Advances in science and technology of compact heat exchangers

Heat Transfer Engineering

Volumn 27, Issue 5, 2006, Pages 3-22

[No Author Info available]

Author keywords

[No Author keywords available]

Indexed keywords

MACHINE DESIGN; MATHEMATICAL MODELS; PRESSURE DROP; RECUPERATORS; THERMODYNAMICS;

COMPACT HEAT EXCHANGERS (CHE); COMPLEX FLOW; THERMODYNAMIC MODELING;

HEAT EXCHANGERS;

EID: 33645227616     PISSN: 01457632     EISSN: 15210537     Source Type: Journal    
DOI: 10.1080/01457630600559462     Document Type: Conference Paper

References (44)

1. Shah, R. K., and Sekulić, D. P., Fundamentals of Heat Exchanger Design, John Wiley, New York, 2003.
2. Shah, R. K., and Skiepko, T., Influence of Leakage Distribution on Rotary Regenerator Thermal Performance, Applied Thermal Engineering, vol. 19, pp. 685-705, 1999.
3. Skiepko, T., and Shah, R. K., The Influence of Leakages on Heat Transfer Performance of Fixed-Matrix Regenerators, Int. J. Heat Mass Transfer, vol. 48, pp. 1608-1632, 2005.
4. Pignotti, A., and Shah, R. K., Effectiveness-Number of Transfer Units Relationships for Heat Exchanger Complex Flow Arrangements, Int. J. Heat Mass Transfer, vol. 35, pp. 1275-1291, 1992.
5. London, A. L., and Seban, R. A., 1942/1980, A Generalization of the Methods of Heat Exchanger Analysis, TR No. NTU-1, Mechanical Engineering Department, Stanford University, Stanford, California, 1942;
6. reprinted in Int. J. Heat Mass Transfer, vol. 23, pp. 5-16, 1980.
7. Domingos, J. D., Analysis of Complex Assemblies of Heat Exchangers, Int. J. Heat and Mass Transfer, vol. 12, pp. 537-548, 1969.
8. Pignotti, A., Matrix Formalism for Complex Heat Exchangers, ASME J. Heat Transfer, vol. 106, pp. 352-369, 1984.
9. Shah, R. K., and Pignotti, A., Basic Thermal Design of Heat Exchangers, Report Int-8513531, National Science Foundation, Washington, DC, 1989.
10. Shah, R. K., and Skiepko, T., Entropy Generation Extrema and Their Relationship with Heat Exchanger Effectiveness - Number of Transfer Unit Behavior for Complex Flow Arrangements, ASME J. Heat Transfer, vol. 126, no. 6, pp. 994-1002, 2004.
11. Bell, K. J., Final Report of the Cooperative Research Program on Shell-and-Tube Heat Exchangers, University of Delaware, Engineering Station Bulletin No. 5, University of Delaware, 1963.
12. Kays, W. M., and London, A. L., Compact Heat Exchangers, Reprint, 3rd ed., Krieger Publishing, Malabar, Fla., 1998.
13. London, A. L., and Shah, R. K., Offset Rectangular Plate-fin Surfaces-Heat Transfer and Flow Friction Characteristics, ASME, J. Engineering Power, vol. 90, Series A, pp. 218-228, 1968.
14. Bejan, A., The Concept of Irreversibility in Heat Exchanger Design: Counterflow Heat Exchangers for Gas-to-Gas Applications, ASME J. Heat Transfer, vol. 99, pp. 374-380, 1977.
15. Baclic, B. S., and Sekulić, D. P., A Crossflow Compact Heat Exchanger of Minimum Irreversibility, Termotehnika, vol. 4, no. 2, pp. 34-12, 1978.
16. Sekulić, D. P., The Second Law Quality of Energy Transformation in a Heat Exchanger, ASME J. Heat Transfer, vol. 112, pp. 295-300, 1990.
17. Shah, R. K., and Kadaba, P. V., Opportunities for Thermodynamic Analysis and Modeling of Heat Exchangers in Thermal Systems, Proc. Int. Symp. on Recent Trends in Heat and Mass Transfer, the Indian Institute of Technology, Gauwahati, Assam, India, pp. 175-200, Tata McGraw-Hill Pub. Co. Ltd., New Delhi, India, 2002.
18. London, A. L., Economics and Second Law: An Engineering View and Methodology, Int. J. Heat Mass Transfer, vol. 25, pp. 743-751, 1982.
19. Bejan, A., Tsatsaronis, G., and Moran, M., Thermal Design and Optimization, Wiley, New York, 1995.
20. Shah, R. K., Brazing of Compact Heat Exchangers, in Compact Heat Exchangers - A. Festschrift for Professor A. L. London, ed. R. K. Shah, A. D. Kraus, and D. E. Metzger, pp. 491-529, Hemisphere Publishing Co., Washington, DC, 1990.
21. Shah, R. K., and Sekulić, D. P., Heat Exchangers, in Handbook of Heat Transfer, 3rd ed., ed. W. M. Rohsenow, J. P. Hartnett, and Y. I. Cho, Chap. 17, McGraw-Hill, New York, 1998.
22. Base Metals, Brazing Filler Metals and Fluxes, Aluminum Brazing Handbook, pp. 24-32, The Aluminum Association Inc., 1990.
23. Aluminum and Aluminum Alloys, ASM Specialty Handbook, pp. 420-437, American Society of Metals, Materials Park, Ohio, 1994.
24. Sekulić, D. P., Salazar, A. J., Gao, F., Rosen, J. S., and Hutchins, H. F., Local Transient Behavior of a Compact Heat Exchanger Core during Brazing, Equivalent Zonal (EZ) Approach, Int. J. Heat Exchangers, vol. 4, no. 1, pp. 91-108, 2003.
25. Sekulić, D. P., Gao, F., Zhao, H., Zellmer, B., and Qian, Y. Y., Prediction of the Fillet Mass and Topology of Aluminum Brazed Joints, Welding Journal-Research Supplement, vol. 83, pp. 102s-110s, 2004.
26. Brazing Handbook, Chapters 3,24,25, and 27, American Welding Society, Miami, Fla., 1991.
27. Rabinkin, A., Wenski, E., and Ribaudo, A., Brazing Stainless Steel Using a New MBF-Series of Ni-Cr-B-Si Amorphous Brazing Foils, Welding Journal, vol. 77, no. 2, pp. 66s-75s, 1998.
28. Rabinkin, A., Overview: Brazing with (NiCoCr)-B-Si Amorphous Brazing Filler Metals - Alloys, Processing, Joint Structure, Properties, Applications, Science and Technology of Welding and Joining, vol. 9, no. 3, pp. 181-199, 2004.
29. Shapiro, A., and Rabinkin, A., State-of-the-art and New Potential Aerospace Applications of Titanium Based Brazing Filler Metals: Overview, Paper 4.7, IBSC2003, San Diego, California, American Welding Society, Miami, Fla., 2003.
30. Smith, R. W., Shapiro, A., and Ivanov, E., Titanium Brazing with Mechanically Alloyed Ti-Zr-Cu-Ni Braze Powders, DVS Berichte, vol. 231, pp. 50-53, 2004.
31. Matsu, K., Miyazawa, Y., Onzava, T., and Ariga, T., Production of All Titanium Brazed Heat Exchanger, IBSC 2003, Paper 5.6, AWS and ASM International, CD Proceedings, 2003.
32. Smith, R.W., and Goldman, R. Fabrication of Titanium Heat Exchangers or Aircraft, IBSC 2003, Paper 5.8, AWS and ASM International, CD Proceedings, 2003.
33. Schwartz, M. M., Brazing, ASM International, Metals Park, Ohio, 1990.
34. Rabinkin, A., Optimization of Brazing Technology, Structural Integrity, and Performance of Multi-channeled, Three Dimensional Metallic Structures, IBSC 2000, pp. 437-444, AWS and ASME International, Miami, Fla. and Materials Park, Ohio, 2000.
35. Larminie, J., and Dicks, A., Fuel Cell Systems Explained, 2nd ed., John Wiley, Chichester, UK, 2003.
36. Shah, R. K., Heat Exchangers for Fuel Cell Systems, in Compact Heat Exchangers and Enhancement Technology for the Process Industries - 2003, ed. R. K. Shah, pp. 205-215, Begell House, New York, 2003.
37. Varbanov, P., Klerneš, J., Shah, R. K., and Shihn, H., Power Cycle Integration and Efficiency Optimisation of Molten Carbonate Fuel Cell Systems, ASME J. Fuel Cell Science and Technology, vol. 3, 2006, in press.
38. Shah, R. K., Compact Heat Exchangers for Microturbines, Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology - 2005, CD Proceedings, pp. 247-257, Engineering Conferences International, Hoboken, NJ, 2005.
39. McDonald, C. F., Low Cost Recuperator Concept for Microturbine Applications, ASME Paper No. 2000-GT-167, ASME, New York, 2000.
40. Muley, A., and Sundén, B., Advances in Recuperator Technology for Gas Turbine Systems, ASME Paper No. IMECE2003-43294, ASME, New York, 2003.
41. Treece, B., Vessa, P., and McKeirnan, R., Microturbine Recuperator Manufacturing and Operating Experience, ASME Paper No. GT-2002-30404, ASME, New York, 2002.
42. Lagerström, G., and Xie, M., High Performance and Cost Effective Recuperator for Micro Gas Turbines, ASME Paper No. GT2002-30402, ASME, New York, 2002.
43. McDonald, C. F., Low-cost Compact Primary Surface Recuperator Concept for Microturbines, Appl. Thermal Eng., vol. 20, pp. 471-497, 2000.
44. Utriainen, E., and Sunden, B., A Comparison of Some Heat Transfer Surfaces for Small Gas Turbine Recuperators, ASME Paper No. 2001-GT-0474, ASME, New York, 2001.