Strain measurements in asphalt concrete specimens towards the development of a fracture model

International Journal of Pavement Engineering

Volumn 2, Issue 4, 2001, Pages 243-258

  Uzan, Jacob ^a   Levenberg, Eyal ^a  

^a TECHNION ISRAEL INSTITUTE OF TECHNOLOGY   (Israel)

Author keywords

Cohesive crack model; Fracture; Local strain; RVE; Softening

Indexed keywords

AGGLOMERATION; ASPHALT; ASPHALT CONCRETE; CONCRETES; CRACKS; DAMAGE DETECTION; SOFTWARE TESTING; TESTING;

COHESIVE CRACK MODELING; CONCRETE SPECIMENS; DAMAGE LOCALIZATION; LOCAL STRAINS; LOCAL SURFACE STRAINS; REPRESENTATIVE VOLUME ELEMENT (RVE); RVE; SOFTENING;

FRACTURE;

EID: 33644567780     PISSN: 10298436     EISSN: 1477268X     Source Type: Journal    
DOI: 10.1080/10298430108901730     Document Type: Article

References (33)

1. Barenblatt, G. I. (1962) The Mathematical Theory of Equilibrium Cracks in Brittle Fracture. Advances in Applied Mechanics, Academic Press, Vol. VII, pp. 55-129.
2. Barpi, F. and Valente, S. (1998) Size-Effects Induced Bifurcation Phenomena During Multiple Cohesive Crack Propagation. International Journal of Solids and Structures, Vol. 35, No. 16, pp. 1851-1861.
3. Bazant, Z. P. (1985) Fracture in Concrete and Reinforced Concrete. in Mechanics of Geomaterials: Rocks, Concretes, soils. Bazant, Z. P., Ed., John Wiley and Sons.
4. Bazant, Z. P. and Cedolin, L. (1993) Why Direct Tension Test Specimens Break Flexing to the Side. Journal of Structural Engineering, ASCE, Vol. 119,No.4,pp. 1101-1113.
5. Bazant, Z. P. and Planas, J. (1998) Fracture and Size Effect in Con-crete and Other Quasibrittle Materials. CRC Press LC.
6. Cedolin, L. Dei Poli, S., and Iori, I. (1983) Experimental Determination of the Fracture Process Zone in Concrete. Cement and Concrete Research, Vol. 13, pp. 557-567.
7. Cedolin, L., Dei Poli, S. and Iori, I. (1987) Tensile Behavior of Concrete, Journal of Engineering Mechanics, ASCE, Vol. 113, No. 3, pp. 431-449.
8. Cho, K. Z. Kobayashi, A. S., Hawkins, N. M., Barker, D. B. and Jeang, F. L. (1984) Fracture Process Zone of Concrete Cracks. Journal of Engineering Mechanics, ASCE, Vol. 110, No. 8, pp. 1174-1184.
9. Dugdale, D. S. (1960) Yielding in Steel Sheets Containing Slits. Journal of the Mechanics and Physics of Solids, Vol. 8, pp. 100-108.
10. FHWA, (1998) Fundamental Properties of Asphalts and Modified Asphalts. Task K - Microdamage Healing in Asphalt and Asphalt Concrete, Final Report, Vol. 2.
11. Ha, K. (1996) Evaluation of a three-Dimensional Vtscoelastic Constitutive Model of Solid Propellant with Distributed Damage. Doctoral Dissertation, University of Texas & Austin.
12. Hashin, Z. (1964) Theory of Mechanical Behavior of Heterogeneous Media. Applied Mechanics Reviews, Vol. 17. No. 1.
13. He, S., Feng, Z. and Rowlands, R. E. (1997) Fracture Process Zone Analysis of Concrete Using Moir lnterferometry. International Journal of Experimental Mechanics, vol. 37, No, 3.
14. Hillerborg, A., Modeer, M. and Petersson, P. E. (1976) Analysis of Crack Formation and Crack Growth in Concrete by Means of Fracture Mechanics and Finite Elements. Cement and Concrete Research, Vol. 6, pp. 773-782.
15. Jacobs, M. M. J. De Bondt, A. H., Molenaar. A. A. A. and Hop-man, P. C. (1992) Cracking in Asphalt Concrete Pavements. Proceedings of the 7th International Conference on Asphalt Pavements (ISAP), Vol. 1 (Design).
16. Jacobs, M. M. J., Hopman, P. C. and Molenaar, A. A. A. (1996) Application of Fracture Mechanics Principles to Analyze Cracking in Asphalt Concrete. Proceedings of the Association of Asphalt Paving Technologists, Vol. 65.
17. Jankowski. L. J. and Stys, D. J. (1990) Formation of the Fracture Process Zone in Concrete. Engineering Fracture Mechanics, Pergamon Press PLC, Vol. 36, No. 2, pp. 245 - 253.
18. Jenq, Y. S. and Perng, J. D. (1991) Analysis of Crack Propagation in Asphalt Concrete Using Cohesive Crack Model. Transportation Research Board, National Research Council, Transportation Research Record 1317, pp. 90-99.
19. Jenq, Y. S., Liaw, C. J. and Kim, S. C. (1993a) Effects of Temperature on Early Crack Formation in Portland Cement Concrete Pavements. Transportation Research Board, National Research Council, Transportation Research Record 1388, pp. 35.
20. Jenq, Y. S., Liaw, C. J. and Liu. P. (1993b) Analysis of Crack Resistance of Asphalt Concrete Overlays - A Fracture Mechanics Approach. Transportation Research Board, National Research Council, Transportation Research Record 1388, pp. 160-166.
21. Kim, Y. R, Lee, H. J. and Little. D. N. (1997) Fatigue Characterization of Asphalt Concrete Using Viscoelasticity and Continuum Damage Theory. Proceedings of the Association of Asphalt Paving Technologists, Vol. 66.
22. Kunst, P. A. J. C. and Kirschner, R. (1993) Investigations on the Effectiveness of Synthetic Asphalt Reinforcements, in Reflective Cracking in Pavements, Rigo, J. M., Degeimbre, R. and Francken, L., Ed., RILEM.
23. Molcnuur. A. A. A. and Nods, M. (1996) Design Method for Plain and Geogrid Reinforced Overlays on Cracked Pavements, in Reflective Cracking in Pavements, Francken, L. Beuving, E. and Molenaar, A. A. A. Ed., RILEM.
24. Pctcrsson, P.E. (1980a) Fracture Energy of Concrete: Method of Determination. Cement and Concrete Research, Vol. 10, pp. 78-89.
25. Pctcrsson, P. E. (1980b) Fracture Energy of Concrete: Practical Performance and Experimental Results. Cement and Concrete Research. Vol. 10, pp. 91-101.
26. Ramsamooj, D. V. (1994) Fatigue Cracking and Rutting in Flexible Pavements, in Fracture Mechanics Applied to Geoiechnical Engineering, Vallejo, L. E. and Liang, R. Y., Ed, ASCE, Geoiechnical Special Publicalion No. 43, pp. 132-146.
27. Read, J. M. (1999) New Method for Measuring Crack Propagation in Asphalt. The International Journal of Pavement Engineering. Vol. 1, No. 1.
28. Rots, Z. G. and de Borst, R. (1987) Analysis of Mixed-Mode Fracture in Concrete. Journal of Engineering Mechanics, ASCE, Vol. 113, No. 11, pp. 1739-1758.
29. Rots, J. G. and de Borst, R. (1989) Analysis of Concrete in Direct Tension, International Journal of Solids and Structures, Vol. 25, No. 12, pp. 1381-1394.
30. Wecharatana. M. and Shah. S. P. (1983) Predictions of Nonlinear Fracture Process Zone in Concrete. Journal of Engineering Mechanics, ASCE, Vol. 109, No. 3, pp. 1231-1246.
31. Witczak, M. W. and Superpave Models Team Invesligators (1999) Advanced AC Mixture Material Characterization Models Framework and Laboratory Test Plan - Final Report. Super-pave Support and Performance Models Management, NCHRP 9-19, SubtaskF. 2.
32. Witczak, M. W., Bonaquist, R, Von Quintus, H. and Kaloush, K. (2000) Specimen Geometry and Aggregate Size Effects in Uniaxial Compression and Constant Height Shear Tesls, Association of Asphalt Paving Technologists, Preprint from the Annual Meeting and Technical Sessions.
33. Wium, D. J. W. Buyukozturk, O. and Li, V. C, (1984) Hybrid Model for Discrete Cracks in Concrete. Journal of Engineering Mechanics, ASCE, Vol. 110, No. 8, pp. 1211-1229.