-
1
-
-
12344321393
-
Range of motion and stability in total hip arthroplasty with 28-, 32-, 38-, and 44-mm femoral head sizes
-
Burroughs, B. R., Hallstrom, B., Golladay, G. J., Hoeffel, D., and Harris, W. H. Range of motion and stability in total hip arthroplasty with 28-, 32-, 38-, and 44-mm femoral head sizes. J. Arthroplasty, 2005, 20 11-19.
-
(2005)
J. Arthroplasty
, vol.20
, pp. 11-19
-
-
Burroughs, B.R.1
Hallstrom, B.2
Golladay, G.J.3
Hoeffel, D.4
Harris, W.H.5
-
2
-
-
9644275299
-
Total resurfacing for osteonecrosis of the hip
-
Schmalzried, T. P. Total resurfacing for osteonecrosis of the hip. Clin. Orthop., 2004, 429, 151-156.
-
(2004)
Clin. Orthop.
, vol.429
, pp. 151-156
-
-
Schmalzried, T.P.1
-
3
-
-
0032949430
-
Analysis of 118 2nd generation metal-on-metal retrieved hip implants
-
Sieber, H. P., Rieker, C. B., and Kottig, P. Analysis of 118 2nd generation metal-on-metal retrieved hip implants. J. Bone Jt Surg., 1999; 81B, 46-50.
-
(1999)
J. Bone Jt Surg.
, vol.81 B
, pp. 46-50
-
-
Sieber, H.P.1
Rieker, C.B.2
Kottig, P.3
-
4
-
-
0033378263
-
Metal-on-metal bearing in hip prosthesis generates 100-fold less wear debris than metal-on-polyethylene
-
Anissian, H. L., Stark, A., Gustafson, A., Good, V., and Clarke, I. C. Metal-on-metal bearing in hip prosthesis generates 100-fold less wear debris than metal-on-polyethylene. Acta. Orthop. Scand., 1999, 70, 578-582.
-
(1999)
Acta. Orthop. Scand.
, vol.70
, pp. 578-582
-
-
Anissian, H.L.1
Stark, A.2
Gustafson, A.3
Good, V.4
Clarke, I.C.5
-
5
-
-
0035736451
-
The wear of metal-on-metal total hip prostheses measured in a hip simulator
-
Scholes, S. C., Green, S. M., and Unsworth, A. The wear of metal-on-metal total hip prostheses measured in a hip simulator. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2001, 215, 523-530.
-
(2001)
Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine
, vol.215
, pp. 523-530
-
-
Scholes, S.C.1
Green, S.M.2
Unsworth, A.3
-
6
-
-
0034117155
-
Dissemination of wear particles to the liver, spleen, and abdominal lymph nodes of patients with hip or knee replacement
-
Urban, R. M., Jacobs, J. J., Tomlinson, M. J., Gavrilovic, J., Black, J., and Peoc'h, M. Dissemination of wear particles to the liver, spleen, and abdominal lymph nodes of patients with hip or knee replacement. J. Bone Jt Surg., 2000, 82A, 457-476.
-
(2000)
J. Bone Jt Surg.
, vol.82 A
, pp. 457-476
-
-
Urban, R.M.1
Jacobs, J.J.2
Tomlinson, M.J.3
Gavrilovic, J.4
Black, J.5
Peoc'h, M.6
-
7
-
-
0032190304
-
Metal wear particle characterization from metal on metal total hip replacements: Transmission electron microscopy study of periprosthetic tissues and isolated particles
-
Doorn, P. F., Campbell, P. A., Worrall, J., Benya, P. D., McKellop, H. A., and Amstutz, H. C. Metal wear particle characterization from metal on metal total hip replacements: Transmission electron microscopy study of periprosthetic tissues and isolated particles. J. Biomed. Mater. Res., 1998, 42, 103-111.
-
(1998)
J. Biomed. Mater. Res.
, vol.42
, pp. 103-111
-
-
Doorn, P.F.1
Campbell, P.A.2
Worrall, J.3
Benya, P.D.4
McKellop, H.A.5
Amstutz, H.C.6
-
8
-
-
4243340152
-
The wear performance of precision Co-Cr-Mo alloy metalon-metal hip bearings
-
(Rush University Press, Chicago)
-
Poggie, R. A., Afflitto, R., and John, K. S. The wear performance of precision Co-Cr-Mo alloy metalon-metal hip bearings. Transactions of the 12th Annual International Symposium for Technology in Arthroplasty, 1999, XI, pp. 1-2 (Rush University Press, Chicago).
-
(1999)
Transactions of the 12th Annual International Symposium for Technology in Arthroplasty
, vol.11
, pp. 1-2
-
-
Poggie, R.A.1
Afflitto, R.2
John, K.S.3
-
9
-
-
0035229408
-
The effect of femoral head diameter upon lubrication and wear of metal-on-metal total hip replacements
-
Smith, S. L., Dowson, D., and Goldsmith, A. A. J. The effect of femoral head diameter upon lubrication and wear of metal-on-metal total hip replacements. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2001, 215, 161-170.
-
(2001)
Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine
, vol.215
, pp. 161-170
-
-
Smith, S.L.1
Dowson, D.2
Goldsmith, A.A.J.3
-
10
-
-
0034989649
-
Duration and frequency of every day activities in total hip patients
-
Morlock, M., Schneider, E., Bluhm, A., Vollmer, M., Bergmann, G., Muller, V., and Honl, M. Duration and frequency of every day activities in total hip patients. J. Biomechanics, 2001, 34, 873-881.
-
(2001)
J. Biomechanics
, vol.34
, pp. 873-881
-
-
Morlock, M.1
Schneider, E.2
Bluhm, A.3
Vollmer, M.4
Bergmann, G.5
Muller, V.6
Honl, M.7
-
11
-
-
0037314745
-
The influence of resting periods on friction in the artificial hip
-
Nassutt, R., Wimmer, M. A., Schneider, E., and Morlock, M. M. The influence of resting periods on friction in the artificial hip. Clin. Orthop., 2003, 407, 127-138.
-
(2003)
Clin. Orthop.
, vol.407
, pp. 127-138
-
-
Nassutt, R.1
Wimmer, M.A.2
Schneider, E.3
Morlock, M.M.4
-
12
-
-
0016639244
-
Stiction-friction of total hip prostheses and its relationship to loosening
-
Simon, S. R., Paul, I. L., Rose, R. M., and Radin, E. L. Stiction-friction of total hip prostheses and its relationship to loosening. J. Bone Jt Surg., 1975, 57A, 226-230.
-
(1975)
J. Bone Jt Surg.
, vol.57 A
, pp. 226-230
-
-
Simon, S.R.1
Paul, I.L.2
Rose, R.M.3
Radin, E.L.4
-
13
-
-
17544388139
-
Surface characterization of metal-on-metal implants tested in a hip simulator
-
Wang, A., Yue, S., Bobyn, J. D., Chan, F. W., and Medley, J. B. Surface characterization of metal-on-metal implants tested in a hip simulator. Wear, 1999, 225-229, 708-715.
-
(1999)
Wear
, vol.225-229
, pp. 708-715
-
-
Wang, A.1
Yue, S.2
Bobyn, J.D.3
Chan, F.W.4
Medley, J.B.5
-
14
-
-
11744335821
-
A new screening method designed for wear analysis of bearing surfaces used in total hip arthroplasty
-
ASTM 1346 STP (Eds J. J. Jacobs and T. L. Craig), (American Society for Testing and Materials, Philadelphia, Pennsylvania)
-
Wimmer, M. A., Nassutt, R., Lampe, F., Schneider, E., and Morlock, M. M. A new screening method designed for wear analysis of bearing surfaces used in total hip arthroplasty. In Alternative Bearing Surfaces in Total Joint Replacement, ASTM 1346 STP (Eds J. J. Jacobs and T. L. Craig), 1998; pp. 30-43 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
-
(1998)
Alternative Bearing Surfaces in Total Joint Replacement
, pp. 30-43
-
-
Wimmer, M.A.1
Nassutt, R.2
Lampe, F.3
Schneider, E.4
Morlock, M.M.5
-
15
-
-
0042564752
-
Tribochemical reaction on metal-on-metal hip joint bearings - A comparison between in-vitro and in-vivo results
-
Wimmer, M. A., Sprecher, C., Hauert, R., Täger, G., and Fischer, A. Tribochemical reaction on metal-on-metal hip joint bearings - a comparison between in-vitro and in-vivo results. Wear, 2003, 255, 1007-1014.
-
(2003)
Wear
, vol.255
, pp. 1007-1014
-
-
Wimmer, M.A.1
Sprecher, C.2
Hauert, R.3
Täger, G.4
Fischer, A.5
-
17
-
-
0035527869
-
Friction and wear properties of metal/metal hip joints - Application of a novel testing and analysis method
-
Wimmer, M. A., Artelt, D., Kunze, J., Morlock, M. M., Schneider, E., and Nassutt, R. Friction and wear properties of metal/metal hip joints - application of a novel testing and analysis method. Zeitschr. Matwiss., 2001, 32, 891-896.
-
(2001)
Zeitschr. Matwiss.
, vol.32
, pp. 891-896
-
-
Wimmer, M.A.1
Artelt, D.2
Kunze, J.3
Morlock, M.M.4
Schneider, E.5
Nassutt, R.6
-
18
-
-
0041534737
-
Aspects of loosening in McKee-Farrar endoprostheses
-
(Eds G. H. Buchhorn and H. G. Willert), (Hogrefe & Huber, Bern)
-
Täger, K. H. Aspects of loosening in McKee-Farrar endoprostheses. In Technical Principles, Design and Safety of Joint Implants (Eds G. H. Buchhorn and H. G. Willert), 1994 (Hogrefe & Huber, Bern).
-
(1994)
Technical Principles, Design and Safety of Joint Implants
-
-
Täger, K.H.1
-
19
-
-
0008898098
-
Analyse von Metall/Metall-Gleitpaarungen bei Hüftgelenken der ersten Generation im Hinblick auf Grundlagen für eine erneute Anwendung
-
Thesis, Ludwigs-Maximilians-University, Muich
-
Täger, G. Analyse von Metall/Metall-Gleitpaarungen bei Hüftgelenken der ersten Generation im Hinblick auf Grundlagen für eine erneute Anwendung. Thesis, Ludwigs-Maximilians-University, Muich, 1998.
-
(1998)
-
-
Täger, G.1
-
20
-
-
0017301712
-
Untersuchungen an Oberflächen und Neogelenkkapseln getragener McKee-Farrar-Endoprothesen
-
Täger, K. H. Untersuchungen an Oberflächen und Neogelenkkapseln getragener McKee-Farrar-Endoprothesen. Arch. Orthop. Unfall.-Chirt., 1976, 86, 101-113.
-
(1976)
Arch. Orthop. Unfall.-Chirt.
, vol.86
, pp. 101-113
-
-
Täger, K.H.1
-
21
-
-
0030935497
-
Experimentelle Untersuchungen an Metall-Metall-Gleitpaarungen und ihre Wertigkeit hinsichtlich eines zu erwartenden in-vivo-Verhaltens
-
Plitz, W., Huber, J., and Refior, H. J. Experimentelle Untersuchungen an Metall-Metall-Gleitpaarungen und ihre Wertigkeit hinsichtlich eines zu erwartenden in-vivo-Verhaltens. Orthopäde, 1997, 26, 135-141.
-
(1997)
Orthopäde
, vol.26
, pp. 135-141
-
-
Plitz, W.1
Huber, J.2
Refior, H.J.3
-
22
-
-
0030454623
-
Engineering issues and wear performance of metal on metal hip implants
-
Chan, F. W., Bobyn, J. D., Medley, J. B., Krygier, J. J., Yue, S., and Tanzer, M. Engineering issues and wear performance of metal on metal hip implants. Clin. Orthop., 1996, 333, 96-107.
-
(1996)
Clin. Orthop.
, vol.333
, pp. 96-107
-
-
Chan, F.W.1
Bobyn, J.D.2
Medley, J.B.3
Krygier, J.J.4
Yue, S.5
Tanzer, M.6
-
23
-
-
0029831455
-
In vivo wear of 3 types of metal-on-metal hip prostheses during 2 decades of use
-
McKellop, H., Park, S. H., Chiesa, R., Doorn, P., Lu, B., Normand, P., Grigoris, P., and Amstutz, H. In vivo wear of 3 types of metal-on-metal hip prostheses during 2 decades of use. Clin. Orthop., 1996, 329, Suppl., 128-140.
-
(1996)
Clin. Orthop.
, vol.329
, Issue.SUPPL.
, pp. 128-140
-
-
McKellop, H.1
Park, S.H.2
Chiesa, R.3
Doorn, P.4
Lu, B.5
Normand, P.6
Grigoris, P.7
Amstutz, H.8
-
24
-
-
0024378353
-
Verschleißverhalten von Pfannen und Kugeln aus CoCrMo-Gußlegierung bei langzeitig implantierten Ganzmetall Hüftprothesen
-
Semlitsch, M., Streicher, R. M., and Weber, H. Verschleißverhalten von Pfannen und Kugeln aus CoCrMo-Gußlegierung bei langzeitig implantierten Ganzmetall Hüftprothesen. Orthopäde, 1989, 18, 377-381.
-
(1989)
Orthopäde
, vol.18
, pp. 377-381
-
-
Semlitsch, M.1
Streicher, R.M.2
Weber, H.3
-
25
-
-
0000240813
-
Physical properties of surfaces. IV - Polishing, surface flow and the formation of Beilby layer
-
Bowden, F. P. and Hughes, T. P. Physical properties of surfaces. IV - Polishing, surface flow and the formation of Beilby layer. Proc. R. Soc. A, 1937, 160, 575-587.
-
(1937)
Proc. R. Soc. A
, vol.160
, pp. 575-587
-
-
Bowden, F.P.1
Hughes, T.P.2
-
26
-
-
0035482039
-
The acting wear mechanisms on metal-on-metal hip joint bearings - In vitro results
-
Wimmer, M. A., Loos, J., Nassutt, R., Heitkemper, M., and Fischer, A. The acting wear mechanisms on metal-on-metal hip joint bearings - in vitro results. Wear, 2001, 250, 129-139.
-
(2001)
Wear
, vol.250
, pp. 129-139
-
-
Wimmer, M.A.1
Loos, J.2
Nassutt, R.3
Heitkemper, M.4
Fischer, A.5
-
27
-
-
0035099422
-
Frictional heating of total hip implants. Part 1: Measurements in patients
-
Bergmann, G., Graichen, F., Rohlmann, A., Verdonschot, N., and van Lenthe, G. H. Frictional heating of total hip implants. Part 1: measurements in patients. J. Biomechanics, 2001, 34, 421-428.
-
(2001)
J. Biomechanics
, vol.34
, pp. 421-428
-
-
Bergmann, G.1
Graichen, F.2
Rohlmann, A.3
Verdonschot, N.4
van Lenthe, G.H.5
-
28
-
-
0020623582
-
Frictional torque in surface and conventional hip replacement
-
Ma, S. M., Kabo, J. M., and Amstutz, H. C. Frictional torque in surface and conventional hip replacement. J. Bone Jt Surg., 1983, 65, 366-370.
-
(1983)
J. Bone Jt Surg.
, vol.65
, pp. 366-370
-
-
Ma, S.M.1
Kabo, J.M.2
Amstutz, H.C.3
-
29
-
-
0024431314
-
In vitro initial fixation of porous-coated acetabular total hip components. A biomechanical comparative study
-
Lachiewicz, P. F., Suh, P. B., and Gilbert, J. A. In vitro initial fixation of porous-coated acetabular total hip components. A biomechanical comparative study. J. Arthroplasty, 1989, 4, 201-206.
-
(1989)
J. Arthroplasty
, vol.4
, pp. 201-206
-
-
Lachiewicz, P.F.1
Suh, P.B.2
Gilbert, J.A.3
-
30
-
-
0026327744
-
Evaluation of acetabular stability in uncemented prostheses
-
Clarke, H. J., Jinnah, R. H., Warden, K. E., Cox, Q. G., and Curtis, M. J. Evaluation of acetabular stability in uncemented prostheses. J. Arthroplasty, 1991, 6, 335-340.
-
(1991)
J. Arthroplasty
, vol.6
, pp. 335-340
-
-
Clarke, H.J.1
Jinnah, R.H.2
Warden, K.E.3
Cox, Q.G.4
Curtis, M.J.5
|