Micro-metallurgy of splats: Theory, computer simulation and experiment

JSME International Journal, Series B: Fluids and Thermal Engineering

Volumn 48, Issue 3, 2006, Pages 366-380

  Solonenko, Oleg Pavlovich ^a   Kudinov, Vladimir Vladimirovich ^b   Smirnov, Andrey Vladimirovich ^a   Cherepanov, Anatoly Nikolaevich ^a   Popov, Vladimir Nikolaevich ^a   Mikhalchenko, Alexander Anatol'yevich ^a   Kartaev, Evgeny Vladimirovich ^a  

^a KHRISTIANOVICH INSTITUTE OF THEORETICAL AND APPLIED MECHANICS   (Russian Federation)

^b BAIKOV INSTITUTE OF METALLURGY AND MATERIALS SCIENCE   (Russian Federation)

Author keywords

Collision; Cooling; Melt; Micro droplet; Solidification; Splat formation; Spreading; Substrate

Indexed keywords

ATOMIZATION; COMPUTER SIMULATION; COOLING; DROP FORMATION; MELTING; PHASE DIAGRAMS; PLASMA SPRAYING; POWDERS; RAPID SOLIDIFICATION; SURFACE PROPERTIES;

COLLISION; MICRODROPLETS; MICROMETALLURGY; SPLAT FORMATION; SPREADING;

METALLURGY;

ATOMIZATION; COMPUTER SIMULATION; COOLING; DROP FORMATION; MELTING; METALLURGY; PHASE DIAGRAMS; PLASMA SPRAYING; POWDERS; RAPID SOLIDIFICATION; SURFACE PROPERTIES;

EID: 33344455170     PISSN: 13408054     EISSN: None     Source Type: Journal    
DOI: 10.1299/jsmeb.48.366     Document Type: Review

References (55)

1. Trapaga, G. and Szekely, J., Mathematical Modeling of the Isothermal Impingement of Liquid Droplets in Spray Processes, Metal. Trans., Vol. B22 (1991), pp.901-914.
2. Rein, M., Phenomena of Liquid Drop Impact on Solid and Liquid Surfaces, Fluid Dynamics Research, No.12 (1993), pp.61-93.
3. Hayes, D.J., Wallace, D.B., Boldman, M.T. and Marusak, R.M, Picoliter Solder Droplet Dispensing, Int. J. Microcircuits and Electronic Packaging, Vol.16 (1993), pp.173-180.
4. Gao, F. and Sonin, A.A., Precise Deposition of Molten Microdrops: The Physics of Digital Microfabrication, Proc. of Royal Society, London, No.444, A (1994), pp.533-554.
5. Solonenko, O.P., State-of-the Art of Thermophysical Fundamentals of Plasma Spraying, Thermal Plasma and New Materials Technology Vol.2. Investigation and Design of Thermal Plasma Technologies, Edited by Solonenko, O.P. and Zhukov, M.F., (1995), pp.7-96, Cambridge Interscience Publishing, Cambridge, England.
6. Pasandideh-Fard, M., Qiao, Y.M., Chandra, S. and Mostaghimi, J., Capillary Effects during Droplet Impact on Solid Surface, Physics of Fluids, Vol.8 (1996), pp.650-659.
7. Zhao, Z., Poulikakos, D. and Fukai, J., Heat Transfer and Fluid Dynamics during the Collision of a Liquid Droplet on a Substrate-1. Modeling, Int. J. of Heat and Mass Transfer, Vol.39, No.13 (1996), pp.2771-2789.
8. Waldvogel, J.M. and Poulikakos, D., Solidification Phenomena in Picoliter Size Solder Droplet Deposition on a Composite Substrate, Int. J. of Heat and Mass Transfer, Vol.40 (1997), pp.295-309.
9. Mostaghimi, J., Modeling Droplet Impact in Plasma Spray Process, Pure and Applied Chemistry, Vol.70, No.6 (1998), pp.1209-1215.
10. Solonenko, O.P. and Smirnov, A.V., Collision of Metallic Droplet with a Surface. Theory and Model Experiment, Dokl. RAN, (in Russian), Vol.363, No.1 (1998), pp.46-49.
11. Hayes, D.J. and Wallace, D.B., Solder Jet Printing: Water Bumping and CSP Applications, Chip Scale Review, Vol.2 (1998), pp.75-80.
12. Sobolev, V.V. and Guilemany, J.M., Flattening of Droplets and Formation of Splats in the Thermal Spraying: A Review of Recent Work - Part 1, J. of Thermal Spray Technology, Vol.8, No.1 (1999), pp.87-101.
13. Sobolev, V.V. and Guilemany, J.M., Flattening of Droplets and Formation of Splats in the Thermal Spraying: A Review of Recent Work - Part 2, J. of Thermal Spray Technology, Vol.8, No.2 (1999), pp.301-314.
14. Aziz, S.D. and Chandra, S., Impact, Recoil and Splashing of Metal Droplets, Int. J. of Heat and Mass Transfer, Vol.43 (2000), pp.2841-2857.
15. Predtechensky, M.R., Varlamov, Yu.D., Ul'yankin, S.N., Cherepanov, A.N. and Popov, V.N., Spreading and Solidification of Molten Microdrops Deposited on a Substrate at Moderate Weber Numbers, J. Eng. Thermophys., Vol.11, No.1 (2002), pp.83-103.
16. Solonenko, O.P., Theory of Ceramic Splat Formation under Plasma Spraying, Int. J. of High Temp. Mat. Processes, Vol.7, No.2 (2003), pp.187-194.
17. Fauchais, P., Understanding Plasma Spraying, J. Phys. D: Appl. Phys., Vol.37 (2004), pp.R86-R108.
18. Salli, L.V., Crystallization under Rapid-Cooling Conditions, (in Russian), (1972), Naukova Dumka, Kiev.
19. Solonenko, O.P., Shurina, E.P. and Golovin, A.A., Finite-Element Modeling the Impact of Melted Particle with Substrate under Plasma Spraying, Physical Mesomechanics, Vol.4, No.1 (2001), pp.29-42.
20. Popov, V.N., Modeling of a Metallic Drop Solidification on a Solid Substrate, Matematicheskoye Modelirovaniye, (in Russian), Vol.13, No.9 (2001), pp.119-127.
21. Solonenko, O.P., Klimyenov, V.A., Partin, S.V., Smirnov, A.V., Butov, V.G., Nekhoroshkov, O.N. and Bezborodov, V.P., Role of the Interface Boundaries under Formation of Splats and Structure of Coatings, Physical Mesomechanics, Vol.2, No.1-2 (1999), pp.113-129.
22. Zhukov, M.F., Solonenko, O.P. and Fedorchenko, A.I., Equilibrium Crystallization of Melted Particles on Surface under Plasma Spraying, Dokl. Akad. Nauk SSSR, (in Russian), Vol.314, No.2 (1990), pp.369-374.
23. Solonenko, O.P. and Fedorchenko, A.I., Dynamics of Processes of Melted Particles Crystallization during Their Interaction with a Surface, Sibirskii Fiziko-Tekhnicheskii Zhurnal, (in Russian), Vol.1 (1991), pp.109-117.
24. Solonenko, O.P., Fundamental Problems of Plasma Spraying, Thermal Spray: International Advances in Coating Technology, (1992), pp.787-792, ASM International, USA.
25. Solonenko, O.P., Alkhimov, A.P., Marusin, V.V., Orishich, A.M., Rakhimyanov, Kh.M., Salimov, R.A., Shchukin, V.G. and Kosarev, V.F., High Energy Processes of Materials Treatment, (in Russian), (2000), pp.63-163, Siberian Publishing House of RAS, Nauka, Novosibirsk.
26. Solonenko, O.P. and Smirnov, A.V., Conjugate Heat Transfer and Phase Transitions during a Metallic Drops Flattening and Solidificatin on a Substrate, Proc. of the 3rd European Congress on Thermal Plasma Processes, Aachen, Germany, (1995), pp.413-426.
27. Solonenko, O.P., Thermophysical Foundations of Plasma Coatings Formation from Oxide Powders, Physical Mesomechanics, Vol.4, No.6 (2001), pp.45-56.
28. Solonenko, O.P., Mikhalchenko, A.A., Kartaev, E.V., Bondar, M.P., Ogawa, K., Shoji, T. and Tanno, M., Model Theoretical and Experimental Study of Coating - Substrate Interface Formation under Plasma Spraying of Thermal Barriers, Materials Transactions, Vol.44, No.11 (2003), pp.2311-2321.
29. Solonenko, O.P., Shurina, E.P. and Gobysh A.V., New Approach to Computer-Aided Design and Optimization the Plasma Spray Process: Concept and Software, Progress in Plasma Processing of Materials 2003, Edited by Fauchais, P., (2003), pp.431-438, Begell House, Inc., New York, USA.
30. Madejski, J., Solidification of Droplets on a Cold Surface, J. Heat Mass Transfer, Vol.19 (1976), pp.1009-1013.
31. Liu, H., Lavernia, E.J. and Rangel, R.H., Numerical Simulation of Impingement of Molten Ti, Ni and W Droplets on Flat Substrate, J. Thermal Spray Technology, Vol.2 (1993), pp.369-378.
32. Bertagnolli, M., Marchese, M., Jacucci, G., Doltsinis, I.St. and Noelting, S., Thermomechanical Simulation of the Splashing of Ceramic Droplets on a Rigid Substrate, J. Computational Physics, Vol.133 (1997), pp.205-221.
33. Yoshida, T., Development of an Integrated Fabrication Process for Solid Oxide Fuel Cells by Using Novel Plasma Spraying, Energy Conversation and Utilization with High Efficiency, C: Science and Technology for Energy Conversation, CO1-17, Dec. (1990), pp.99-104.
34. Watanabe, T., Kuribayashi, I., Honda, T. and Kanzawa, A., Deformation and Solidification of a Droplet on a Cold Substrate, Chem. Eng. Sci., Vol.47, No.12 (1992), pp.3059-3065.
35. Montavon, G. and Coddet, C., Heuristic Modelling of Thermally Sprayed Powder Splat Characteristics, Proc. of the 8th National Thermal Spray Conf., Houston, Texas, (1995), pp.225-230.
36. Jones, H., Cooling, Freezing and Substrate Impact of Droplets Formed by Rotary Atomization, J. Phys. D: Appl. Phys., Vol.4 (1971), pp.1657-1660.
37. Gasin, D.A. and Uryukov, B.A., Dynamics of a Liquid Particle Interaction with Substrate, Izvestiua SB Academy of Sciences of the USSR, (in Russian), Ser. Tech. Sci., Vol.3, No.16 (1986), pp.95-100.
38. Chandra, S. and Avedisian, C.T., On the Collision of a Droplet with a Solid Surface, Proc. R. Soc., London, Ser. A, Vol.432 (1991), p.13.
39. Kurokawa, M. and Toda, S., Heat Transfer of an Impacted Single Droplet on the Wall, Proc. ASME/JSME Therm. Eng. Joint Conf., Vol.2 (1991), pp.141-146.
40. Cheng, L., Dynamic Spreading of Drops Impacting onto a Solid Surface, Ind. Eng. Chem. Process Des. Dev., Vol.16. No.2 (1977), pp.192-197.
41. McPherson, R., The Relationship between the Mechanism of Formation, Microstructure and Properties of Plasma-Sprayed Coatings, Thin Solid Films, Vol.83 (1981), pp.297-310.
42. Akao, F., Araki, K., Mori, S. and Moriyama, A., Deformation Behaviors of a Liquid Droplet Impinging onto Hot Metal Surface, Trans. Int. Steel Inst. Japan, Vol.20 (1980), pp.737-743.
43. Collings, E.W., Markworth, A.J., McCoy, J.K. and Saunder, J.H., Splat-Quench Solidification of Freely Falling Liquid-Metal Drops by Impact on a Planar Substrate, J. Mat. Sci., Vol.25 (1990), pp.3677-3682.
44. Solonenko, O.P. and Smirnov, A.V., Comparative Analysis and Testing of Different Theories Characterizing a Diameter and Thickness of Plasma Sprayed Splats, Proc. of the 12th Intern. Symp. on Plasma Chemistry, Minneapolis, USA, (1995), pp.921-926.
45. Solonenko, O.P., Smirnov, A.V., Ohmori, A. and Matsuno, Sh., Deformation and Solidification of Melt Microdroplets Impinging on Substrate. Theory and Experiment, Proc. of 14th Intern. Thermal Spray Conf., Kobe, Japan, (1995), pp.359-364.
46. Vardelle, M., Vardelle, A., Li, K.-I., Fauchais, P. and Themelis, N.J., Coating Generation: Vaporization of Particles in Plasma Spraying and Splat Formation, Pure and Applied Chemistry, Vol.68, No.5 (1996), pp.1093-1099.
47. Fauchais, P., Vardelle, M., Vardelle, A., Bianchi, L. and Leger, A.C., Parameters Controlling the Generation and Properties of Plasma Sprayed Zirconia Coatings, Plasma Chemistry and Plasma Processing, Vol.16, No.1 (Supplement) (1996), pp.99S-125S.
48. Matejicek, J., Sampath, S. and Herman, H., Processing Effects on Splat Formation, Microstructure and Quenching Stress in Plasma Sprayed Coatings, Thermal Spray: Meeting the Challenges of the 21st Century, Edited by Coddet, C., (1998), pp.419-424, ASM International, USA.
49. Fan, X., Gitzhofer, F. and Boulos, M., Investigation of Alumina Splats Formed in the Induction Plasma Process, J. of Thermal Spray Technology, Vol.7, No.2 (1998), pp.197-204.
50. Shinoda, K., Han, P. and Yoshida, T., The Microstructure of YSZ Splats Deposited by Hybrid Plasma Spraying, Proc. of the 15th Intern. Symp. on Plasma Chemistry, Orleans, France, Vol.6 (2001), pp.2661-2666.
51. Solonenko, O.P. and Smirnov, A.V., Physical Modeling Different Scenarios of Metallic Splats Formation under Plasma Spraying, Proc. of 14th Intern. Symp. on Plasma Chemistry, Praha, Czech Republic, (1999), pp.2121-2126.
52. Kudinov, V.V., Plasma Coatings, (in Russian), (1977), Science Publishing, Moscow.
53. Solonenko, O.P., Mikhalchenko, A.A. and Kartaev, E.V., Model Studying Zirconia Droplet Deposition and Solidification on Substrate under Plasma Spraying: Theory and Experimental Verification, Proc. of the 5th JSME-KSME Fluids Engineering Conf., Nagoya, Japan, (2002), (Electronic Publication).
54. Predtechensky, M.R., Cherepanov, A.N., Popov, V.N. and Varlamov, Yu.D., Study of Impact Dynamics and Crystallization of Liquid Metal Drop on Multilayer Substrate, Journal of Applied Mechanics and Technical Physics, Vol.43, No.1 (2002), pp.93-102.
55. Samarsky, A.A. and Moiseenko, B.D., A Highly Efficient Computation Scheme for the Multidimensional Stefan Problem, Zh. Vychisl. Mat. Mat. Fiz., (in Russian), Vol.5, No.5 (1965), pp.816-827.