On a finite-strain viscoplastic law coupled with anisotropic damage: Theoretical formulations and numerical applications

Archive of Applied Mechanics

Volumn 75, Issue 6-7, 2006, Pages 315-325

  Lin, R C ^a   Brocks, W ^a  

^a INSTITUTE OF MATERIALS RESEARCH   (Germany)

Author keywords

Anisotropic damage; Internal dissipation; Logarithmic strain; Viscoplasticity

Indexed keywords

ANISOTROPY; COMPUTER SIMULATION; CREEP; ENERGY DISSIPATION; STRAIN;

ANISOTROPIC DAMAGE; INTERNAL DISSIPATION; LOGARITHMIC STRAIN;

VISCOPLASTICITY;

EID: 33644598624     PISSN: 09391533     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00419-005-0416-3     Document Type: Article

References (35)

1. Bodner, S.R., Partom, Y.: Constitutive equations for elastic-viscoplastic strain hardening materials. J Appl Mech 42, 385-389 (1975)
2. Chaboche, J.L.: Viscoplastic constitutive equations for the description of cyclic and anisotropic behaviour of metals. In: Bull de l' Acad Polonaise des Sciences, Série Sc et Tech, 17th Polish Conf Mech Solids, Szczyrk, pp. 33-41 (1975)
3. Chaboche, J.L., Rousselier, G.: On the plastic and viscoplastic constitutive equations, part I: rules developed with internal variable concept. ASME J Press Vessel Tech 34, 153-158 (1983)
4. Chaboche, J.L., Rousselier, G.: On the plastic and viscoplastic constitutive equations, part II: application of internal variable concepts to the 316 stainless steel. ASME J Press Vessel Tech 34, 159-164 (1983)
5. Chaboche, J.L.: Constitutive equations for cyclic plasticity and cyclic viscoplasticity. Int J Plast 5, 247-302 (1989)
6. Lemaitre, J., Chaboche, J.L.: Mechanics of solids materials. Cambridge University Press, London (1990)
7. Chaboche, J.L.: Cyclic viscoplastic constitutive equations, part I: a thermodynamically consistent formulation. ASME J Appl Mech 60, 813-821 (1993)
8. Chaboche, J.L.: Cyclic viscoplastic constitutive equations, part II: stored energy - comparison between models and experiments. ASME J Appl Mech 60, 822-828 (1993)
9. Chaboche, J.L., Jung, O.: Application of a kinematic hardening viscoplasticity model with thresholds to the residual stress relaxation. Int J Plast 13, 785-807 (1998)
10. Ho, K.: Modeling of nonlinear rate sensitivity by using an overstress model. Comput Model Eng Sci 2, 351-364 (2001)
11. Bodner, S.R.: Modeling, methods and applications. In: Swczuk, A., Bianchi, G. (eds.) Plasticity today. Elsevier, Amsterdam (1985)
12. Sherwood, J.A., Fay, E.M.: Application of a unified constitutive theory to the nonproportional multiaxial strain deformation of 1045 steel. ASME J Eng Mat Tech 114, 147-155 (1992)
13. Olschewski, J., Haftaoglu, C., Noack, H.D.: Inelastic finite element analysis of an internally cooled model trubine blade subjected to varying thermo-mechanical loading. In: Lütjering, G., Howack, H. (eds.) Fatigue'96, Proceedings of the sixth international fatigue congress, Berlin (1996)
14. Betten, J.: Damage tensors in continuum mechanics. J de Mechanique Theorique et Appliquee 2, 13-32 (1983)
15. Kailasam, M., Aravas, N., Castañeda, P.P.: Porous metals with developing anisotropy: constitutive models, computational issues and applications to deformation processing. Comput Model Eng Sci 1, 105-118 (2000)
16. Hayhurst, D.R., Leckie, F.E.: High temperature creep continuum damage in metals. In: Boehler, J.P. (ed.) Yielding damage and failure of anisotropic solids EGF5, pp. 445-464 (1990)
17. Betten, J., El-Magd, E., Meydanli, S.C., Palmen, P.: Untersuchung des anisotropen Kriechverhaltens vorgeschädigter Werkstoffe am austenitischen Stahl X8 CrNiMoNb 16 16. Arch Appl Mech 65, 121-132 (1995)
18. Betten, J.: Creep Mechanics, 2nd edn. Springer, Berlin Heidelberg New York (2005)
19. Lemaitre, J.: Evaluation of dissipation and damage in metals submitted to dynamic loading. In: Proceedings of ICM-1, Kyoto, Japan (1971)
20. Lemaitre, J.: A course on damage mechanics. Springer, Berlin Heidelberg New York (1996)
21. Abu Al-Rub, R.K., Voyiadjis, G.Z.: On the coupling of anisotropic damage and plasticity model for ductile materials. Int J Solids Struct 40, 2611-2643 (2003)
22. Brünig, M.: An anisotropic ductile damage model based on irreversible thermodynamics. Int J Plast 19, 1679-1713 (2003)
23. Cordebois, J.P., Sidoroff, F.: Endommagement anisotrope en élasticité et plasticité. JMTA Numéro spécial 45-60 (1982)
24. Brocks, W., Qi, W.: Numerical investigation of creep damage development in the Ni-based superalloy IN738 LC at 850°C. Comput Model Eng Sci 3, 313-320 (2002)
25. Qi, W., Bertram, A.: Anisotropic continuum damage modeling for single crystals at high temperatures. Int J Plast 15, 1197-1215 (1999)
26. Qi, W., Brocks, W., Bertram, A.: An FE-analysis of anisotropic creep damage and deformation in the single crystal SRR99 under multiaxial loads. Comput Mater Sci 19, 292-297 (2000)
27. Qi, W., Bertram, A.: Damage modeling of the single crystals superalloy SRR99 under monotonous creep. Comput Mater Sci 13, 132-141 (1998)
28. Atluri, S.N.: Alternate stress and conjugate strain measures, and mixed variational formulations involving rigid rotations, for computational analyses of finitely deformed solids, with application to plates and shells - I: theory. Comput Struct 18, 93-116 (1984)
29. Hoger, A.: The stress conjugate to logarithmic strain. Int J Solids Struct 23, 1645-1656 (1987)
30. Lin, R.C., Brocks, W.: On a finite strain viscoplastic theory based on a new international dissipation inequality. Int J Plast 20, 1281-1311 (2004)
31. Murakami, S., Ohno, N.: A continuum theory of creep and creep damage. In: Ponter, A.R.S., Hayhurst D.R. (eds.) Creep in structures. Springer, Berlin Heildelberg New York pp. 422-444 (1981)
32. Olschewski, J., Sievert, R., Meersmann, J., Ziebs, J.: Selection, calibration and verification of viscoplastic constitutive models used for advanced blading methodology. In: Nachelet et al. (eds.) High temperature materials for power engineering, pp. 1051-1060 Kluwer, Dordrecht, (1990)
33. Kobayashi, K.I., Imada, H., Majima, T.: Nucleation and growth of creep voids in circumferentially notched specimens. Int J Ser A Solids Mech Mat Eng 41, 218-224 (1998)
34. Landre, J., Pertence, A., Cetlin, P.R., Rodrignes, J.M.C., Martins, P.A.F.: On the utilisation of ductile fracture criteria in cold forging. Finite Elem Anal Des 39, 175-186 (2003)
35. Mohr, R.: Modellierung des Hochtemperaturverhaltens metallischer Werkstoffe. Dissertation, Technische Universität Hamburg-Harburg, GKSS 99/E/66 (1999)