Life-cycle performance model for FRP bridge deck panels

Civil Engineering and Environmental Science

Volumn 23, Issue 1, 2006, Pages 35-56

  Hong, Taehoon ^a   Hastak, Makarand ^b  

^a Korea Institute of Civil Engineering and Building Technology   (South Korea)

^b PURDUE UNIVERSITY   (United States)

Author keywords

Deterioration; Fiber reinforced materials; Life cycle; Monte Carlo method; Performance evaluation

Indexed keywords

DURABILITY; ENVIRONMENTAL IMPACT; EVALUATION; FIBER REINFORCED MATERIALS; LIFE CYCLE; MONTE CARLO METHODS; PERFORMANCE; SERVICE LIFE; STRUCTURAL PANELS;

BRIDGE DECK PANELS; LIFE CYCLE PERFORMANCE MODEL; PERFORMANCE EVALUATION;

BRIDGE DECKS;

BRIDGE DECKS; DURABILITY; ENVIRONMENTAL IMPACT; EVALUATION; FIBER REINFORCED MATERIALS; LIFE CYCLE; MONTE CARLO METHODS; PERFORMANCE; SERVICE LIFE; STRUCTURAL PANELS;

COMPOSITE;

EID: 33644586056     PISSN: 10286608     EISSN: None     Source Type: Journal    
DOI: 10.1080/10286600600585666     Document Type: Article

References (60)

1. American Association of State Highway and Transportation Officials (AASHTO).(1993) Guidelines for Bridge Management Systems. Washington DC: AASHTO.
2. Aktan, E. and Chase, S. and Inman, D. and Pines, D.(2001). Monitoring and managing the health of infrastructure system, in. Proceedings of SPIE, International Society for Optical Engineering, Society of Photo-Optical Instrumentation Engineers, Newport Beach, CA. In [pp. xi - xxi]..
3. Alfred, R.(1984) The effects of temperature and moisture content on the flexural response of kevlar/epoxy laminates: Part 11 45/0/[90] Filament Orientation. In Proc. Environmental Effects on Composite Materials.. Lancaster PA: Technomic Publishing Co.
4. Ando, N. and Matsukawa, H. and Hattori, A. and Mashima, M.(1997). Experimental studies on the long-term tensile properties of FRP tendons. Proceedings of 3rd International Symposium, FRPRCS-3, JC. In [pp. 203 - 210]..
5. Balázs, G. and Borosnyói, A.(2001). Long-term behaviors of FRP. Proceedings of the International Workshop, Capri, Italy. In Composites in Construction: A Reality [pp. 84 - 91]..
6. Bank, L. and Gentry, T. and Barkatt, A. (1995) Accelerated test methods to determine the long-term behavior of FRP composites structures: environmental effects J. Reinf. Plas. Comp., 14, pp. 558 - 587.
7. Busel, J. and Lockwood, J.(2000) Production Selection Guide: FRP Composite Products for Bridge Applications. Harrison NY: Market Development Alliance (MDA) of the FRP composites industry.
8. Cassity, P.Fiber-reinforce polymer bridge decks. In National Bridge Research Organization (NaBRO).. Available online at: http://www.nabro.unl.edu/articles/20000805/index.asp (accessed 25 October 2003)
9. Chin, J. and Nguyen, T. and Aouadi, K. (1997) Effects of environmental exposure on fiber-reinforced plastic (FRP) materials used in construction J. Comp. Techno. Res., 19(4), pp. 205 - 213.
10. Crowther, M. and Wyatt, R. and Philips, M. (1989) Creep-fatigue interactions in glass fibre/polyester composites Comp. Sci. Technol., 36, pp. 191 - 210.
11. Crystal Ball®.(2000) Crystal Ball 2000, 2. User Manual. Denver Colorado: Decisioneering Inc.
12. Current practices in FRP composites technology. Available online at: http://www.fhwa.dot.gov/bridge/frp/deckproj.htm (accessed 11 November 2003)
13. Datta, P. and Kwon, S. and Durell, G. and Roberto, L. and Kim, Y.(2002). Fatigue studies of FRP composites decks at 30°C and 50°C. 12th International Offshore and Polar Engineering Conference, Kitakyushu, Japan. In [pp. 26 - 31]..
14. Dutta, P.(1992). Tensile strength of unidirectional fiber composites at low temperature. Proceedings of 6th Japan-US Conference on Composites Materials. In [pp. 782 - 792]..
15. Dutta, P. and Hui, D. (1996) Low-temperature and freeze-thaw durability of thick composites Comp. Part B Eng., 27(3-4), pp. 371 - 379.
16. Dzenis, Y. (2003) Cycle-based analysis of damage and failure in advanced composites under fatigue-experimental observation of damage development within loading cycles Int. J. Fatigue, 25, pp. 499 - 510.
17. Gomez, J. and Casto, B.(1996) Freeze-thaw durability of composite materials. In Virginia Transportation Research Council, No. 96-R25.. Charlottesville VA
18. Gramoll, K. and Dillard, D. and Brinson, H. (1990) Thermoviscoelastic characterization and prediction of Kevlar/Epoxy composite laminates Comp. Mater. Testing Des., 9, pp. 477 - 493.
19. Greenwood, J. (1975) Creep and fracture of CFRP at 180-200°C Composites, 9, pp. 203 - 206.
20. Haramis, J. and Verghese, K. and Kesko, J. and Weyers, R. (2000) Characterization of freeze-thaw damage mechanisms in composites for civil infrastructure Proc. Int. SAMPE Sym. Exhibit., 45(1), pp. 402 - 413.
21. Hastak, M. and Mirmiran, A. and Richard, D. (2003) A framework for life-cycle cost assessment of composites in construction J. Reinf. Plast. Comp., 22(15), pp. 1409 - 1430.
22. Hastak, M. and Daniel, W. and Hong, T.(2004) Construability, maintainability, and operability of fiber reinforced polymer (FRP) bridge deck panels. In. West Lafayette IN: Purdue University. Joint Transportation Research Program (JTRP) Research Report SPR-2778
23. Hong, T.(2003) Evaluation of maintenance, repair, and rehabilitation strategy in concrete bridge deck. In. West Lafayette IN: Purdue University. MS Thesis
24. Hong, T.(2005) Life-cycle assessment model of composite materials in construction. PhD dissertation. In. West Lafayette IN: Purdue University.
25. Hugo, J. and Sova, M. and Cizinsky, J. (1993) Creep and creep damage of glass fibre reinforced polypropylene Comp. Struct., 24, pp. 233 - 244.
26. Jinen, E. (1989) Influence of fatigue damage on tensile creep properties of short carbon fibre reinforced nylon-6-plastic Composites, 20(4), pp. 329 - 339.
27. Karbhari, V. and Chin, J. and Hunston, D. and Benmokrane, B. and Juska, T. and Morgan, R. and Lesko, J. and Sorathia, U. and Reynaud, D. (2003) Durability gap analysis for fiber-reinforced polymer composites in civil infrastructure J. Compos. Constr., 7(3), pp. 238 - 247.
28. Karbhari, V. and Rivera, J. and Zhang, J. (2002) Low-temperature hygrothermal degradation of ambient cured e-glass/vinylester composites J. Appl. Polym. Sci., 86, pp. 2255 - 2260.
29. Karbhari, V. and Zhao, L. and Murphy, K. and Kabalnova, L.(1998). Environmental durability of glass fiber-reinforced composites-short term effects. Proceedings of 1st International Conference on durability of FRP Composites for Construction. In [pp. 513 - 524]..
30. Kumar, B. and Singh, R. and Nakamura, T. (2002) Degradation of carbon fiber-reinforced epoxy composites by ultraviolet radiation and condensation J. Comp. Mater., 36(24), pp. 2713 - 2733.
31. Liau, W. and Tseng, F. (1998) The effect of long-term ultraviolet light irradiation on polymer matrix composites Polym. Comp., 19(4), pp. 440 - 445.
32. Lopez-Anido, R. and Karbhari, V. (2000) Fiber reinforced composites in civil infrastructure Emerging Materials for Civil Infrastructure-State of the Art, pp. 41 - 78. (ASCE)
33. Luke, S. (2000) Composites gain ground in civil engineering Reinforced Plastics, pp. 34 - 42.
34. Machida, A.(1997) Recommendation for design and construction of concrete structure using continuous fiber reinforcing materials. In Jpn Soc. Civil Eng.. Tokyo
35. Mahfuz, H. and Zaman, K. and Haque, A. and Foy, C. and Mohamed, H. and Jeelani, S. (2000) Fatigue life prediction of thick-section S2-glass/ Vinyl-ester composites under flexural loading J. Eng. Mater. Technol., Trans. ASME, 122(4), pp. 402 - 408.
36. Martin Marietta Materials (MMC). Available online at: http://www.martinmarietta.com (accessed 15 November 2003)
37. McBagonluri, F. and Garcia, K. and Hayes, M. and Verghese, K. and Lesko, J. (2000) Characterization of fatigue and combined environment on durability performance of glass/vinyl ester composite for infrastructure applications Int. J. Fatigue, 22, pp. 53 - 64.
38. Moder, J. and Philips, C. and Davis, E.(1983) Project Management with CPM, PERT and Precedence Diagramming (3rd edn). New York NY: Van Nostrand Reinhold Company.
39. Mouritz, A. (2002) Post-fire flexural properties of fibre-reinforced polyester, epoxy and phenolic composites J. Mater. Sci., 37, pp. 1377 - 1386.
40. Mouritz, A. (2003) Simple models for determining the mechanical properties of burnt FRP composites Mater. Sci. Eng. A., 359(1-2), pp. 237 - 246.
41. Mouritz, A. and Mathys, Z. (1999) Post-fire mechanical properties of marine polymer composites Comp. Struct., 47(1), pp. 643 - 653.
42. Mouritz, A. and Mathys, Z. (2001) Post-fire mechanical properties of glass-reinforced polyester composites Comp. Sci. Technol., 61(4), pp. 475 - 490.
43. Neale, K. (2000) FRPs for structural rehabilitation: A survey of recent progress Proc. Struct. Eng. Mater., 2, pp. 133 - 138.
44. Nystrom, H. and Watkins, S. and Nanni, A. and Murray, S. (2003) Financial viability of fiber-reinforced polymer (FRP) bridges J. Manag. Eng., 19(1), pp. 2 - 8.
45. Panasyuk, V. and Delyavskii, M. and Berezhnitskii, L. (1987) Creep of unidirectional glass-reinforced plastics under the effect of liquid media and elevated temperatures Mekhanika Kompozitnykh Materialov, 5(9-10), pp. 910 - 914.
46. Ramey, G. and Wright, R.(1994) Assessing and enhancing the durability/ longevity performances of highway bridges. In. Alabama: Auburn University. Final Report on Highway Research Record. Ctr. Proj. 2-13506
47. Reeve, S.(2001) FRP composite bridge decks: Barriers to market development. In Proc. Polym. Comp. II.. Morgantown WV
48. Richard, D.(2003) Life-cycle performance model for composites in civil infrastructure.. University of Cincinnati. MS thesis
49. Richard, D. and Hong, T. and Hastak, M. and Mirmiran, A. and Salem, O.(2005a) Material damage modeling in FRP composites and reinforced concrete. In Composites Part B: Engineering.. in press
50. Richard, D. and Hong, T. and Hastak, M. and Mirmiran, A. and Salem, O.(2005b) Life-cycle performance model for composites in construction. In Composites Part B: Engineering.. in press
51. Rivera, J. and Karbhari, V.(2002) Cold-temperature and simultaneous aqueous environment related degradation of carbon/vinylester composites. In Comp. Part B Eng. (pp. 17 - 24).
52. Seible, F. and Karbhari, V. (1996) Advanced composites build on success Civil Eng. ASCE, 66(8), pp. 44 - 47.
53. Signor, A. and VanLaningham, M. and Chin, J. (2003) Effects of ultraviolet radiation exposure on vinylester resins: Characterization of chemical, physical and mechanical damage Polym. Degrad Stabil., 79(2), pp. 359 - 368.
54. Sorathia, U. and Beck, C. and Dapp, T. (1993) Residual strength of composites during and after fire exposure J. Fire Sci., 11(3), pp. 225.
55. Springer, G.(1998) Environmental effect. In Environmental effects on composite materials. (pp. 1 - 34). Lancaster PA: Technomic Pub. Co. Inc.
56. Steckel, G. and Hawkins, G. and Bauer, J., Jr.(1999). Durability issues for composites in infrastructure. Proceedings of 44th International SAMPE Symposium and Exhibition, Soc. For the Advancement of Material and Process Engineering, Long Beach, CA. In [pp. 2194 - 2208]..
57. Sun, C. and Chin, E. (1981) Fatigue retardation due to creep in a fibrous composite Fatigue of Fibrous Composite Materials, pp. 233 - 242. (ASTM STP 723)
58. Tuner, D. and Richardson, J. and Wong, K.(1991) Development of bridge deterioration models for the ABIMS. In Interim Report Number 3, Bureau of Engineering Report 548-39.. Tuscaloosa Alabama: University of Alabama.
59. Waldron, P. and Byars, E. and Dejke, V.(2001) Durability of FRP in concrete: A state of the art. In Composites in Construction: A Reality: Proceedings of the international workshop. (pp. 92 - 99). Capri
60. Watanabe, M.(1979). Effect of water environment of fatigue behavior of fiberglass reinforced plastics.. In Composite Materials: Testing and Design (5th Conference) [pp. 345 - 367].. In