Prediction models for debonding failure loads of carbon fiber reinforced polymer retrofitted reinforced concrete beams

Journal of Composites for Construction

Volumn 10, Issue 1, 2006, Pages 48-59

  Pham, Huy Binh ^a   Al Mahaidi, Riadh ^a  

^a MONASH UNIVERSITY   (Australia)

Author keywords

Bonding; Concrete beams; Failures; Fiber reinforced polymers; Models; Predictions; Retrofitting

Indexed keywords

BEAMS AND GIRDERS; BENDING STRENGTH; CONCRETE CONSTRUCTION; FAILURE ANALYSIS; LOADS (FORCES);

CONCRETE BEAMS; FAILURES; FIBER REINFORCED POLYMERS; PREDICTIONS;

CARBON FIBER REINFORCED PLASTICS;

EID: 33645280108     PISSN: 10900268     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)1090-0268(2006)10:1(48)     Document Type: Article

References (45)

1. Ahmed, O., and Van Gemert, D. (1999). "Effect of longitudinal carbon fiber reinforced plastic laminates on shear capacity of reinforced concrete beams." Proc., 4th Int. Symp. on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, 933-943.
2. Arduini, M., and Nanni, A. (1997). "Behavior of precracked RC beams strengthened with carbon FRP sheets." J. Compos. Constr., 1(2). 63-70.
3. Beber, A. J., Filho, A. C., and Campagnolo, J. L. (1999). "Flexural strengthening of R/C beams with CFRP sheets." Structural faults and repair '99, Engineering Technics Press, Edinburgh, Scotland.
4. Blaschko, M. (1997). "Strengthening with CFRP." Munchner Massivbau Seminar, TU Muchen (in German).
5. Bonacci, J. F., and Maalej, M. (2000). "Externally bonded fiber-reinforced polymer for rehabilitation of corrosion damaged concrete beams." ACI Struct. J., 97(5), 703-711.
6. Chaallal, O., Nollet, M. J., and Perraton, D. (1998). "Strengthening of RC beams by externally bonded fiber-reinforced-plastic plates: Design guidelines for shear and flexure." Can. J. Civ. Eng., 692-764.
7. Chajes, M. J., Thomson, T. A. J., Januszka, T. F., and Finch, W. W. J. (1994). "Flexural strengthening of concrete beams using externally bonded composite materials." Constr. Build. Mater., 8(3), 191-201.
8. Chen, J. F., and Teng, J. G. (2001). "Anchorage strength models for FRP and steel plates bonded to concrete." J. Struct. Eng., 127(7), 784-791.
9. David, E., Djelal, C., Ragneau, E., and Bodin, F. B. (1999). "Use of FRP to strengthen and repair RC beams: Experimental study and numerical simulations." Proc., 8th Int. Conf. on Advanced Composites for Concrete Repair.
10. El-Mihilmy, M. T., and Tedesco, J. W. (2001). "Prediction of anchorage failure for reinforced concrete beams strengthened with fiber-reinforced polymer plates." ACI Struct. J., 98(3), 301-314.
11. Fanning, P. J., and Kelly, O. (2001). "Ultimate response of RC beams strengthened with CFRP plates." J. Compos. Constr., 5(2), 122-127.
12. Gao, B., Leung, W.-H., Cheung, C.-M., Kim, J.-K., and Leung, C. K. Y. (2001). "Effects of adhesive properties on strengthening of concrete beams with composite strips." FRP composites in civil engineering, Elsevier, Hong Kong, 423-432.
13. Garden, H. N., Hollaway, L. C., and Thorne, A. M. (1997). "A preliminary evaluation of carbon fibre reinforced polymer plates for strengthening reinforced concrete members." Proc. Inst. Civ. Eng., Struct. Build., 127-142.
14. Garden, H. N., Quantrill, R. J., Hollaway, L. C., Thorne, A. M., and Parke, G. A. R. (1998). "An experimental study of the anchorage length of carbon fibre composite plates used to strengthen reinforced concrete beams." Constr. Build. Mater., 12, 203-219.
15. Hau, K. M. (1999). Experiments on concrete beams strengthened by bonding fibre reinforced plastic sheets, The Hong Kong Polytechnic Univ., Hong Kong, China.
16. He, J. H., Pilakoutas, K., and Waldron, P. (1997). "Strengthening of reinforced concrete beams with CFRP plates." Non-Metallic (FRP) Reinforcement for Concrete Struct. Proc., 3rd Symp., 343-350.
17. Hognestad, E. (1951). "A study of combined bending and axial load in reinforced concrete members." Eng. Expt. Station Bull., No. 399, Univ of Illinois.
18. Jansze, W. (1997). Strengthening of RC members in bending by externally bonded steel plates, Delft Univ. of Technology, Delft.
19. Khomwan, N., Foster, S. J., and Smith, S. T. (2004). "Debonding failure of CFRP strengthened concrete beams." FRP Composites in Civil Engineering - Proc., CICE 2004, 505-513.
20. Kishi, N., Mikami, H., Matsuoka, K. G., and Kurihashi, Y. (2001). "Failure behavior of flexural strengthened RC beams with AFRP sheet." Proc., FRPRCS-5 - Fibre-Reinforced Plastics for Reinforced Concrete Structures, 85-95.
21. Lees, J. M., Winistörfer, A., and Meier, U. (2002). "External prestressed carbon fiber-reinforced polymer straps for shear enhancement of concrete." J. Compos. Constr., 6(4), 249-256.
22. Leong, K. S., and Maalej, M. (2003). "Effect of beam size on interfacial shear stresses and failure mode of FRP-bonded beams." Proc. FRPRCS-6 - Fibre-Reinforced Polymer Reinforcement for Concrete Structures, 257-266.
23. Maruyama, K., and Ueda, T. (2001). "JSCE design recommendations for upgrading of RC members by FRP sheet." Proc. FRPRCS-5 - Fibre-Reinforced Plastics for Reinforced Concrete Structures, 441-446.
24. Mukhopadhyaya, P., and Swamy, R. N. (2001). "Interface shear stress: A new design criterion for plate debonding." J. Compos. Constr., 5(1), 35-43.
25. Mukhopadhyaya, P., Swamy, R. N., and Lynsdale, C. J. (1998). "Optimizing structural response of beams strengthened with GFRP plates." J. Compos. Constr., 2(2), 87-95.
26. Nguyen, D. M., Chan, T. K., and Cheong, H. K. (2001). "Brittle failure and bond development length of CFRP-concrete beams." J. Compos. Constr., 5(1), 12-17.
27. Oehlers, D. J. (1992). "Reinforced concrete beams with plates glued to their soffits." J. Struct. Eng., 118(8), 2023-2038.
28. Pham, H. B., and Al-Mahaidi, R. (2003). "An investigation into debonding of FRP in flexural strengthening." Proc., 21st ARRB & 11th REAAA Conf.
29. Pham, H. B., and Al-Mahaidi, R. (2004). "Assessment of available prediction models for the strength of FRP retrofitted RC beams." Compos. Struct., 66(1-4), 601-610.
30. Pornpongsaroj, P., and Pimanmas, A. (2003). "Effect of end wrapping on peeling behavior of FRP-strengthened beams." Proc., FRPRCS-6 - Fibre-Reinforced Polymer Reinforcement for Concrete Structures, 277-286.
31. Quantrill, R. J., Hollaway, L. C., and Thorne, A. M. (1996). "Experimental and analytical investigation of FRP strengthened beam response: Part I." Mag. Concrete Res., 48(177), 331-342.
32. Rahimi, H., and Hutchinson, A. (2001). "Concrete beams strengthened with externally bonded FRP plates." J. Compos. Constr., 5(1), 44-56.
33. Ritchie, P. A., Thomas, D. A., Lu, L.-W., and Connelly, G. M. (1991). "External reinforcement of concrete beams using fiber reinforced plastics." ACI Struct. J., 88(4), 490-500.
34. Ross, C. A., Jerome, D. M., Tedesco, J. W., and Hughes, M. L. (1999). "Strengthening of reinforced concrete beams with externally bonded composite laminates." ACI Struct. J., 96(2), 212-220.
35. Saadatmanesh, H., and Ehsani, M. R. (1991). "RC beams strengthened with GFRP plates. I. Experimental study." J. Struct. Eng., 117(11), 3417-3433.
36. Sharif, A., Al-Sulaimani, G. J., Basunbul, I. A., Baluch, M. H., and Ghaleb, B. N. (1994). "Strengthening of initially loaded reinforced concrete beams using FRP plates." ACI Struct. J., 91(2), 160-168.
37. Smith, G., and Teng, J. G. (2003). "Shear-bending interaction in debonding failures of FRP-plated RC beams." Adv. Struct. Eng., 6(3), 183-199.
38. Smith, S. T., and Teng, J. G. (2002). "FRP-strengthening RC beams. I: Review of debonding strength models." Eng. Struct., 24, 385-395.
39. Standards Australia. (2001), "Concrete structures." AS3600-2001 Australian Standard, Sydney, Australia.
40. Takahashi, Y., and Sato, Y. (2003). "Flexural behavior of RC beams externally reinforced with carbon fiber sheet." Proc., FRPRCS-6 - Fibre-Reinforced Polymer Reinforcement for Concrete Structures, 237-246.
41. Teng, J. G., Smith, G., Yao, J., and Chen, J. F. (2001). "Strength model for intermediate flexural crack induced debonding in RC beams and slabs." FRP composites in civil engineering, Elsevier, Hong Kong, 579-587.
42. Triantafillou, T. C., and Plevris, N. (1992). "Strengthening of RC beams with epoxy-bonded fibre-composite materials." Mater. Struct., 25, 201-211.
43. Tumialan, G., Serra, P., Nanni, A., and Belarbi, A. (1999). "Concrete cover delamination in reinforced concrete beams strengthened with carbon fiber reinforced polymer sheets." Proc. 4th Int. Symp. on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, 725-735.
44. Valcuende, M., and Benlloch, J. (2003). "Ductility of reinforced concrete beams strengthened with CFRP strips and fabric." Proc. FRPRCS-6 - Fibre-Reinforced Polymer Reinforcement for Concrete Structures, 337-346.
45. Zarnic, R., and Bosiljkov, V. (2001). "Behaviour of beams strengthened with FRP and steel plates." Proc., 2001 Structural Congress and Exposition.