miyashita, "Overview of advanced steam plant development in Japan" pp. 17-30 in Proc. Inst. Mech. Eng. Conf. Advanced Steam Plant, London (1997).
9. R.I. Jaffee, "Advanced pulverized coal power plant development," EPRI Project No. 1403-4, Final Report (1984).
10. P.D. Clarke, P.F. Morris, N. Cardinal, and M.J. Worrall, "Factors influencing the creep resistance of martensitic alloys for advanced power plant applications," pp. 333-345 in Parsons 2003: Engineering Issues in Turbine Machinery, Power Plant and Renewables, A. Strang, R.D. Conroy, W.M. Banks, M. Blackler, J. Leggett, G.M. McColvin, S. Simpson, M. Smith, F. Starr, and R. W. Vanstone, Eds., Maney for the Inst, of Materials, Minerals, and Mining (2003).
11. See, for instance, R. Viswanathan and W.T. Bakker, "Materials for ultra-supercritical fossil power plants," EPRI Report No. TR-114750 (2000).
12. A. Kaplan and M. Miyazaki, "Advanced 12Cr steel for high-temperature rotors," presented at the First EPRI Intl. Conf. on Improved Coal-Fired Power Plants (1986).
13. O. Watanabe and S. Ganesh, "High-purity NiCrMoV steel for low-pressure rotors," First EPRI Intl. Conf. on Improved Coal-fired Power Plants ibid.
14. K.-H. Mayer and H. Konig, "High-temperature bolting," First EPRI Intl. Conf. on Improved Coal-fired Power Plants ibid.
15. K.-H. Mayer and W. Gysel, "Cast components," First EPRI Intl. Conf. on Improved Coal-fired Power Plants ibid.
16. A.F. Armor and G.T. Preston, "A study of coal-fired power plants in Japan," American Power Conference, 47, 72-80 (1985).
17. K. Muramatsu, "Development of ultra-supercritical plant in Japan," pp. 543-559 in Advanced Heat-Resistant Steel for Power Generation, R. Viswanathan and J. Nutting, Eds., IOM Communications ltd., Book No. 708 (1999).
18. F. Masuyama, "History of power plants and progress in heat-resistant steels," ISJI International, 41 (6), 612-625 (2001).
19. R. Viswanathan and W.T. Bakker, "Materials for ultra-supercritical coal power plantsturbine materials: Part II," J. Materials Engineering and Performance, 10 (1), 96-101 (2001).
20. See, for instance, Materials for Advanced Power Engineering 1998, J. Lecomte-Beckers, F. Schubert, and P.J. Ennis, Eds., Forschungszentrum Juelich GmbH, Germany (1998).
21. st Century Turbine and Power Plants, A. Strang, w.M. Banks, R.D. Conroy, G.M. McColvin, J.C. Neal, and S. Simpson, Eds. IOM Communications, Ltd., London, Book 736 (2000).
22. st Century Turbine and Power Plants ibid, pp. 1825-1839.
23. P. Busquin, "Energy research in the sixth Framework Programme," pp. 1801-1806 in Proc. Materials for Adv. Power Eng. 2002, J. Lecomte-Beckers, M. Carton, F. Schubert and P. J. Ennis, Eds., Forschungszentrum Mich GmbH (2002).
24. E. Shuster and S. Klara, "Tracking new coal-fired power plants," www.netl.doe.gov/coalpower/index.html (2004)
25. Clean Coal Technology Roadmap "CURC/EPRI/DOE Consensus Roadmap," National Energy Technology Laboratory http://www.netl.doe.gov/ coalpower/ccpi/index.html, January 2004.
26. th International Technical Conference on Coal Utilization & Fuel Systems. April 18-23, 2004. Clearwater, Fl. Coal Technology Association, 610 Suffield Dr., Gaithersburg, MD 20878.
27. Viswanathan, R. Purgert, U. Rao. "Materials for Ultra-Supercritical Coal-Fired Power Plant Boilers." Materials for Advanced Power Engineering 2002, Proceedings Part II. Forschungszentrum Julich GmbH, 2002. 1109-1129R.
28. th Intl. Technical Conference on Coal Utilization & Fuel Systems, National Energy Technology Laboratory (2004).
29. R. Blum and R.W. Vanstone. "Materials Development for Boilers and Steam Turbines Operating at 700°C." Parsons 2003 - Proceedings of the Sixth International Charles Parsons Turbine Conference, Institute of Materials, Minerals, and Mining, London, 2003. 489-510.
30. th Intl. Technical Conference on Coal Utilization & Fuel Systems, National Energy Technology Laboratory (2004).
31. th Intl. Technical Conference on Coal Utilization & Fuel Systems. National Energy Technology Laboratory (2004).
32. 2 1200°F Unit No. 1," paper No. 10, pp. 7-11 to 7-20 in Proc. Joint International Conference on Creep, The Institution of Mechanical Engineers, London (1963).
33. H. G. Chamberlain, "The Eddystone experience: an overview of experience in the first twenty-four years," presented at the EPRI Advanced Pulverized Coal Power Plant Utility Advisory Committee Meeting, Washington, D.C., July 1983.
34. J. Kure-Jensen, A. Morson, and P. Schilke, "Large steam turbines for advanced steam conditions," in Vol. 1 of Proc. EPRI Intl. Symp. on Improved Technology for Fossil Power Plants-New and Retrofit Applications (1993).
35. T.E. Duffy and C. Knox, "Topping systems for repowering coal-fueled plants," presented at the Third EPRI International Conference on Improved Power Plants (ICPP)," San Francisco, California (1991).
36. F. Abe, T. Horiuchi, M. Taneike, and S. Sawada, "Improvement of creep strength by boron and nano-size nitrides for tempered martensitic 9Cr-3W-3Co-Vnb steel at 650°C," pp. 389-396 in Parsons 2003: Engineering Issues in Turbine Machinery, Power Plant and Renewables, A. Strang, R.D. Conroy, W.M. Banks, M. Blackler, J. Leggett, G.M. McColvin, S. Simpson, M. Smith, F. Starr, and R.W. Vanstone, Eds., Maney for the Inst, of Materials, Minerals, and Mining (2003).
37. S. Muneki, H. Okubo, H. Okada, M. Igarashi, and F. Abe, "A study of new carbon-free martensitic alloys with superior creep properties at elevated temperatures over 973 K" Parsons 2003: Engineering Issues in Turbine Machinery, Power Plant and Renewables ibid, pp. 570-582.
38. Work in progress at the Oak Ridge National Laboratory (2004).
39. J. A. Rakowski, C.P. Stinner, M. Lipschutz and J.P. Montague, "The Use and Performance of Oxidation and Creep-Resistant Stainless Steels in an Exhaust Gas Primary Surface Recuperator Application," paper GT2004-53917 in Proc. ASME Turbo Expo 2004, ASME, New York, NY.
40. B. Seth, "U.S. developments in advanced steam turbine materials," pp. 519-542 in Advanced Heat-Resistant Steel for Power Generation, R. Viswanathan and J. Nutting, Eds., IOM Communications Ltd., Book No. 708 (1999).
41. M.E. Staubli, K.-H. Mayer, T.U. Kern, and R.W. Vanstone, "COST 501-522: The European collaboration in advanced steam turbine materials for ultra-efficient, low-emissions steam power plant," pp. 98-122 in Proc. 5th International Charles Parsons Turbine Conference: Parsons 2000 Advanced Materials for 21st Century Turbine and Power Plants, A. Strang, W.M. Banks, R.D. Conroy, G.M. McColvin, J.C. Neal, and S. Simpson, Eds., IOM Communications, Ltd., London, Book 736 (2000).
42. K.-H. Mayer, T.U. Kern, M.E. Staubli, and E. Tolksdorf, "Long-term investigation of specimens of 24 production components manufactured from advanced martensitic 10%Cr steels for 600°C turbines," ibid, pp. 372-385.
43. R. Blum and R.W. Vanstone, "Materials development for boilers and steam turbines operating at 700°C," pp. 489-510 in Parsons 2003: Engineering Issues in Turbine Machinery, Power Plant and Renewables, A. Strang, R.D. Conroy, W.M. Banks, M. Blackler, J. Leggett, G.M. McColvin, S. Simpson, M. Smith, F. Starr, and R.W. Vanstone, Eds., Maney for the Inst. of Materials, Minerals, and Mining (2003).
44. R. Knödler and B. Scarlin, "Oxidation of advanced ferritic/martensitic steels and of coatings in flowing steam at 650°C," pp. 1601-1611 in Proc. Materials for Adv. Power Eng. 2002, J. Lecomte-Beckers, M. Carton, F. Schubert and P. J. Ennis, Eds., Forschungszentrum Mich GmbH (2002).
45. P.J. Maziasz and M. Pollard, "High-temperature cast stainless steel," Advanced Materials & Processes, 161 (10), 57 (2003).
46. See, for instance, Advanced Heat-Resistant Steel for Power Generation, R. Viswanathan and J. Nutting, Eds., IOM Communications Ltd., Book No. 708 (1999).
47. K.-H. Mayer, "New materials for advanced steam turbines," Vol. 5 of Survey of Superalloy Bolt Failures in High-temperature Service, EPRI Report No. TR100979 (1992).
48. R.L. Kennedy, W.D. Cao, T.D. Bayha, and R. Jenisku, "Developments in Wrought Nb Containing Superalloys (718+100°F)," Superalloys 2003, TMS, Warrendale, PA (2003).
49. W.D. Cao and R.L. Kennedy, "Role of Chemistry in 718-Type Alloys - AllVAC 718Plus Alloy Development," Superalloys 2004, TMS, Warrendale, PA (2004).
50. K. Hidaka, M. Shiga, S. Nakamura, Y. Fukui, N. Shimizu, R. Kaneko, Y. Watanabe, and T. Fujita, "Development of 12Cr steel for 650°C USC steam turbine rotors," pp. 281-290 in Materials for Advanced Power Engineering 1994, D. Coutsouradis, J.H. Davidson, J. Ewald, P. Greenfield, T. Khan, M. Malik, D.B. Meadowcroft, V. Regis, R.B. Scarlin, F. Schubert, and D.V. Thornton, Eds., Kluwer Academic Publishers (1994).
51. D.V. Thornton and K.-H. Meyer, "European high-temperature materials development for advanced steam turbine," Materials for Advanced Power Engineering 1994 ibid, pp. 349-364.
52. M. Miyazaki, M. Yamada, Y. Tsuda and R. Ishii, "Advanced Heat-Resistant Steels for Steam Turbines," Materials for Advanced Power Engineering 1994 ibid., pp. 574-585.
53. J.R. DiStefano, J.H. DeVan, and L.C. Fuller, "Assessment of Materials Requirements for Advanced Steam Cycle Systems (>1100°F)," ORNL Report No. TM-10489 (1988).
54. B.A. Pint and J.M. Rakowski, "Effect of Water Vapor on the Oxidation Resistance of Stainless Steels," Paper No.00259, presented at NACE/Corrosion 2000, Orlando, FL; NACE, Houston, TX (2000).
55. D.A. Woodford, "Test Methods for Accelerated Development, Design, and Life Assessment of High Temperature Materials," Materials and Design, 14 (4), 231 (1993).