Identi cation of the dynamic models of machine tool supporting systems. Part I: An algorithm of the method

JVC/Journal of Vibration and Control

Volumn 12, Issue 3, 2006, Pages 257-277

  Berczyński, Stefan ^a   Gutowski, Paweł ^a  

^a WEST POMERANIAN UNIVERSITY OF TECHNOLOGY   (Poland)

Author keywords

Damping; Identification; Machine tool model; Stiffness

Indexed keywords

ALGORITHMS; DAMPING; DECISION THEORY; FINITE ELEMENT METHOD; IDENTIFICATION (CONTROL SYSTEMS); MACHINE TOOLS; MODEL STRUCTURES; STIFFNESS;

DYNAMIC MODELS; MACHINE TOOL MODEL; MACHINE TOOL SUPPORTING SYSTEMS;

CONTROL SYSTEM ANALYSIS;

EID: 33645662248     PISSN: 10775463     EISSN: 17412986     Source Type: Journal    
DOI: 10.1177/1077546306062769     Document Type: Article

References (41)

1. Andrew, C., Cockburn, J. A., and Waring, A. E., 1967, "Metal surfaces in contact under normal forces: Some dynamic stiffness and damping characteristics, " in Proceedings of the Institute of Mechanical Engineering, London 182 (3 K). 92 - 100.
2. Back, N., Burdekin, M., and Cowley, A., 1973, "Review of the research on fixed and sliding joints, " in Proceedings of the 13th International Machine Tool Design and Research Conference, Birmingham, S. A. Tobias and F. Koenigsberger, editors, MacMillan, London, pp. 87 - 97.
3. Burdekin, M., Cowley, A., and Back, N., 1978a, "An elastic mechanism for the microsliding characteristics between contacting machined surfaces, " Journal of Mechanical Engineering Science 20 (3). 121 - 127.
4. Burdekin, M., Back, N., and Cowley, A., 1978b, "Experimental study of normal and shear characteristics of machined surfaces in contact, " Journal of Mechanical Engineering Science 20 (3). 129 - 132.
5. Ewins, D. J., 1995, Modal Testing: Theory and Practice, Wiley, New York.
6. Friswell, M. I. and Mottershead, J. E., 1995, Finite Element Model Updating in Structural Dynamics, Kluwer Academic, Dordrecht.
7. Fu, W. P., Huang, Y. M., and Zhang, X. L., 1993, "Experimental investigation on damping behavior of normal joint surfaces at unit area, " Modeling, Measurement and Control B 51 (2). 13 - 20.
8. Fu, W. P., Huang, Y. M., and Zhang, X. L., 2000, "Experimental investigation of dynamic normal characteristics of machined joint surfaces, " Journal of Vibration and Acoustics 122 (4). 393 - 398.
9. Grudzińnski, K., Konowalski, K., and Gutowski, P., 1987, Experimental Investigation of Tangential Deformability of Contact Joints, Prace Naukowe Politechniki Szczecińnskiej, 339, Szczecin, 87 - 110 (in Polish).
10. Gutowski, P., 2002, "The influence of insufficient information from experiment on correctness and uniqueness of parameter identification", in Proceedings of the 36th International Conference of Modeling and Simulation of Systems MOSIS'02, Roznov pod Radhoštem, Czech Republic, April 22-24, Vol. 1, pp. 329 - 336.
11. Gutowski, P., 2003, Identif ication of Parameters ofMachine Tool Supporting System Dynamic Models, Prace Naukowe Politechniki Szczecińnskiej, 574, Wydzia Mechaniczny, 1, Szczecin (in Polish).
12. Gutowski, P. and Berczyńnski, S., 1995, "Parameters identification of multi-degrees-of-freedom dynamic models of machines, " in Proceedings of the 9th World Congress on the Theory of Machines and Mechanisms, Milano, Italy, August 30-31/September 1-2, Vol. 2, pp. 1349 - 1354.
13. Gutowski, P. and Berczyńnski, S., 2006, "Identification of the dynamic models of machine tool supporting systems. Part II: An example of the application of the method, " Journal of Vibration and Control 12, 279 - 295.
14. Gutowski, P. and Skrodzewicz, J., 2001, "Experimental investigation of flat contact joints under dynamic loads, " in Proceedings of the V Conference: Metody dońswiadczalne w budowie i eksploatacji maszyn, Politechnika Wroc awska, Wroc aw - Szklarska Por d eba, Vol. 1, pp. 341 - 352 (in Polish).
15. Gutowski, P. et al., 2003, "Identification of Parameters and Shaping Dynamic Properties of Machine Tools, " Report of the Research Project No 7 T07D 009 018 financed by the Polish Council for Scientific Researches of the Polish Academy of Science, Szczecin (in Polish).
16. Heylen, W., Lammens, S., and Sas, P., 1997, Modal Analysis Theory and Testing, KU Leuven.
17. Imregun, M. and Visser, W. J., 1991, "A review of model updating techniques, " Shock and Vibration Digest 23, 9 - 20.
18. Kruszewski, J. et al., 1975, The Rigid Finite Element Method, Arkady, Warszawa (in Polish).
19. Lammens, S., Heylen, W., and Sas, P., 1993, "Model updating using frequency response functions: Case studies, " in Proceedings of the International Conference of Structural Dynamics Modeling Tests, Analysis and Correlation, Milton Keynes, UK, pp. 195 - 204.
20. Levina, Z. M. and Reshetov, D. N., 1971, Contact Stiffness of Machine Tools, Mashinostroenie, Moscow (in Russian).
21. Maia, N. M. M. and Silva, J. M. M., 1998, Theoretical and Experimental Modal Analysis, Research Studies Press, Baldock, Hertfordshire, UK.
22. Mindlin, R. D., 1949, "Compliance of elastic bodies in contact, " ASME Journal of Applied Mechanics 71 (16). 259 - 268.
23. Modak, S. V., Kundra, T. K., and Nakra, B. C., 2002, "Use of updated finite element model for dynamic design, " Mechanical Systems and Signal Processing 16 (2- 3). 303 - 322.
24. Mottershead, J. E. and Friswell, M. I, 1993, "Model updating in structural dynamics: A survey, " Journal of Sound and Vibration 162, 347 - 375.
25. Natke, H. G., 1988, "Updating computational models in the frequency domain based on measured data: A survey, " Probabilistic Engineering Mechanics 3, 8 - 25.
26. Petuelli, G., 1983, Theoretical and Experimental Determination of Stiffness and Damping of Normally Loaded Joints, Ph.D. thesis, Aachen (in German).
27. Reshetov, D. N. and Levina, Z. M., 1958, "Excitation and damping of vibration in machine tools, " Vibration Testing of Metal-Cutting Machine Tools at Metal Cutting, V. I. Dikuszin and D. N. Reshetov, Moscow (in Russian).
28. Schweppe, F. C., 1978, Uncertain Dynamic Systems, WNT, Warszawa (in Polish).
29. Shoukry, S. N., 1980, Some Aspects of the Dynamic Performance of Machine Tool Structural Joints,Ph.D. thesis, University of Aston in Birmingham, UK.
30. Shoukry, S. N., 1985, "A mathematical model for the stiffness of fixed joints betweenmachine parts, " in Proceedings of the NUMETA 85 Conference, Swansea, UK, 7-11 January, pp. 851 - 858.
31. Skrodzewicz, J. and Gutowski, P., 2000, "Nonlinear mathematical models of weakly loaded contact joints, " Journal of Theoretical and Applied Mechanics (Mechanika Teoretyczna i Stosowana) 38 (4). 781 - 789.
32. Szwengier, G., 1994, Modeling and Design Calculations of Machine Tool Slideway Systems, Prace Naukowe Politechniki Szczecińnskiej, 512, Instytut Technologii Mechanicznej 13, Szczecin (in Polish).
33. Szymanowski, J. et al., 1984, Optimization Methods in FORTRAN, PWN, Warszawa (in Polish).
34. Thornley, R. H., 1971, A Study of Some Parameters which Inf luence the Static and Dynamic Stiffness of Joints in Machine Tool Structures, Ph.D. thesis, University of Manchester, UK.
35. Uhl, T., 1997, Computer Aided Identif ication of Mechanical Structure Models, WNT, Warszawa (in Polish).
36. Uhl, T., Lisowski, W., and Bochniak, W., 2000, Finite Element Model Updating Problems, Wydawnictwo Katedry Robotyki i Dynamiki Maszyn AGH, Kraków (in Polish).
37. Van der Auweraer, H., Guillaume, P., Verboven, P., and Vanlanduit, S., 2001, "Application of the fast-stabilizing frequency domain parameter estimation method, " Transactions of the ASME, Journal of Dynamic Systems, Measurement, and Control 123 (4). 651 - 658.
38. Weck, M. and Eckstein, R., 1987, "An Examination technique to determine static weak points of machine tools, " Annuals of the CIRP 36 (1). 257 - 261.
39. Witek, A., Żmijewski, W., Szwengier, G., and Wońzny, T., 1983, "The software for computation of machine tool supporting systems", in Proceedings of the IV Conference: Metody i ńsrodki projektowania automatycznego, Technical University of Warszawa, pp. 371 - 381 (in Polish).
40. Zang, C., Grafe, H., and Imregun, M., 2001, "Frequency-domain criteria for correlating and updating dynamic finite element models, " Mechanical Systems and Signal Processing 15 (1). 139 - 155.
41. Zhang, X. L., Huang, Y. M., and Fu, W. P., 1998, "Research on the normal damping of machine joints, " in Proceedings of Design Engineering Technical Conference, ASME, Atlanta, GA, DETC 98/MECH-584.