Direct observations of the α → γ transformation at different input powers in the heat-affected zone of 1045 C-Mn steel Arc welds observed by spatially resolved X-ray diffraction

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 36, Issue 12, 2005, Pages 3353-3369

  Palmer, T A ^a   Elmer, J W ^a  

^a LAWRENCE LIVERMORE NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AUSTENITE; ELECTRIC ARC WELDING; FERRITE; HEAT AFFECTED ZONE; METALLOGRAPHIC MICROSTRUCTURE; WELDS; X RAY DIFFRACTION ANALYSIS;

AUSTENITIC MICROSTRUCTURE; GAS TUNGSTEN ARC (GTA) WELDING; SPATIALLY RESOLVED X-RAY DIFFRACTION (SRXRD);

STEEL;

EID: 33644503544     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-005-0010-x     Document Type: Article

References (41)

1. G.R. Speich, V.A. Demarest, and R.L. Miller: Metall. Trans. A, 1981, vol. 12A, pp. 1419-28.
2. A. Jacot, M. Rappaz, and R.C. Reed: Acta Mater., 1998, vol. 46 (11), pp. 3949-62.
3. A. Jacot and M. Rappaz: Acta Mater., 1997, vol. 45 (2), pp. 575-85.
4. A. Jacot and M. Rappaz: Acta Mater., 1998, vol. 47 (5), pp. 1645-51.
5. C. Atkinson, T. Akbay, and R.C. Reed: Acta Metall. Mater., 1995, vol. 43 (5), pp. 2013-31.
6. D. Gaude-Fugarolas and H.K.D.H. Bhadeshia: J. Mater. Sci., 2003, vol. 38, pp. 1195-1201.
7. F.G. Caballero, C. Capdevila, D. San Martín, and C. García De Andrés: in Austenite Formation and Decomposition, E.B. Damm and M. Merwin, eds., ISS/TMS, Warrendale, PA, 2003, pp. 457-74.
8. C.R. Brooks: Principles of the Austenitization of Steels, Kluwer Academic Publishers, Dordrecht, 1992.
9. S. Estay, L. Chengji, and G.R. Purdy: Can. Metall. Q., 1984, vol. 23 (1), pp. 121-30.
10. R.C. Reed, T. Akbay, Z. Shen, J.M. Robinson, and J.H. Root: Mater. Sci. Eng. A, 1998, vol. 256, pp. 152-65.
11. T. Akbay, R.C. Reed, and C. Atkinson: Acta Metall. Mater., 1994, vol. 47 (4), pp. 1469-80.
12. Z. Shen, T. Akbay, J.P. Bourne, and R.C. Reed: in Trends in Welding Research, H.B. Smartt, J.A. Johnson, and S.A. David, eds., ASM INTERNATIONAL, Materials Park, OH, 1996, pp. 217-22.
13. M. Hillert, K. Nilsson, and L.-E. Törndahl: J. Iron Steel Inst., 1971, vol. 209, pp. 49-66.
14. M. Nemoto: Metall. Trans. A, 1977, vol. 8A, pp. 431-37.
15. K. Easterling: Introduction to the Physical Metallurgy of Welding, 2nd ed., Butterworth-Heinemann, Oxford, United Kingdom, 1992.
16. S. Kou: Welding Metallurgy, 2nd ed., Wiley-Interscience, Hoboken, NJ, 2003.
17. J.W. Elmer, T.A. Palmer, and S.S. Babu: Adv. Mater. Processing, 2002, vol. 160 (11), pp. 23-26.
18. J.W. Elmer, J. Wong, and T. Ressler: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2761-73.
19. Z. Yang, J.W. Elmer, J. Wong, and T. DebRoy: Welding J., 2000, vol. 79 (4), pp. 97s- 111s.
20. J.W. Elmer, J. Wong, and T. Ressler: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1175-88.
21. J.W. Elmer, J. Wong, and T. Ressler: Scripta Mater., 2000, vol. 43 (8), p. 751-57.
22. T.A. Palmer, J.W. Elmer, and J. Wong: Sci. Technol. Welding Joining, 2002, vol. 7 (3), pp. 159-71.
23. J.W. Elmer, T.A. Palmer, W. Zhang, B. Wood, and T. DebRoy: Acta Mater., 2003, vol. 51, pp. 3333-49.
24. W. Zhang, J.W. Elmer, and T. DebRoy: Scripta Mater., 2002, vol. 46, pp. 753-57.
25. W. Zhang, J.W. Elmer, and T. DebRoy: Mater. Sci. Eng. A, 2002, vol. 333 (1-2), pp. 320-35.
26. J.W. Elmer, T.A. Palmer, and J. Wong: J. Appl. Phys., 2003, vol. 93 (4), pp. 1941-47.
27. J.W. Elmer, T.A. Palmer, S.S. Babu, W. Zhang, and T. DebRoy: Welding J., 2004, vol. 83 (9), pp. 244s-53s.
28. V. Karpenko, J.H. Kinney, S. Kulkarni, K. Neufeld, C. Poppe, K.G. Tirsell, J. Wong, J. Cerino, T. Troxel, J. Yang, E. Hoyer, M. Green, D. Humpries, S. Marks, and D. Plate: Rev. Sci. Instrum., 1989, vol. 60, pp. 1451-60.
29. B.D. Cullity and S.R. Stock: Elements of X-Ray Diffraction, 3rd ed., Prentice-Hall, Upper Saddle River, NJ, 2001.
30. S.A. David and T. DebRoy: Science, 1992, vol. 257, pp. 497-502.
31. T. DebRoy and S.A. David: Rev. Mod. Phys, 1995, vol. 67 (1), pp. 85-112.
32. K. Mundra, T. DebRoy, and K.M. Kelkar: Num. Heat Transfer A, 1996, vol. 29, pp. 115-29.
33. Z. Yang and T. DebRoy: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 483-93.
34. Smithells Metals Reference Book, 7th ed., E.A. Brandes, ed., Butterworth and Heinemann, London, 1992.
35. M.W. Chase, Jr., C.A. Davies, J.R. Downey, Jr., D.J. Frurip, R.A. Mcdonald, and A.N. Syverud: JANAF Thermochemical Tables, 3rd ed., American Chemical Society and American institute for Physics, Washington, DC, 1985.
36. J. Wong, T. Ressler, and J.W. Elmer: J. Synchrotron Rad, 2003, vol. 10, pp. 154-67.
37. T.A. Palmer and J.W. Elmer: Scripta Mater., 2005, vol. 53, pp. 535-40.
38. L. Cheng, A. Böttger, T.H. de Keijser, and E.J. Mittemeijer: Scripta Metall. Mater., 1990, vol. 24, pp. 509-14.
39. M. Onink, C.M. Brakman, F.D Tichelaar, E.J. Mittemeijer, S. van der Zwaag, J.H. Root, and N.B. Konyer: Scripta Metall. Mater., 1993, vol. 29, pp. 1011-16.
40. D.J. Dyson and B. Holmes: J. Iron Steel Inst., 1970, vol. 208, pp. 469-74.
41. S.S. Babu: Oak Ridge National Laboratory, Oak Ridge, TN, private communication, 2005.