Thermal stress history in high-tensile strength steels during weld process

Journal De Physique. IV : JP

Volumn 120, Issue , 2004, Pages 635-648

  Mochizuki, M ^a   Toyoda, M ^a  

^a OSAKA UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

PHASE TRANSITIONS; RESIDUAL STRESSES; TENSILE STRENGTH; THERMAL STRESS; WELDING;

HIGH-TENSILE STRENGTH STEELS; MATERIAL PROPERTIES; WELD PROCESS; WELDING HEAT CYCLES;

STEEL;

EID: 33645073407     PISSN: 11554339     EISSN: 17647177     Source Type: Conference Proceeding    
DOI: 10.1051/jp4:2004120073     Document Type: Conference Paper

References (22)

1. Satoh, K., "Transient Thermal Stresses of Weld Heat-Affected Zone by Both-Ends-Fixed Bar Analogy," Transactions of the Japan Welding Society, Vol. 3, No. 1, pp. 125-134 (1972).
2. Satoh, K., "Thermal Stresses Developed in High-Strength Steels Subjected to Thermal Cycles Simulating Weld Heat-Affected Zone," Transactions of the Japan Welding Society, Vol. 3, No. 1, pp. 135-142 (1972).
3. Itoh, Y., Nagata, K., Yanuki, T., and Mori, T., "Mechanical Properties of Steels Subjected to Thermal Prestraining Cycles and Its Application to Deformation Analysis of Weld Joint," Journal of the Japan Welding Society (in Japanese), Vol. 52, No. 3, pp. 314-319 (1984).
4. Itoh, Y., Nagata, K., Fukakura, J., and Mori, T., "The Effect of Local Heat Treatment at Weld Zone on Transient Thermal Stresses and Residual Stresses of 13Cr Cast Steel," Quarterly Journal of the Japan Welding Society (in Japanese), Vol. 2, No. 1, pp. 83-88 (1984).
5. Itoh, Y., Nagata, K., Yanuki, T., and Mori, T., "Transient Thermal Stresses and Residual Stresses of 13Cr Cast Steels during Welding," Quarterly Journal of the Japan Welding Society (in Japanese), Vol. 2, No. 2, pp. 348-354 (1984).
6. Itoh, Y., and Tanaka, K., "Residual Stress Characteristics of 13Cr Cast Steel Weldments Prepared with Austenitic Weld Metal," Quarterly Journal of the Japan Welding Society (in Japanese), Vol. 3, No. 3, pp. 604-611 (1985).
7. Itoh, Y., "Mechanical Properties of Weld Metals Subjected to Thermal Prestraining Cycles and Its Application to Deformation Analysis of Weld Joint," Quarterly Journal of the Japan Welding Society (in Japanese), Vol. 3, No. 4, pp. 862-869 (1985).
8. Itoh, Y., Saitoh, Y., Fukakura, J., and Kashiwaya, H., "Multi-Thermal Cycles Simulation of Transient Thermal Stresses of 13Cr Cast Steels during Multi-Pass Welding," Quarterly Journal of the Japan Welding Society (in Japanese), Vol. 4, No. 2, pp. 423-429 (1986).
9. Vincent, Y., Petit-Grostabussiat, S., and Jullien, J. F., "Thermal, Metallurgical, Mechanical Simulations and Experimental Validations of Residual Stresses in the Heat Affected Zone," Document for the 6th International Seminar on Numerical Analysis of Weldability, Graz-Seggau, Austria, pp. 1-21 (2001).
10. Volden, L., Gundersen, Ø., and Rørvik, G., "Development of Residual Stresses in High Strength Low Allow Steel," Proceedings of the 9th International Offshore and Polar Engineering Conference & Exhibition, Brest, France, ISOPE-99-JSC-169, Vol. 4, pp. 134-139 (1999).
11. Gundersen, Ø., Zhang, Z., Volden, L., Rørvik, G., and Akselen, O. M., "Modeling of Residual Stresses in Weld Simulated Restrained C-Mn Steel Specimens," Proceedings of the 9th International Offshore and Polar Engineering Conference and Exhibition, Brest, France, ISOPE-99-JSC-141, Vol. 4, pp. 187-194 (1999).
12. Ashby, M. F., and Easterling, K. E., "A First Report on Diagrams for Grain Growth in Welds," Acta Metallurgica, Vol. 30, pp. 1969-1978 (1982).
13. Kirkaldy, J. S., and Venugopalan, D., "Prediction of Microstructure and Hardenability in Low Alloy Steels," Proceedings of the International Conference on Phase Transformation in Ferrous Alloys, AIME, pp. 125-148 (1983).
14. Bhole, S. D., and Adil, G. K., "HAZ Hardness and Microstructure Predictions of Arc Welded Steels, I. Review of Predictive Models," Canadian Metallurgical Quarterly, Vol. 31, No. 2, pp. 151-157 (1992).
15. Bhole, S. D., and Adil, G. K., "HAZ Hardness and Microstructure Predictions of Arc Welded Steels, II. CCT Diagram Method," Canadian Metallurgical Quarterly, Vol. 31, No. 2, pp. 159-165 (1992).
16. SYSTUS International, SYSWELD'99 User's Manual, Paris (1999).
17. Leblond, J. B., Mottet, G., and Devaux, J. C., "A Theoretical and Numerical Approach to the Plastic Behavior of Steels During Phase Transformation," Journal of Mechanical Physics of Solid, Vol. 34, pp. 395-432 (1986).
18. Thors, T., "Thermomechanical Calculation of Quench Distortion with Application to Case Hardening of Steel," Scandinavian Journal of Metallurgy, Vol. 27, pp. 159-170 (1998).
19. Mochizuki, M., Enomoto, K., Okamoto, N., Saito, H., and Hayashi, E., "Welding Residual Stresses at the Intersection of a Small Diameter Pipe Penetrating a Thick Plate," Nuclear Engineering and Design, Vol. 144, No. 3, pp. 439-447 (1993).
20. Mochizuki, M., Hattori, T., and Nakakado, K., "Residual Stress Reduction and Fatigue Strength Improvement by Controlling Welding Pass Sequences," ASME Journal of Engineering Materials and Technology, Vol. 122, No. 1, pp. 108-112 (2000).
21. Mochizuki, M., Toyoda, M., Pasquale, P., Veneziano, C., and Burget, W., "Numerical Simulation of Welding Heat Cycles during Multi-Pass Welding and their Effects on Joint Performance," Mathematical Modelling of Weld Phenomena 6, IOM Communications, London, United Kingdom, pp. 671-683 (2002).
22. Mochizuki, M., and Toyoda, M., "Numerical Simulation of Temperature and Microstructure in X-80 Girth Welded Pipelines," Application and Evaluation of High-Grade Linepipes in Hostile Environments, Edited by R. Denys and M. Toyoda, Scientific Surveys Ltd, London, United Kingdom, pp. 841-863 (2002).