A New Microporous Surface Coating for Enhancement of Pool and Flow Boiling Heat Transfer

Advances in Heat Transfer

Volumn 38, Issue C, 2004, Pages 73-142

  YOU, SEUNG M ^a   RAINEY, KEVIN N ^b   AMMERMAN, CURTT N ^b  

^a The University of Texas at Arlington   (United States)

^b LOS ALAMOS NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 33645692942     PISSN: 00652717     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S0065-2717(04)38002-0     Document Type: Review

References (83)

1. Kurihara H.M., and Myers J.E. The effects of superheat and surface roughness on boiling coefficients. AIChE J 6 1 (1960) 83-91
2. Benjamin R.J., and Balakrishnan A.R. Nucleation site density in pool boiling of saturated pure liquids: effect of surface microroughness and surface and liquid physical properties. Exp. Ther. Fluid Sci 15 1 (1997) 32-42
3. Ramilison J.M., Sadasivan P., and Lienhard J.H. Surface factors influencing burnout on flat heaters. J. Heat Transfer 114 1 (1992) 287-290
4. Chowdhury S.K.R., and Winterton R.H.S. Surface effects in pool boiling. Int. J. Heat Mass Transfer 28 10 (1985) 1881-1889
5. Berenson P.J. Experiments on pool-boiling heat transfer. Int. J. Heat Mass Transfer 5 (1962) 985-999
6. Nishio S., and Chandratilleke G.R. Steady-state pool boiling heat transfer to saturated liquid helium at atmospheric pressure. JSME Int. J. Series II 32 4 (1989) 639-645
7. Sakurai A., Shiotsu M., Hata K., and Fukuda K. Effect of surface conditions on pool boiling critical heat fluxes in saturated and subcooled liquid nitrogen at various pressures. In: Kittel P. (Ed). Advances in Cryogenic Engineering 43 (1997), Plenum Press, New York 1305-1312
8. Yu J., Momoki S., and Koyama S. Experimental study of surface effect on flow boiling heat transfer in horizontal smooth tubes. Int. J. Heat Mass Transfer 42 (1999) 1909-1918
9. Kandlikar S.G., and Spiesman P.H. Effect of surface finish on flow boiling heat transfer. ASME Publ HTD-Vol. 361-1 (1998) 157-163
10. Groenveld, D. C. (1981). "Heat Transfer Phenomena Related to the Boiling Crisis". AECL-7239, Chalk River Nuclear Laboratory
11. Chernobai V.A. Model for heat transfer crisis for water boiling in pipes. High Temperature-USSR 18 (1980) 797-801
12. Chaudri I.H., and McDougall I.R. Aging studies in nucleate pool boiling of isopropyl acetate and perchlorethylene. Int. J. Heat Mass Transfer 12 (1969) 681-688
13. Nishikawa K., Fujita Y., Ohta H., and Hidaka S. Effect of the surface roughness on the nucleate boiling heat transfer over the wide range of pressure. Proceedings of the 7th International Heat Transfer Conference (1982), Munich, Germany 61-66
14. Griffith P., and Wallis J.D. The role of surface conditions in nucleate boiling. Chem. Eng. Prog. Symp. Ser No. 49 56 (1960) 49-63
15. Thome J.R. Enhanced Boiling Heat Transfer (1990), Hemisphere Publishing, Washington, D.C 64-141
16. Thome J.R. Mechanisms of enhanced nucleate pool boiling. Proceedings of the Engineering Foundation Conference on Pool and External Flow Boiling (1992), ASME, New York 337-343
17. Bergles A.E. Enhancement of pool boiling. Int. J. Refrig 20 8 (1997) 545-551
18. Webb R.L. Principles of Enhanced Heat Transfer (1994), Wiley Interscience, New York 311-372 Chapter 11.
19. Webb R.L. Nucleate boiling on porous coated surfaces. Heat Transfer Eng 4 3-4 (1983) 71-82
20. Webb R.L., and Chien L.H. Boiling on structured surfaces. In: Kakaç S., et al. (Ed). Heat Transfer Enhancement of Heat Exchangers (1999), Kluwer Academic Publishers, Netherlands 249-284
21. Chien L.H., and Webb R.L. Visualization of pool boiling on enhanced surfaces. Exp. Ther. Fluid Sci 16 4 (1998) 332-341
22. Nakayama W., Daikoku T., and Nakajima T. Effects of pore diameters and system pressure on saturated pool nucleate boiling heat transfer from porous surfaces. J. Heat Transfer 104 (1982) 286-291
23. Czikk A.M., O'Neill P.S., and Gottzmann C.F. Nucleate pool boiling from porous metal films: effect of primary variables. ASME Publ HTD-Vol. 18 (1981) 109-122
24. Wadekar V.V. A comparative study of in-tube boiling on plain and high flux coated surfaces. Enhanced Heat Transfer 5 (1998) 257-264
25. Ikeuchi M., Yumikura T., Fujii M., and Yamanaka G. Heat-transfer characteristics of an internal micro-porous tube with refrigerant-22 under evaporating conditions. ASHRAE Trans 90(Part 1A) (1984) 196-211
26. Lallemand M., Branescu C., and Haberschill P. Local heat transfer coefficients during boiling of R22 and R407C in horizontal smooth and microfin tubes. Int. J. Refrig 24 (2001) 57-72
27. Cheng L., and Chen T. Study of flow boiling heat transfer in a tube with axial microgrooves. Exp. Heat Transfer 14 (2001) 59-73
28. Celato G.P., and Cumo M. Burnout at very high heat fluxes. Wärme- und Stoffübertragung 27 (1992) 233-244
29. Mizunuma H., Behnia M., and Nakayama W. Forced convective boiling of a fluorocarbon liquid in reduced size channels-an experimental study. J. Enhanced Heat Transfer 9 (2002) 69-76
30. Maddox D.E., and Mudawar I. Single- and two-phase convective heat transfer from smooth and enhanced microelectronic heat sources in a rectangular channel. J. Heat Transfer 111 (1989) 1045-1052
31. Kandlikar S.G., and Howell M.J. Investigation of nucleation and heat transfer for subcooled flow boiling on microfin surfaces. 2nd European Thermal-Sciences and 14th UIT National Heat Transfer 1 (1996) 241-248
32. Tong W., Bar-Cohen A., Simon T.W., and You S.M. Contact angle effects on boiling incipience of highly-wetting liquids. Int. J. Heat Mass Transfer 33 1 (1990) 91-103
33. Yang W.J., Takizawa H., and Vrable D.L. Augmented boiling on copper-graphite composite surface. Int. J. Heat Mass Transfer 34 11 (1991) 2751-2758
34. Liang H.S., and Yang W.J. Nucleate pool boiling heat transfer in a highly-wetting liquid on micro-graphite-fiber composite surfaces. Int. J. Heat Mass Transfer 41 13 (1998) 1993-2001
35. Honda H., Takamastu H., and Wei J.J. Enhanced boiling of FC-72 on silicon chips with micro-pin-fins and submicron-scale roughness. J. Heat Transfer 124 2 (2002) 383-390
36. Mudawar I., and Anderson T.M. High flux electronics cooling by means of pool boiling-Part II: Optimization of enhanced surface geometry. ASME Publ HTD-Vol. 111 (1989) 35-49
37. Guglielmini G., Misale M., and Schenone C. Experiments on pool boiling of a dielectric fluid on extended surfaces. Int. Commun. Heat Mass Transfer 23 4 (1996) 451-462
38. Honda, H. and Wei, J. J. (2003). Advances in enhanced boiling heat transfer from electronic components. Presented at the 6th ASME/JSME Thermal Engineering Joint Conference, March 16-20, Hawaii Island, Hawaii, USA
39. You S.M., Simon T.W., and Bar-Cohen A. A technique for enhancing boiling heat transfer with application to cooling of electronic equipment. IEEE Trans. Comp., Hybrids, Manuf. Technol 15 (1992) 823-831
40. McAdams W.H. Heat Transmission (1954), McGraw-Hill, New York 378-408
41. Willingham T.C., and Mudawar I. Channel height effects on forced-convection boiling and critical heat flux from a linear array of discrete heat sources. Int. J. Heat Mass Transfer 35 8 (1992) 1865-1880
42. Zuber, N., (1959). "Hydrodynamic Aspects of Boiling Heat Transfer", AEC Report No. AECU-4439, Physics and Mathematics
43. Rainey K.N., and You S.M. Pool boiling heat transfer from plain and microporous, square pin-finned surfaces in saturated FC-72. J. Heat Transfer 122 3 (2000) 509-516
44. You S.M., Simon T.W., and Bar-Cohen A. Experiments on boiling incipience with a highly-wetting dielectric fluid: effects of pressure, subcooling and dissolved gas content. Proc. 9th Int. Heat Transfer Conf 2 (1990) 337-342
45. Hong Y.S., Ammerman C.N., and You S.M. Boiling characteristics of cylindrical heaters in saturated, gas saturated, and pure-subcooled FC-72. J. Heat Transfer 119 (1997) 313-318
46. You S.M., Simon T.W., and Bar-Cohen A. Experiments on nucleate boiling heat transfer with a highly-wetting dielectric fluid: effects of pressure, subcooling and dissolved gas content. ASME Publ HTD-Vol. 131 (1990) 45-52
47. Bar-Cohen A. Fundamentals of nucleate pool boiling of highly-wetting dielectric liquids. In: Kakaç S., et al. (Ed). Cooling of Electronic Systems (1994), Kluwer Academic Publishers, Netherlands 415-455
48. O'Connor J.P., and You S.M. A painting technique to enhance pool boiling heat transfer in saturated FC-72. J. Heat Transfer 117 (1995) 387-393
49. Chang J.Y., and You S.M. Enhanced boiling heat transfer from microporous surfaces: effects of a coating composition and method. Int. J. Heat Mass Transfer 40 (1997) 4449-4460
50. O'Connor J.P., You S.M., and Price D.C. A dielectric surface coating technique to enhance boiling heat transfer from high power microelectronics. IEEE Transactions on Components, Hybrids and Manufacturing Technology Part A 18 3 (1995) 656-663
51. Chang J.Y., and You S.M. Boiling heat transfer phenomena from microporous and porous surfaces in saturated FC-72. Int. J. Heat Mass Transfer 40 (1997) 4437-4447
52. O'Neill P.S., Gottzmann C.F., and Terbot J.W. Novel heat exchanger increases cascade cycle efficiency for natural gas liquefaction. Adv. Cryogenic Eng 17 (1972) 420-437
53. Hsu Y.Y. On the size range of active nucleation cavities on a heating surface. J. Heat Transfer 84 (1962) 207-216
54. Carslaw H.S., and Jaeger J.C. Conduction of Heat in Solids. 2nd edn. (1986), Clarendon Press, Oxford 75-77
55. Ammerman C.N., You S.M., and Hong Y.S. Identification of pool boiling heat transfer mechanisms from a wire immersed in saturated FC-72 using a single-photo/LDA method. J. Heat Transfer 118 (1996) 117-123
56. Bar-Cohen A., and Simon T.W. Wall superheat excursions in the boiling incipience of dielectric fluids. Heat Transfer Eng 9 3 (1988) 19-31
57. Bankoff S.G. Entrapment of gas in the spreading of a liquid over a rough surface. AIChE J 4 1 (1958) 24-26
58. Chang J.Y., and You S.M. Heater orientation effects on pool boiling of microporous-enhanced surfaces in saturated FC-72. J. Heat Transfer 118 4 (1996) 937-943
59. Rainey K.N., and You S.M. Effects of heater orientation on pool boiling heat transfer from microporous coated surfaces. Int. J. Heat Mass Transfer 44 14 (2001) 2589-2599
60. Park K.A., and Bergles A.E. Effects of size of simulated microelectronic chips on boiling and critical heat flux. J. Heat Transfer 110 (1988) 728-734
61. Saylor J.R., Simon T.W., and Bar-Cohen A. The effect of a dimensionless length scale on the critical heat flux in saturated, pool boiling. ASME Publ HTD-Vol. 108 (1989) 71-80
62. Bar-Cohen A., and McNeil A. Parametric effects of pool boiling critical heat flux in dielectric liquids. Proceedings of the Engineering Foundation Conference on Pool and External Flow Boiling (1992) pp. 171, 175 Santa Barbara, CA
63. Rainey K.N., You S.M., and Lee S. Effect of pressure, subcooling, and dissolved gas on pool boiling heat transfer from microporous surfaces in FC-72. J. Heat Transfer 125 1 (1992) 75-83
64. Mudawar I., and Anderson T.M. Parametric investigation into the effects of pressure, subcooling, surface augmentation and choice of coolant on pool boiling in the design of cooling systems for high-power-density electronic chips. J. Electronic Packaging 112 (1990) 375-381
65. Watwe A.A., Bar-Cohen A., and McNeil A. Combined pressure and subcooling effects on pool boiling from a PPGA chip package. J. Electronic Packaging 119 (1997) 95-105
66. Chang J.Y., You S.M., and Haji-Sheikh A. Film boiling incipience at the departure from natural convection on flat, smooth surfaces. J. Heat Transfer 120 2 (1998) 402-409
67. Carey V.P. Liquid-Vapor Phase-Change Phenomena (1992), Taylor and Francis, Bristol, PA 299-310
68. Yin C.P., Yan Y.Y., Lin T.F., and Yang B.C. Subcooled flow boiling heat transfer of R-134a and bubble characteristics in a horizontal annular duct. Int. J. Heat Mass Transfer 43 11 (2000) 1885-1896
69. Wiebe J.R., and Judd R.L. Superheat layer thickness measurements in saturated and subcooled nucleate boiling. J. Heat Transfer 93 4 (1971) 455-461
70. Marek R., and Straub J. The origin of thermocapillary convection in subcooled nucleate pool boiling. Int. J. Heat Mass Transfer 44 3 (2001) 619-632
71. Rohsenow W.M. A method of correlating heat transfer data for surface boiling of liquids. J. Heat Transfer 74 (1962) 969-975
72. Hong Y.S., Ammerman C.N., and You S.M. Effects of length scale, subcooling, and dissolved gas content on the pool boiling critical heat flux of cylindrical heaters. Proceedings of the 11th International Heat Transfer Conference (1998), Kyongju, Korea 389-394
73. Inoue T., Kawae N., and Monde M. Effect of subcooling on critical heat flux during pool boiling on a horizontal wire. Heat Mass Transfer 33 56 (1998) 481-488
74. Elkassabgi Y., and Lienhard J.H. Influences of subcooling on burnout of horizontal cylindrical heaters. J. Heat Transfer 110 (1988) 479-486
75. Chang J.Y., and You S.M. Enhanced boiling heat transfer from micro-porous cylindrical surfaces in saturated FC-87 and R-123. J. Heat Transfer 119 (1997) 319-325
76. Ammerman C.N., and You S.M. Enhancing small-channel convective boiling performance using a microporous surface coating. J. Heat Transfer 123 (2001) 976-983
77. Rainey K.N., Li G., and You S.M. Flow boiling heat transfer from plain and microporous coated surfaces in subcooled FC-72. J. Heat Transfer 123 5 (2001) 918-925
78. Mudawar I., and Maddox D.E. Critical heat flux in subcooled flow boiling of fluorocarbon liquid on a simulated electronic chip in a vertical rectangular channel. Int. J. Heat Mass Transfer 32 2 (1989) 379-394
79. Haramura Y., and Katto Y. A new hydrodynamic model of critical heat flux, applicable widely to both pool and forced convection boiling on submerged bodies in saturated liquids. Int. J. Heat Mass Transfer 26 3 (1983) 389-399
80. Ammerman C.N., and You S.M. Consecutive-photo method to measure volume flow rate during boiling from a wire immersed in saturated liquid. J. Heat Transfer 120 3 (1998) 561-567
81. Kim J.H., Rainey K.N., You S.M., and Pak J.Y. Mechanism of nucleate boiling heat transfer enhancement from microporous surfaces in saturated FC-72. J. Heat Transfer 124 3 (2002) 500-506
82. Paul D.D., and Abdel-Khalik S.I. A statistical analysis of saturated nucleate boiling along a heated wire. Int. J. Heat Mass Transfer 26 (1983) 509-519
83. Ammerman C.N., and You S.M. Determination of the boiling enhancement caused by surfactant addition to water. J. Heat Transfer 118 (1996) 561-567