Hybrid systems in automotive electronics design

International Journal of Control

Volumn 79, Issue 5, 2006, Pages 375-394

  Balluchi, A ^a   Benvenuti, L ^b   Ferrari, A ^a   Sangiovanni Vincentelli, A L ^a,c  

^a PARADES   (Italy)

^b SAPIENZA UNIVERSITY OF ROME   (Italy)

^c UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALGORITHMS; CONTROL SYSTEMS; EMBEDDED SYSTEMS; MATHEMATICAL MODELS;

AUTOMOTIVE ELECTRONIC DESIGN; EMBEDDED CONTROL SYSTEMS; HYBRID SYSTEM TECHNIQUES;

AUTOMOBILE ELECTRONIC EQUIPMENT;

EID: 33645709611     PISSN: 00207179     EISSN: 13665820     Source Type: Journal    
DOI: 10.1080/00207170600587465     Document Type: Article

References (41)

1. A. Agostini, A. Balluchi, A. Bicchi, B. Piccoli, A.L. Sangiovanni-Vincentelli and K. Zadarnowska, "Randomized algorithms for platformbased design", in Proceedings of the 44th IEEE Conference on Decision and Control, and the European Control Conference 2005, Seville, Spain, December 2005, pp. 6638-6643.
2. M. Antoniotti, A. Balluchi, L. Benvenuti, A. Ferrari, C. Pinello, A.L. Sangiovanni-Vincentelli, R. Flora, W. Nesci, C. Rossi, G. Serra and M. Tabaro, "A top-down constraints-driven design methodology for powertrain control system", in Proceedings GPC-98, Global Powertrain Congress, volume Emissions, Testing and Controls, Detroit, Michigan, USA, October 1998, pp. 74-84.
3. K.E. Arzén, A. Cervin, J. Eker and L. Sha, "An introduction to control and scheduling co-design", in Proceedings of the 39th IEEE Conference on Decision and Control, Sydney, Australia, Vol. 5, pp.4865-4870, December 2000.
4. AUTOSAR, www.autosar.org (accessed 20 February 2006).
5. E.-H. Azibi and J.-C. Sardas, "Computer-aided process engineering and transformation of the process design activity in automotive industry", in Proceedings of the 2002 IEEE International Conference on Systems, Man and Cybernetics, Hammamet, Tunisia, October 2002, pp. 1-5.
6. M. Baleani, A. Ferrari, L. Mangeruca, A. Sangiovanni-Vincentelli, U. Freund, E. Schlenker and H.-J. Wolff, "Correct-by-construction transformations across design environments for model-based embedded software development", in Proceedings of the Design Automation and Test in Europe Conference, March 2005, pp. 1044-1049.
7. A. Balluchi, M.D. Di Benedetto, C. Pinello, C. Rossi and A.L. Sangiovanni-Vincentelli, "Hybrid control in automotive applications: the cut-off control", Automatica, 35, pp. 519-535, 1999.
8. A. Balluchi, L. Benvenuti, M.D. Di Benedetto, C. Pinello and A.L. Sangiovanni-Vincentelli, "Automotive engine control and hybrid systems: Challenges and opportunities", in Proceedings of the IEEE, 88, pp. 888-912, 2000.
9. A. Balluchi, L. Benvenuti, M.D. Di Benedetto and A.L. Sangiovanni-Vincentelli, "Design of observers for hybrid systems", in Hybrid Systems: Computation and Control, volume 2289 of Lecture Notes in Computer Science, C.J. Tomlin and J.R. Greenstreet, Eds, Stanford, CA: Springer-Verlag, 2002a, pp. 76-89.
10. A. Balluchi, L. Benvenuti, C. Lemma, P. Murrieri and A.L. Sangiovanni-Vincentelli, "Hybrid models of an automotive driveline", Tech. rep., PARADES, Rome, I, December 2004a.
11. A. Balluchi, M.D. Di Benedetto, A. Ferrari, G. Gaviani, G. Girasole, C. Grossi, W. Nesci, M. Pennesc and A.L. Sangiovanni- Vincentelli, "Design of a motorcycle engine control unit using an integrated control-implementation approach", in Proceedings 1st IFAC Workshop on "Advances in Automatic Control", Salerno, Italy, April 2004b, pp. 218-225.
12. A. Balluchi, L. Benvenuti, C. Lemma, A.L. Sangiovanni-Vincentelli and G. Serra, "Actual engaged gear identification: a hybrid observer approach", in Proceedings of the 16th IFAC World Congress, Prague, CZ, July 2005.
13. A. Balluchi, L. Berardi, M.D. Di Benedetto, A. Ferrari, G. Girasole and A.L. Sangiovanni-Vincentelli, "Integrated control implementation design", in Proceedings of the 41st IEEE Conference on Decision and Control, Las Vegas, NV, USA, December 2002b, pp. 1337-1342.
14. M. Baotic, M. Vasak, M. Morari and N. Peric, "Hybrid theory based optimal control of electronic throttle", in Proceedings of the IEEE American Control Conference, ACC 2003, Denver, Colorado, USA, June 2003, pp. 5209-5214.
15. M.B. Barron and W.F. Powers, "The role of electronic controls for future automotive mechatronic systems", IEEE/ASME Transactions on Mechatronics, 1, pp. 80-88, 1996.
16. A. Bemporad, A. Garulli, S. Paoletti and A. Vicino, "A bounded-error approach to piecewise affine system identification", IEEE Trans. Automatic Control, 50, pp. 1567-1580, 2004a.
17. A. Bemporad, M. Morari and N.L. Ricker, Model Predictive Control Toolbox for Matlab - Users Guide, The Mathworks, Inc., 2004b. http://www.mathworks.com/ access/helpdesk/help/toolbox/mpc/
18. A. Bemporad, G. Bianchini, F. Brogi and F. Barbagli, "Passivity analysis and passification of discrete-time hybrid systems", in Proceedings IFAC World Congress, Prague, Czech Republic, 2005.
19. K.R. Butts, "An application of integrated casexacsd to automotive powertrain systems", in Proceedings of the 1996 IEEE International Symposium on Computer-Aided Control System Design, Dearborn, MI, September 1996, pp. 339-345.
20. A. Cervin, J. Eker D. Henriksson, B. Lincoln and K.E. Arzén, "How does control timing affect performance? Analysis and simulation of timing using Jitterbug and TrueTime", IEEE Control Systems Magazine, 23, pp. 16-30, 2003.
21. J. Chen and R.J. Patton, Robust Model-Based Fault Diagnosis for Dynamic Systems, Number 3 in Series on Asian Studies in Computer and Information Science, Norwell, MA: Kluwer International, 1999.
22. R.A. Decarlo, M.S. Branicky, S. Pettersson and B. Lennartson, "Perspectives and results on the stability and stabilizability of hybrid systems", Proceedings of the IEEE, 88, pp. 1069-1082, 2000.
23. ETAS. ASCET. http://www.etas.de (accessed 20 February 2006).
24. J. Ezzine and A.H. Haddad, "Controllability and observability of hybrid systems", in Proceedings of the 1988 American Control Conference, pp. 41-46, 1988.
25. B.S. Heck, L.M. Wills and G.J. Vachtsevanos, "Software technology for implementing reusable, distributed control systems", IEEE Control Systems Magazine, Vol. 23, No. 1, pp. 21-35, February 2003.
26. H. Heinecke, K.-P. Schnelle, H. Fennel, J. Bortolazzi, L. Lundh, J. Leflour, J.-L. Mat/'e, K. Nishikawa and T. Scharnhorst, "Automotive open system architecture - an industry-wide initiative to manage the complexity of emerging automotive e/e-architectures", in Proceedings of Convergence 2004, Detroit, MI, October 2004.
27. R. Isermann, "Mechatronic systems innovative products with embedded control", in Proceedings of the 16th IFAC World Congress, Prague, CZ, July 2005 (Plenary lecture).
28. K.H. Johansson, M. Törngren and L. Nielsen, "Vehicle applications of controller area network", in Handbook of Networked and Embedded Control Systems, D. Hristu-Varsakelis and W.S. Levine, Eds, Boston, MA: Birkhäuser, 2005, pp. 741-766.
29. K. Keutzer, S. Malik, R. Newton, J. Rabaey and A.L. Sangiovanni- Vincentelli, "System level design: Orthogonalization of concerns and platformbased design", IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 19(12), pp. 1523-1543, 2000.
30. J. Lygeros, C. Tomlin and S. Sastry, "Controllers for reachability specifications for hybrid systems", Automatica, 35, 1999.
31. G. Martin, "The future of high-level modelling and system level design: Some possible methodology scenarios", in Proceedings of 9th IEEE/DATC Electronic Design Processes Workshop (EDP2002), Monterey, CA, Section 1.1, pp. 1-5, April 2002a.
32. G. Martin, "Guest editor's introduction: The reuse of complex architectures", IEEE Design and Test of Computers, 19, pp. 4-5, November/December 2002b.
33. R. Mobus, M. Baotic and M. Morari, "Multi-object adaptive cruise control", in Hybrid Systems: Computation and Control, HSCC 2003, volume 2623 of Lecture Notes in Computer Science, O. Maler and A. Pnueli, Eds., Berlin: Springer Verlag, 2003, pp. 359-374.
34. A. Nerode and W. Kohn, "Models for hybrid systems: Automata, topologies, controllability, observability", in Hybrid Systems, Lecture Notes in Computer Science 736, Berlin: Springer-Verlag, 1993, pp. 317-356.
35. S. Pettersson and B. Lennartson, "Lmi for stability and robustness of hybrid systems", in Proceedings of 16th American Control Conference, Albuquerque, NM, USA, June 1997, Vol. 3, pp. 1714-1718.
36. K. Poolla, P. Khargonekar, A. Tikku, J. Krause and K. Nagpal, "A time-domain approach to model validation", in Proceedings of the IEEE American Control Conference (ACC1992), pp. 313-317, 1992.
37. A. Sangiovanni-Vincentelli, "Defining platform-based design", EEdesign, February 2002. http://www.eedesign.com/
38. A.L. Sangiovanni-Vincentelli, L. Carloni, F. De Bernardinis and M. Sgroi, "Benefits and challenges for platform-based design", in Proceedings of the Design Automation Conference (DAC04), San Diego, CA, USA, June 2004.
39. R. Smith and G.E. Dullerud, "Continuous-time control model validation using finite experimental data", IEEE Trans. on Automatic Control, 41, pp. 1094-1105, 1996.
40. R.S. Smith and J.C. Doyle, "Model validation: A connection between robust control and identification", IEEE Trans. on Automatic Control, 37, pp, 942-952, 1992.
41. The MathWorks. Matlab, Simulink, State.ow. http:// www.mathworks.com (accessed 20 February 2006).