Towards an effective approach to reduce manufacturing environmental burdens via process planning

American Society of Mechanical Engineers, Manufacturing Engineering Division, MED

Volumn 16-1, Issue , 2005, Pages 37-48

  Román, Felipe ^a   Bras, Bert ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

CAPP; ECDM; Environmental process model templates; Environmentally Conscious Design and Manufacturing; Variant Computer Aided Process Planning

Indexed keywords

CONSCIOUS DECISIONS; ENVIRONMENTAL PROCESS MODEL TEMPLATES; ENVIRONMENTALLY CONSCIOUS DESIGN AND MANUFACTURING ( ECDM); VARIANT COMPUTER AIDED PROCESS PLANNING (CAPP);

COMPUTER AIDED ANALYSIS; DECISION MAKING; ENVIRONMENTAL PROTECTION; INFORMATION ANALYSIS; MATHEMATICAL MODELS; PROBLEM SOLVING;

PROCESS CONTROL;

EID: 33646001073     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE2005-81462     Document Type: Conference Paper

References (66)

1. Åkermark, A.-M., 1999, "Design for Environment from the Designer's Perspective," in Proceedings of the 1999 IEEE International Symposium on Electronics and the Environment, pp. 47-50.
2. st International Symposium on Environmentally Conscious Design and Inverse Manufacturing 1999, IEEE, pp. 329-333.
3. Bras, B., 1997, "Incorporating Environmental Issues in Product Design and Realization," Industry and Environment, 20(1-2), pp. 7-13.
4. rd International Symposium on Environmentally Conscious Design and Inverse Manufacturing, IEEE Tokyo, Japan, pp. 124-131.
5. Handfield, R.B., S.A. Melnyk, R.J. Calantone, and S. Curkovic, 2001, "Integrating Environmental Concerns into the Design Process: The Gap between Theory and Practice," IEEE Transactions on Engineering Management, 48(2), pp. 189-208.
6. Keoleian, G.A., 1998, "Is Environmental Improvement in Automotive Component Design Highly Constrained?" Journal of Industrial Ecology, 2(2), pp. 103-118.
7. Lindahl, M., 2004, "Designers' utilization of DfE methods," in Proceedings 2004 IEEE International Engineering Management Conference, IEEE, 3, pp. 903-907.
8. st International Symposium on Environmentally Conscious Design and Inverse Manufacturing 1999, IEEE, pp. 334-337.
9. Ries, G., R. Winkler, and R. Züst, 1999, "Barriers for a Successful Integration of Environmental Aspects in Product Design," in Proceedings of the 1999 IEEE International Symposium on Electronics and the Environment, pp. 527-532.
10. Kalyan-Seshu, U.-S. and B. Bras, 1998, "Integrating DFX Tools with Computer-Aided Design Systems," in Proceedings of DETC 98 ASME Design Engineering Technical Conferences September 13-16, 1998, Atlanta, GA, pp. 1-12.
11. Amini, N., B.C. Rosén, and H. Westberg, 1998, "Optimization of Gear Tooth Surfaces," International Journal of Machine Tools & Manufacture, 38(5-6), pp. 425-435.
12. Byrne, G. and E. Scholta, 1993, "Environmentally Clean Machining Processes - A Strategic Approach," in Annals of the CIRP, 42, pp. 471-474.
13. Cattanach, R.E., J.M. Holdreith, D.P. Reinke, and L.K. Sibik, 1995, The Handbook of Environmentally-Conscious Manufacturing - From Design and Production to Labeling and Recycling, IRWIN Professional Publishing.
14. Sheng, P.S., D. Dornfeld, and P. Worhach, 1995, "Integration Issues in "Green" Design and Manufacturing," Manufacturing Review, 8(2), pp. 95-105.
15. nd ed, Prentice Hall.
16. nd ed, Prentice Hall.
17. Singh, N., 1996, Systems Approach to Computer-Integrated Design and Manufacturing, Wiley.
18. Elinson, A., J.W. Herrmann, I.E. Minis, D.S. Nau, and G. Singh, 1997, "Toward Hybrid Variant/Generative Process Planning," in Proceedings of DETC'97:1997 ASME Design Engineering Technical Conferences, Sacramento, California, pp. 1-11.
19. Dornfeld, D., P.K. Wright, F.-C. Wang, and P. Sheng, 1999, "Multi-Agent Process Planning for a Networked Machining Service," in Transactions of NAMRI/SME, 21, pp. 191-196.
20. Krishnan, N. and P.S. Sheng, 2000, "Environmental versus Conventional Planning for Machined Components," in Annals of the CIRP, 49, pp. 363-366.
21. Sheng, P.S. and M. Srinivasan, 1995, "Multi-Objective Process Planning in Environmentally Conscious Manufacturing: A Feature-Based Approach," in Annals of CIRP, 44, pp. 433-437.
22. Sheng, P.S. and M. Srinivasan, 1996a, "Hierarchical Part Planning Strategy for Environmentally Conscious Machining," in Annals of the CIRP, 45, pp. 455-460.
23. Sheng, P.S. and M. Srinivasan, 1996b, "Green Agents for Distributed Manufacturing," in Japan/USA Symposium on Flexible Automation, ASME, 2, pp. 1111-1118.
24. Srinivasan, M. and P. Sheng, 1997, "Uncertainty Effects in Process Planning for Environmentally Conscious Machining," in Transactions of NAMRI/SME, 25, pp. 237-242.
25. Srinivasan, M. and P. Sheng, 1999a, "Feature-based process planning for environmentally conscious machining - Part 1: microplanning," Robotics and Computer-Integrated Manufacturing, 15, pp. 257-270.
26. Srinivasan, M. and P. Sheng, 1999b, "Feature based process planning in environmentally conscious machining - Part 2: macroplanning," Robotics and Computer-Integrated Manufacturing, 15, pp. 271-281.
27. Bauer, D. and P.S. Sheng, 1997, "Interaction of Process Mechanisms and Environmental Effects in Secondary Finishing," in 1997 ASME International Mechanical Engineering Congress and Exposition, Concurrent Product Design and Environmentally Conscious Manufacturing MED, S.B. Billatos and H.C. Zhang, ASME, 5, pp. 283-294.
28. Bauer, D., S. Thurwachter, and P. Sheng, 1998, "Integration of Environmental Factors in Surface Planning Part 1 - Mass and Energy Modeling," in Transactions of NAMRI/SME, 26, pp. 171-176.
29. Mao, Z., D. Bauer, and P.S. Sheng, 1999, "The Role of Environmental Impact in Surface Specification During the Design Process - A Mechanistic Study," in Proceedings 6th International Seminar on Life Cycle Engineering, CIRP Kingston, Ontario, Canada, pp. 161-169.
30. Thurwachter, S., D. Bauer, and P. Sheng, 1998, "Integration of Environmental Factors in Surface Planning Part 2 - Multi-Criteria Hazard Evaluation," in Transactions of NAMRI/SME, 26, pp. 165-170.
31. Jain, N.K. and V.K. Jain, 2003, "Process Selection Methodology for Advanced Machining Processes," Journal of Advanced Manufacturing Systems, 2(1), pp. 5-45.
32. Yeo, S.H. and A.K. New, 1999, "A Method for Green Process Planning in Electric Discharge Machining," International Journal of Advanced Manufacturing Technology, 15, pp. 287-291.
33. Cao, H., F. Liu, P. Van, and H. Zhang, 2003-04, "A Decision-Making Framework Model of Machining Process Planning for Green Manufacturing and Its Application," International Journal of Environmentally Conscious Design and Manufacturing, 11(4), pp. 20-27.
34. Munoz, A.A. and P. Sheng, 1995, "An analytical approach for determining the environmental impact of machining processes," Journal of Materials Processing Technology, 53, pp. 736-758.
35. Dahmus, J.B. and T.G Gutowski, 2004, "An Environmental Analysis of Machining," in Proceedings of IMECE2004: 2004 ASME International Mechanical Engineering Congress and RD&D Expo, ASME Anaheim, California, USA, pp. 1-10.
36. EPA, 2002, "Greening Your Products: Good for the environment, good for your bottom line," U.S. Office of Pollution Prevention and Toxics, pp. 1-45.
37. Pojasek, R.B., 1997, "Understanding a Process with Process Mapping," in Practical Pollution Prevention, p. 91-101.
38. Sutherland, J.W. and K.L. Gunter, 2001, "Environmental Attributes of Manufacturing Processes," in Handbook of Environmentally Conscious Manufacturing, C.N. Madu, Kluwer Academic Publishers, pp. 293-316.
39. Choi, A.C.K., H. Kaebernick, and W.H. Lai, 1997, "Manufacturing Processes Modelling for Environmental Impact Assessment," Journal of Materials Processing Technology, 70, pp. 231-238.
40. Xue, H., A. Filipovic, S.M. Pandit, J.W. Sutherland, and W.W. Olsen, 2000, "Using a Manufacturing Process Classification System for Improved Environmental Performance," Society of Automotive Engineers, pp. 23-30.
41. Wrisberg, N., H.A. Udo de Haes, U. Triebswetter, P. Eder, and R. Clift, 2002, Analytical Tools for Environmental Design and Management in a Systems Perspective, Kluwer Academic Publishers.
42. Sheng, P.S. and E. Hertwich, 1998, "Indices for Comparative Waste Assessment in Environmentally-Conscious Manufacturing," Journal of Manufacturing Science and Engineering, 120, pp. 129-140.
43. Ford, 2002, "2002 Corporate Citizenship Report, Our Principles, Progress and Performance," Ford Motor Company, pp. 1-76.
44. GM, 2003, "Driving the Future Today - Corporate Responsibility and Sustainability Report, 2003," General Motors, pp. 1-133.
45. FRP, 2005, "Facility Reporting Project Sustainability Reporting Guidance - Pilot Draft -," Facility Reporting Project, pp. 31-36.
46. Atmadi, A., D.A. Stephenson, and S.Y. Liang, 2001, "Cutting Fluid Aerosol Generation from Splash in Turning: Analysis for Environmentally Conscious Machining," International Journal of Advanced Manufacturing Technology, 17, pp. 238-243.
47. Michalek, D.J., W.W.-S. Hii, J. Sun, K.L. Gunter, and J.W. Sutherland, 2003, "Experimental and Analytical Efforts to Characterize Cutting Fluid Mist Formation and Behavior in Machining," Applied Occupational and Environmental Hygiene, 18, pp. 842-854.
48. Sun, J., C. Ju, Y. Yue, K.L. Gunter, D.J. Michalek, and J.W. Sutherland, 2004, "Character and Behavior of Mist Generated by Application of Cutting Fluid to a Rotating Cylindrical Workpiece, Part 2: Experimental Validation," Journal of Manufacturing Science and Engineering, 126, pp. 426-434.
49. Yue, Y., J. Sun, K.L. Gunter, D.J. Michalek, and J.W. Sutherland, 2004, "Character and Behavior of Mist Generated by Application of Cutting Fluid to a Rotating Cylindrical Workpiece, Part 1: Model Development," Journal of Manufacturing Science and Engineering, 126, pp. 417-425.
50. Brinksmeier, E., J. Eckebrecht, and H. Buhr, 1994, "Improving ecological aspects of the grinding process by effective waste mangament," Journal of Materials Processing Technology, 44, pp. 171-178.
51. Skerlos, S.J., R.E. DeVor, and S.G. Kapoor, 1998, "Environmentally Conscious Disposal Considerations in Cutting Fluid Selection," in Proceedings of the ASME: Manufacturing Science and Engineering Division, J. Lee, ASME International Mechancial Engineering Congress and Exposition Anaheim, CA, 8, pp. 397-403.
52. Bauer, D. and P.S. Sheng, 2000, "Integration of Functional and Environmental Performance Design Decisions," Journal of Industrial Ecology, 3(4), pp. 59-75.
53. Fitch, P. and J.S. Cooper, 2005, "Life-cycle modelling for adaptive and variant design. Part 1: Methodology," Research in Engineering Design, 15, pp. 216-228.
54. Basu, S. and J.W. Sutherland, 1999, "Multi-Objective Decision Making for Environmentally Responsible Manufacturing," in Proceedings 6th International Seminar on Life Cycle Engineering, CIRP Kingston, Ontario, Canada, pp. 323-331.
55. Wells, W.E., 1997, "Optimizing Designs for Quality and Environmentally Responsible Manufacturing," in 1997 ASME International Mechanical Engineering Congress and Exposition, In: Concurrent Product Design and Environmentally Conscious Manufacturing MED, S.B. Billatos and H.C. Zhang, ASME, 5, pp. 49-58.
56. Townsend, D.P., 1992, Dudley's Gear Handbook, Second Edition ed, McGraw-Hill.
57. Dhar, N.R., S. Paul, and A.B. Chattopadhyay, 2002, "Role of Cryogenic Cooling on Cutting Temperature in Turning Steel," Transactions of the ASME, 124, pp. 146-154.
58. Hong, S.Y., 2001, "Economical and Ecological Cryogenic Machining," Journal of Manufacturing Science and Engineering, 123, pp. 331-338.
59. Liu, J., R. Han, and Y. Sun, 2005, "Research on experiments and action mechanism with water vapor as coolant and lubricant in Green cutting," International Journal of Machine Tools & Manufacture, 45, pp. 687-694.
60. Paul, S. and A.B. Chattopadhyay, 1995, "A Study of Effects of Cryo-Cooling in Grinding," International Journal of Machine Tools & Manufacture, 35(1), pp. 109-117.
61. Ramesh, K., S.H. Yeo, Z.W. Zhong, and H. Huang, 2003, "Ecological Grinding with Chilled Air as Coolant," Proceedings of the Institution of Mechanical Engineers (IMechE) - Part B - Journal of Engineering Manufacture, pp. 409-419.
62. Suzuki, K. and H. Isonami, 1999, "An Attempt of Dry Ice Jet Coolant in CBN Grinding," in Abrasive Technology: Current Development and Applications, I.J. Wang, W. Scott, and L. Zhang, World Scientific Publishing, pp. 400-403.
63. Yui, A. and M. Terashima, 1999, "Development of Coolant-Less Grinding System," in Abrasive Technology: Current Development and Applications, I.J. Wang, W. Scott, and L. Zhang, World Scientific Publishing, pp. 394-399.
64. Kalhan, S., S. Twining, R. Denis, R. Marano, and R. Messick, 1998, "Polymer Additives as Mist Suppressants in Metalworking Fluids Part IIa: Preliminary Laboratory and Plant Studies - Water-Soluble Fluids," in Design and Manufacture for the Environment, SAE, pp. 47-51.
65. Ward, P.P., "Plasma Cleaning Techniques and Future Applications in Environmentally Conscious Manufacturing," Sandia National Laboratories, Albuquerque, New Mexico, pp. 1-9.
66. Emblemsvåg, J. and B. Bras, 2001, Activity-Based Cost and Environmental Management - A Different Approach to the ISO 14000 Compliance, Kluwer Academic Publishers.