Effect of C, Mn, P and Processing Conditions on Mechanical Properties and Recrystallization Temperatures of High Strength Cold-Rolled Low Carbon Steels

37th Mechanical Working and Steel Processing Conference Proceedings

Volumn , Issue , 1996, Pages 951-960

  Yao, Z ^a   Zuidema, B K ^a  

^a Natl Steel Corp   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ANNEALING; COLD ROLLED STEEL; COLD ROLLING; HIGH STRENGTH STEEL; METAL CLADDING; RECRYSTALLIZATION (METALLURGY); STEEL SHEET;

ALLOY ELEMENT; ANNEALING SIMULATIONS; ANNEALING TEMPERATURES; COLD-ROLLED; HIGH-STRENGTH; LOW-CARBON STEELS; OPTIMAL ANNEALING; PROCESSING CONDITION; RECRYSTALLIZATION TEMPERATURES; THIN SHEET;

LOW CARBON STEEL;

EID: 3342876895     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (31)

1. H. Takechi: "Metallurgical Aspects on Interstitial Free Sheet Steel from Industrial Viewpoint", ISIJ International, Vol.34, 1994, No. 1, pp.1-8.
2. S.K. Chang and Y.B. Park: "Effect of Phosphorus on Recrystallization Texture in Ti-Stabilized High Strength Sheet Steels", 1994 High-Strength Steels for Automotive Symposium Proceedings, pp. 195-200.
3. R. Pradhan: "Cold-Rolled Interstitial-Free Steels: A Discussion of Some Metallurgical Topics", International Forum For Physical Metallurgy of IF Steel, 1994, Tokyo, pp.165-178.
4. L. Meyer, W. Bleck and W. Muschenborn: "Product-Oriented EF Steel Design", International Forum For Physical Metallurgy of IF Steel, 1994, Tokyo, pp.203-222.
5. K. Ushioda, N. Yoshinaga, K. Koyama, and O. Akisue: "Application of Ultra-low Carbon Steels to the Development of Supperformable Sheet Steels, Solution-hardened High Strength Sheet Steels and Bake-Hardenable Sheet Steels", International Forum For Physical Metallurgy of IF Steel, 1994, Tokyo, pp.227-244.
6. Y.S. Hwang and H.C. Chen: "Effect of Nb Content on Deep Drawability of Nb and Ti-added Extra-Low-Carbon Cold-Rolled Sheet Steel", International Symposium on Low-Carbon Steels for the 90's, Edited by R. Asfahani and G. Tither, pp.475-480.
7. J.R. Fekete, D.C. Strugala and Z. Yao: "Advanced Sheet Steels for Automotive Applications", JOM, vol. 44, No. 1, January, 1992, pp. 17-21.
8. L.W. Zhang and T. Bensinger: "Hot Dip Galvannealing of IF Steel Strengthened by Manganese", Galvatech '95, Chicago, September, 1995, to be published.
9. 2 Grade Ultra-low Carbon Sheet Steel for Automotive Panels", 1992 SAE Paper 920248.
10. Z. Fu, K. Zhang and S. Zhao: "Characteristics of Deep Drawing High Strength Cold-Rolled Phosphorus Bearing Automotive Steel Sheets", Iron and Steel, 1991, vol. 26, No.7, pp.48-51.
11. N. Prum, U. Meers, H. Mathy, P. Messien and V. Leroy: "Influence of the Hot-Rolled Thermal History on the Drawability of Continuously Annealed Sheet Steel", Hot-Cold-Rolled Sheet Steels, TMS, 1988, pp.3-23.
12. W.B. Hutchinson and K. Ushioda: "Texture Development in Continuous Annealing", Scand J. Metall., 13, 1984, pp.269-275.
13. F. Moussy, M. Munier and C. Brun: "Research Of The Optimum Between Texture Improvement And Carbide Coarsening For Cold-Rolled Continuously-Annealed Sheet Steels", Hot-Cold-Rolled Sheet Steels, TMS, 1988, pp.25-39.
14. R. Pradhan and J.J Battisti: "Continuously Annealed Drawing-Quality Steel: Effect Of Chemistry And Processing Conditions", Hot-Cold-Rolled Sheet Steels, TMS, 1988, pp.41-56.
15. J.S.H. Lake, G. Mu Sung, W.A. Renshaw and D.J. Willis: "Recrystallization And Grain Growth Kinetics During Galvanizing Heat Treatments For Continuously Cast Steel", Hot-Cold-Rolled Sheet Steels, TMS, 1988, pp.233-254.
16. K. Matsudo, K. Osawa and K. Kurihara: "Metallurgical Aspects Of The Development Of Continuous Annealing Technology At Nippon Kokan", Technology of Continuously Annealed Cold-Rolled Sheet Steel, TMS 1985, pp.3-36.
17. H. Katoh, H. Takechi, N. Takahashi and M. Abe: "Cold-Rolled Steel Sheets Produced by Continuous Annealing", Technology of Continuously Annealed Cold-Rolled Sheet Steel, TMS 1985, pp.37-58.
18. Y. Hosoya, H. Kobayashi, T. Shimomura: K. Matsudo and K. Kurihara: "Effect of Morphology Change of Fine Carbide Precipitates On The Ductility Of Continuously Annealed Mild Steel Sheets", Technology of Continuously Annealed Cold-Rolled Sheet Steel, TMS 1985, pp.61-77.
19. 2 Tensile Strength, Highly Formable Cold-Rolled Low Carbon Steel by α+γ Phase Annealing", SAE Paper 950377, 1995, pp. 1-11.
20. K. Kurihara and K. Nakaoka: "Effect Of Chemical Composition And Overaging Condition On The Carbide Precipitation In Continuous Annealing", Technology of Continuously Annealed Cold-Rolled Sheet Steel, TMS 1985, pp.95-110.
21. B. Seter and U. Bergstrom: "Extra Deep-Drawing Quality Steels By Continuous Annealing", Technology of Continuously Annealed Cold-Rolled Sheet Steel, TMS 1985, pp.111-121.
22. A. Okamoto and N. Mizui: "Effect Of Cooling Condition OF Hot Roll On The Recrystallization Texture Development During Rapid Annealing", Technology of Continuously Annealed Cold-Rolled Sheet Steel, TMS 1985, pp.139-150.
23. R. Pradhan: "Effect Of Nitride Formers (B, Zr, Ti) On The Mechanical Properties Of Continuously Annealed Low-Carbon Steel Sheet", Technology of Continuously Annealed Cold-Rolled Sheet Steel, TMS 1985, pp. 185-202.
24. K. Seto, K. Okuda and K. Sakata: "High Formable Ultra Low Carbon High Strength Sheet Steels for Automotive Body Panels", 1994 High-Strength Steels for Automotive Symposium Proceedings, pp.201-208.
25. N. Yoshinaga, K. Ushioda and O. Akisue: "Development of Deep-Drawable and Bake-Hardenable High-Strength Ultra Low-C Steel Sheets by (α+γ) or γ Phase Annealing", 1994 High-Strength Steels for Automotive Symposium Proceedings, pp. 149-158.
26. S. Okada, S. Satoch, T. Kato and J. Takasaki: "New Ultra Low Carbon Complex Phase Cold-Rolled Sheet Steel Bearing Nb-B", 1994 High-Strength Steels for Automotive Symposium Proceedings, pp.233-238.
27. H.C. Chen: "Development of a 1000 MPa High-Strength High-Ductility Cold-Rolled Steel Sheet", SEAISI Quarterly, April 1991, pp.44-49.
28. A. Itami, M. Tahashi and K. Ushioda: "Cold-Rolled High-Strength TRIP Sheet Steels and Plastic Stability of Their Retained Austenite", 1994 High-Strength Steels for Automotive Symposium Proceedings, pp.245-254.
29. K. Sugimoto and M. Kobayashi: "Warm Stretch-Formability of TRIP-Aided Dual-Phase Sheet Steels", 1994 High-Strength Steels for Automotive Symposium Proceedings, pp.255-265.
30. Y. Hosoya, T. Suzuki and A. Nishimoto: "Effect of the Purification of Interstitial Elements on the Metallurgical Aspects of Continuously Annealed Ultra-Low Carbon Steel Sheets", Metallurgy of Vacuum-Degassed Steel Products, Edited by R. Pradhan, 1990, pp. 291-308.
31. Z. Yao: "Precipitation Behavior of Ti, Nb, V Microalloys in HSLA 80 KSI Hot-Rolled Product", 36th Mechanical Working & Steel Processing, TMS, October 16-19, 1994, pp.37-44.