A new test for monitoring microstickies deposition

Research Forum on Recycling, Proceedings

Volumn , Issue , 2004, Pages 93-101

  Castro, C ^a   Dorris, G M ^a  

^a PAPRICAN   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

DYNAMIC DRAINAGE JAR (DDJ); MICROSTICKIES; PH SHOCKS; PHYSICOCHEMICAL CONDITIONS;

BLENDING; DEPOSITION; PAPERMAKING MACHINERY; PHYSICAL CHEMISTRY; SENSITIVITY ANALYSIS;

ADHESIVES;

MIXING; PAPER MACHINES; SENSITIVITY; STICKIES;

EID: 33645007515     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (38)

1. Allen, L. H., "Deposition Synergy Between Mechanical and Deinked Pulps", Recent Advances in Paper Recycling. Stickies, chap. 7, 140-148, Doshi and associates edition, Appleton, USA (2002).
2. Ben, Y., Doms, G. M. and Allen, J. "Contaminant Removal from Deinking Process Water. Part I: Mill Benchmarking", Pulp Paper Can. 104(1):42-48 (2003).
3. Jay, K., "Stickies: A Growing Cause for Concern", Paper, 203(10):31-33 (1985).
4. Brouillette, F., Daneault, C. and Dorris, G.M., "Effect of Initial pH on the Release of Dissolved, Colloidal and Suspended Solids During Repulping of ONP and CMG", J. Pulp Paper Sci. 28(2): 31-38 (2002).
5. Allen, L. H., "Pitch Control in Paper and Board Mills", in Pitch Control, Wood Resin and Deresination, E. Black and L. H. Allen, eds., ch. 13, TAPPI Press (2000).
6. Otero, D., Sundberg, K., Blanco, A., Negro, C., Tijero, J. and Holmbom, B. "Effects of Wood Polysaccharides on Pitch Deposition", Nordic Pulp Paper Res. J. 15(5):607-613 (2000.)
7. Allen, L. H., Sennett, P. S., Lapointe, C., Truitt, R. E. and Sitholé, B., "Pitch Deposition in Newsprint Mills Using Certain Kaolin Pigments", TAPPI J. 81(7):137-138 (1998).
8. Raymond, L., Gagné, A., Talbot, J., and Gratton, R., "Pitch Deposition in a Fine-Paper Mill", Pulp Paper Can. 99(2):56-59 (1998).
9. Kaye, A., "Understanding and Controlling Pitch Deposition", Am. Papermaker 79(3):46-47 (1997).
10. Dabros, T. and van de Ven, T., "Direct Method for Studying Particle Deposition onto Solid Surfaces", Colloid Polymer Sci. 261(8):694-707 (1983).
11. Dabros, T. and van de Ven, T., "Direct Method for Studying Particle Deposition onto Solid Surfaces", Colloid Polymer Sci. 261(8):694-707 (1983).
12. Pelton, R. and Lawrence, D., "A New Laboratory Approach for Evaluating Kraft Mill Pitch Deposit Control Additives", J. Pulp Paper Sci. 17(3):80-84 (1991).
13. Belouadi, C., Blum, R. and Esser, Anton, "A Novel Approach to Avoiding White Pitch Deposition", Preprints of the 5th Research Forum on Recycling, PAPTAC, Ottawa, 219-223 (1999).
14. Drabek, O., Sterne, J., and van de Ven, T., "Effect of Deinking Chemicals on the Deposition of Fines and Fillers on an Air-Water Interface", J. Pulp Paper Sci. 24(4):116-120 (1998).
15. Elsby, L.E., "Experiences from Tissue and Board Production Using Stickies Additives", Proc. of the TAPPI Pulping Conference, TAPPI Press, Atlanta, Book 1, 187-191 (1986).
16. Doshi, M.R., "Additives to Combat Sticky Contaminants in Secondary Fibers", TAPPI Seminar Notes, Contaminants Problems and Strategies in Waste Paper Recycling, TAPPI Press. 81-89 (1989).
17. Sitholé, B.B., Filion, D. and Allen, L.H., "Laboratory Test to Measure Deposition in Recycled Paper Making", Paper Technol. 40(1):26-30 (1999).
18. Dykstra, GM., Hoekstra, P.M. and Suzuki, T., "A New Method for Measuring Depositable Pitch and Stickies and Evaluating Control Agents", Proc. of the TAPPI Papermakers Conference, TAPPI Press, Atlanta, 327-340 (1988).
19. Carré, B., Fabry, B. and Brun, J., "Comparison of Two Methods to Estimate Secondary Stickies Contamination", Prog. in Paper Recycl. 5(1):68-72 (1995).
20. Negro, C., Blanco, A., Monte, M. C., Otero, D. and Tijero, J., "New System to Predict Deposits due to DCM Destabilization in Paper Mills", Preprints of the 5th Research Forum on Recycling, PAPTAC, Ottawa, 213-216 (1999).
21. Cathie, K., Haydock, R. and Dias, I., "Understanding the Fundamental Factors Influencing Stickies Formation and Deposition", Pulp Paper Can. 93(12):157-161 (1992).
22. Ohtani, Y., "Utilization of Carbon Fibers for Quantitative Estimation and Removal of Pitch from Papeimaking Systems", APPITA 46(1):39-43 (1993).
23. Haynes, R. D., "Measurement of Micro Stickies Formation", Prog. in Paper Recycl. 12(2):19-26 (2(103).
24. Koskinen, J., Sung, D-J., Kazi, F., Yang, J., Banerjee, S., "A Sensor for Microstickies ", TAPPI J. (Apr. 2003).
25. Douek, M., Guo, X. Y., Ing, J., "Overview of the Chemical Nature of Deposits/Stickies in Mills Using Recycled Fiber", Recycling Symposium: Proceedings, (TAPPI Pulp Manufacturing Division, USDA Forest Service, and AF&PA), 313-330 (1997).
26. Krauthauf, T., Putz, H. J. and Göttsching, L. "Effects of Deinking Chemicals on Sticky Depositions", Proc. TAPPI Recycling Symposium, TAPPI Press, Washington, D. C. 693-699 (2000).
27. Aston, D. A. and Paul, S. N., "Controlling Deposits on Paper-Machine Felts Using Cationic Polymer and Cationic Surfactant Mixture", U.S. pat. 4,995,944 , 30 claims. 17 p. Cl.162/199, Issued Feb. 26, 1991.
28. Jong, J.H., Baines, W.D. and Currie, I.G., "Experimental Characteristics of Forming Fabrics and Fibre Mats", J. Pulp Paper Sci. 25(3):95-99 (1999).
29. Thornton, J. "Dissolved and Colloidal Substances in the Production of Wood-Containing Paper", Doctoral Thesis, Åbo Akademi, Turku, Finlande (1993).
30. Castro, C., Dorris, G. M., Brouillette, F. and Daneault, C. "Thermogravimetric Determination of Synthetic Polymers in Recycled Pulps Systems and Deposits", J. Pulp Paper Sci. 29(5):167-172 (2003).
31. Guo, X.Y. and Douek, M., "Analysis of Deposits/Stickies from Newsprint using Recycled Fibre", J. Pulp Paper Sci. 22(11):J431-J438 (1996).
32. Carré, B., Brun, J. and Galland, G., "Incidence of the Destabilization of the Pulp Suspension on the Deposition of Secondary Stickles", Pulp Paper Can. 99(7): 75-79 (1998).
33. Dyer, F., "What is the Effect of pH and Temperature on Stickies Tackiness?", Prog, in Paper Recycl. 8(1):69-74 (1998).
34. Allen, L. H., "The Importance of pH in Controlling Metal-Soap Deposition", TAPPI J. 71(1):61-64 (1988).
35. Krogerus, B., "Composition and Stability of Fines and Colloidal Fractions from Mechanical and Deinked Pulps", Preprints of the International Paper and Coating Chemistry Symposium, Ottawa. 83-88 (1996).
36. th Research Forum on Recycling, PAPTAC, Magog, 107-110 (2001).
37. Garver, T.M. and Yuan, H., "Measuring the Response of Pitch Control Strategies", Preprints of the PAPTAC 87th Annual Meeting, Montreal. A105-A110 (2001).
38. Sihvonen, A.L., Sundberg, K., Sundberg, A. and Holmbom, B., "Stability and Deposition Tendency of Colloidal Wood Resin", Nordic Pulp Paper Res. J. 13(1):64-67 (1998).