High power ultrasonics in pyrometallurgy: Current status and recent development

ISIJ International

Volumn 45, Issue 12, 2005, Pages 1765-1782

  Komarov, Sergey V ^a   Kuwabara, Mamoru ^b   Abramov, Oleg V ^c  

^a TOHOKU UNIVERSITY   (Japan)

^b NAGOYA UNIVERSITY   (Japan)

^c KURNAKOV INSTITUTE OF GENERAL AND INORGANIC CHEMISTRY   (Russian Federation)

Author keywords

Air pollutants; Cast composites; Continuous casting; High power ultrasonics; High temperature; Melt atomization; Non linear phenomena; Pyrometallurgy; Sonoprocessing

Indexed keywords

EXHAUST GASES; HIGH TEMPERATURE APPLICATIONS; INDUSTRIAL MANAGEMENT; SUSTAINABLE DEVELOPMENT; ULTRASONICS;

HIGH POWER ULTRASONICS; HIGH TEMPERATURE; NON-LINEAR PHENOMENA; SONOPROCESSING;

PYROMETALLURGY;

EID: 33244487808     PISSN: 09151559     EISSN: None     Source Type: Journal    
DOI: 10.2355/isijinternational.45.1765     Document Type: Review

References (119)

1. R. W. Wood and A. L. Loomis: Philos. Mag., 4 (1927), 417.
2. S. J. Sokolov: Acta Physicochim. USSR, 3 (1935), 939.
3. S. J. Sokolov: Tech. Phys. USSR, 3 (1936), 176.
4. O. V. Abramov. High-Intensity Ultrasonics: Theory and Industrial Applications, Gordon and Breach Science Publishers, Amsterdam, (1998), 692.
5. O. V. Abramov, S. G. Khorbenko and S. Shvelga: Ultrasonic Processing of Materials. Mashinostroenie, Moscow, (1984) [in Russian].
6. W. P. Mason and R. N. Thurston: Physical Acoustics, Vol. 4, Part B, Academic Press Inc., New York, (1965), 265.
7. M. B. Gitis and I. G. Mikhailov: Acoustic J., No. 12, (1965), 145.
8. E. P. Mednikov. Acoustic Coagulation and Precipitation of Aerosols, authorized translation from the Russian by Chas V. Larrick, USSR Academy of Sciences Press, Moscow, (1965), 180.
9. K. A. Blinov: Application of Acoustic Oscillations for Steelmaking Processes, Metallurgia, Chelyabinsk, Russia, (1991), 191 [in Russian].
10. L. D. Landau and E. M. Lifshits: Fluid Mechanics, Nauka, Moscow, (1986), 736.
11. S. Temkin: J. Acoust. Soc. Am., 103 (1998), No. 2, 838.
12. J. Carlson and P. E. Martinsson: Ultrasonics, 39 (2002), 585.
13. M. F. Hamilton and D. T. Blackstock: Nonlinear Acoustics, Theory and Applications, Academic Press, California, (1998), 455.
14. J. W. S. Rayleigh: Theory of Sound, Dover Publications, New York, (1945), Vol. 1, 480, Vol. 2, 504.
15. M. J. Lighthill: Waves in Fluids. Cambridge University Press, Cambridge, (1978), 504.
16. J. David and N. Cheeke: Boca Raton Fundamentals and Applications of Ultrasonic Waves, CRC Press, Boca Raton, (2003), 480.
17. S. Makarov and M. Ochmann: Acustica, 82 (1996), 579.
18. S. Makarov and M. Ochmann: Acustica, 83 (1997), 197.
19. T. G. Leighton: Int. J. Modern Phys. B., 18 (2004), 3267.
20. E. N. Harvey, D. K. Barnes, W. D. McElroy, A. H. Whiteley, D. C. Pease and K. W. Cooper: J. Cell. Comp. Physiol., 24 (1944), 17.
21. V. I. Dobatkin and G. I. Eskin, Effect of High-Power Ultrasound on Metal Interface, Nauka, Moscow, (1986), 6.
22. V. A. Akulichev: Intense Ultrasonic Fields, ed. by L. D. Goldberg, Nauka, Moscow, (1968), 129.
23. L. Crum: Ultrasonics, 22 (1984), 215
24. B. Flint and K.Suslick: J. Am. Chem. Soc., 111 (1989), 6987.
25. Z. A. Goldberg: Intense Ultrasonic Fields, ed. by L. D. Goldberg, Nauka, Moscow, (1968), 51.
26. Ultrasonic Transducers, ed. by Y. Kikuchi, Corona Pub. Co., Tokyo, (1969), 406.
27. O. V. Abramov: Effects of High-Intensity Ultrasonics on Liquid and Solid Metals. Nauka, Moscow, (2000), 312 [in Russian].
28. Yu. Ya. Borisov: Sources of High-Intensity Ultrasound, Vol. 1, ed. by L. D. Rozenberg, Plenum Press, New York, (1969), 3-162.
29. H. S. Patterson and W. Cawood: Nature, 127 (1931), 667.
30. E. N. da C. Andrade: Philos. Trans. R. Soc. (London) A., 230A (1932), No. 692, 413.
31. C. R. Soderberg: Iron and Steel Eng., 29 (1952), No. 2, 87.
32. S. Vajda: Iron and Steel Eng., 29 (1952). No. 7, 111.
33. E. Riera-Franco de Sarabia and J. A. Gallego-Juarez: J. Sound Vibration, 110 (1986), 413.
34. J. Magill, Ph. Caperan, J. Somers and K. Richter: J. Aerosol Sci., 22 (1991), Suppl. 1, S27
35. T. L. Hoffmann and G. H. Koopmann: J. Acoust. Soc. Am., 99 (1996), No. 4, 2130.
36. S. G. Afanasiev, K. A. Blinov, Yu. Ya. Borisov, Ya. D. Verbitsky. O. B. Havroshkin and Yu. V. Filatov: Inventors Certificate, USSR, No. 410099, Bulleten 1, (1974).
37. K. A. Blinov, A. D. Chertov, Ya. D. Verbitsky, A. I. Manohin, V. A. Ostrinsky, S. V. Kolpakov, A. M. Pozhivanov, S. Z. Afonin and Z. A. Alyamov: Inventors Certificate, USSR, No. 539951, Bulleten 47, (1976).
38. K. A. Blinov, Yu. Ya. Borisov, V. Yu. Volkov, S. Z. Afonin, Yu. G. Savvateev, V. A. Ostrinsky, Yu, E. Gorbenko and Z. A. Alyamov: Inventors Certificate, USSR. No. 779401, Bulleten 42, (1980).
39. S. Komarov, M. Kuabara and M. Sano: ISIJ Int., 40 (2000), 431.
40. K. A. Blinov and S. V. Komarov: Proc. 2nd Int. Symp. on Metallurgical Processes for the Year 2000 and Beyond, TMS, Warrendale, PA, (1994), 413.
41. K. A. Blinov, V. Yu. Volkov, A. M. Pozhivanov: Inventors Certificate, USSR, No. 699021, Bulleten 43, (1979).
42. V. G. Tyulebaev, V. M. Levin and Yu. F. Tyulebaeva: Metallurg, No. 5, (1986), 24.
43. S. Komarov, T. Yamamoto, T. Uda and M. Hirasawa: ISIJ Int., 44 (2004), 275.
44. P. D. Richardson: Appl. Mech. Rev., 20 (1967), No. 3, 201.
45. P. S. Larsen and J. W. Jensen: Int. J. Heat Mass Transfer, 21 (1978), 511.
46. M. Y. Ha and S. Yavuzkurt: Int. J. Heat Mass Transfer, 36 (1993), 2183.
47. P. J. Vermeulen, V. Ramesh and W. K. Yu: J. Eng. Gas Turbines Power, 108 (1986), 479.
48. P. S. Krueger and A. Gharib: AIAA J., 43 (2005), 792.
49. E. C. Mladin and D. A. Zumbrunnen: Int. J. Heat Mass Transfer, 40 (1997), 3305.
50. H. Yoshida, M. Koda, Y. Ooishi, K. Kobayashi and M. Saito: Int. J. Heat Fluid Flow, 22 (2001), 372.
51. S. Kumagai and H. Isoda: Fifth Symp. (International) on Combustion, Reinhold Publishing, New York, (1954) 129.
52. J. Blaszyk: Fuel, 70 (1991), 1023.
53. M. Saito, M. Sato and I. Suzuki: Fuel, 73 (1994), 349.
54. R. I. Sujith, G. A. Waldherr, J. I. Jagoda and B. T. Zinn: J. Propulsion Power, 16 (2000), 278.
55. S. Yavuzkurt, M. Y. Ha, G. Reethof, G. Koopmann and A. W. Scaroni: Trans. ASME, J. Energy Resour. Technol., 113 (1991), 286.
56. S. Yavuzkurt, M. Y. Ha, G. Koopmann and A. W. Scaroni: Trans, ASME, J. Energy Resour. Technol., 113 (1991), 277.
57. S. A. Koepke and J. Y. Zhu: Combustion Sci. Technol., 140 (1998), 315.
58. D. Demare and F. Baillot: Combustion Flame, 139 (2004), 312.
59. Y. Hardalupas and A. Selbach: Prog. Energy Combustion Sci., 28 (2002), 75.
60. M. Q. Mcquay, R. K. Dubey and W. A. Nazeer: Fuel, 77 (1998), 425.
61. O. Delabroy, F. Lacas, T. Poinsot, S. Candel, T. Hoffmann, J. Hermann, S. Gleis and D. Vortmeyer: Combustion Sci. Technol., 119 (1996), 397.
62. J. O. Keller, T. T. Bramlette, P. K. Barr and J. R. Alvarez: Combustion Flame, 99 (1994), 460.
63. M. Saito, M. Sato and A. Nishimura: Fuel, 77 (1998), 973.
64. J. R. Hertzberg: Combustion Flame, 109 (1997), 314.
65. C. R. Stewart, P. M. Lemieux and B. T. Zinn: Combustion Sci. Technol., 94 (1993), 427.
66. J. W. Willis, C. Cadou, M. Mitchell, A. R. Karagozian and O. I. Smith: Combustion Flame, 99 (1994), 280.
67. Y. N. Chun and D. Y. Shin: Kor. J. Chem. Eng., 21 (2004), 811.
68. G. Pont, C. P. Cadou, A. R. Karagozian and O. I. Smith: Combustion Flame, 113 (1998), 249.
69. E. J. Gutmark, T. P. Parr, K. J. Wilson, K. H. Yu, R. A. Smith, D. M. Hansonparr and K. C. Schadow: Combustion Sci. Technol., 121 (1996), 333.
70. J. A. Cole, N. C. Widmer, W. R. Seeker, K. C. Schadow, T. P. Parr and K. J. Wilson: Chemosphere, 42 (2001), 765.
71. S. Komarov, M. Kuwabara and M. Sano: Ultrasonic Sonochem., 7 (2000), 193.
72. O. Andersen, P. Schreckenberg and K. Bauckhage: Int. J. Powder Metall., 31 (1995), 341.
73. O. Andersen, S. Hanmann and K. Bauckhage: Part. Part. Syst. Charact., 13 (1996), 217.
74. S. Yamahira, S. Hatanaka, M. Kuwabara and S. Asai: Jpn. J. Appl. Phys., 39 (2000), 3683.
75. R. Pohlman and E. G. Lierke: Proc. of 5th Int. Cong. on Acoustics, ICA, Liege, (1965), D35.
76. N. J. Grant: J. Met., 35 (1983), 20.
77. N. J. Grant: Rapid Solification Processing, Plenum Press, New York, (1978), 230.
78. V. Anaud, A. J. Kaufman and N. J. Grant: Proc. of 2nd Int. Conf. on Rapid Solidification, Claitor's Pub. Division, Baton Rouge, (1980), 273.
79. P. K. Domalavage, N. J. Grant and Y. Gefen: Metall. Trans. A, 14A (1983), 1599.
80. P. K. Domalavage, N. J. Grant and Y. Gefen: Metall. Trans. A, 14A (1983), 1599.
81. T. W. Clyne, R. A. Ricks and P. J. Goodhew: Int. J. Rapid Solid., 1 (1984-85), 59.
82. T. W. Clyne, R. A. Ricks and P. J. Goodhew: Int. J. Rapid Solid., 1 (1984-85), 85.
83. O. V. Abramov, Yu. Ya. Borisov and R. A. Oganyan: Akust. Zh, 27 (1981), 801 [in Russian].
84. O. V.Abramov, R. A. Oganyan and T. S. Shishkhanov: Poroshk. Metall., 6 (1981), 6.
85. O. V Abramov, V. L. Gershov and R. A. Oganyan: Metalloved. Term. Ohrab. Met., 37 (1982).
86. I. G. Polotskii: Proc. Inst. of Ferr. Metallurgy Acad. Sci. USSR, Izd, AN USSR, Kiev, (1963), 91.
87. V. I. Danilov and G. Kh. Chedzhemov: Problems of Physical Metallurgy and Physics of Metals (in Russian), Metallurgizdat, Moscow, (1955), 34.
88. G. Schmid and L. Ehret: Zs. Electrochem., 43 (1937), 269.
89. G. I. Eskin: Ultrasonic Treatment of Molten Aluminum (in Russian), Metallurgiya, Moscow, (1965), 234.
90. G. I. Pogodin-Alekseev: Ultrasound and Low Frequency Vibrations in Alloy Production (in Russian), NTO, Mashprom, (1961),74.
91. I. G. Povolotsky: Application of Ultrasonic Oscillations for Property Investigations, Quality Control and Treatment of Metals and Alloys, AN USSR, Kiev, (1960), 78 [in Russian].
92. H. Seeman and H. Menzel: Zs. Metall., 1 (1947), 318.
93. G. I. Eskin: Ultrasonic Treatment of Molten Aluminum, Metallurgiya, Moscow, (1965), [in Russian].
94. G. I. Eskin: Effect of High-intensity Ultrasound on Metal Interfaces, Nauka, Moscow, 6 (1986), [in Russian].
95. G. I. Eskin: Ultrasonic Treatment of Melts in Shaped and Continuous Casting of Light Alloys, Mashinostroenie, Moscow, (1975), 57 [in Russian].
96. G. I. Eskin: Adv. Sonochem., 3 (1993).
97. G. I. Eskin: Ultrasound Sonochem., 2 (1995), 137.
98. G. I. Eskin and I. N. Fridlyander: Metalloved. Term. Ohrab. Met., 4 (1962), 320.
99. G. I. Eskin: Izv. AN SSSR, Ser. Metallurgiya i Toplivo, 1 (1963), 118.
100. O. V. Abramov: Crystallization of Metals in Ultrasonic Field Metallurgiya, Moscow, (1972), 256 [in Russian].
101. Y. Osawa, G. Arakane, S. Takamori, A, Sato and O. Ohashi: Foundry Eng., 71 (1999), 98.
102. Y. Osawa and A. Sato: Foundry Eng., 72 (2000), 734.
103. Y. Osawa, S. Takamori, G. Arakane, O. Umezawa, A. Sato and O. Ohashi: Foundry Eng., 72 (2000), 187.
104. S. S.Hinchliff and J. W. Jones: Foundry Trade J., 1 (1955), No. 9, 251.
105. J. Jagaciak and J. W. Jones: Foundry Trade J., 1 (1956) No. 10, 595.
106. S. Hatanaka, T. Taki, M. Kuwabara, M. Sano and S. Asai: Jpn. J. Appl. Phys., 38 (1999), 3096.
107. O. Abramov, A. Izotov, Yu. Astashkin, G. Kryuchkova, A. Manokhin, M. Markov and V. Taran: Steel, No. 4, (1985), 13 [in Russian].
108. G. I. Pogodin-Alerkseev and V. V. Zaboleev-Zotov: Liteinoe proizvodstvo, No.7, (1958), 35 [in Russian].
109. G. I. Pogodin-Alerkseev: Ultrasound and Low-freqency Vibration in Alloy Production, Mashgiz, Moscow, (1961), 71 [in Russian].
110. G. I. Pogodin-Alerkseev: Application of Ultrasound in Machine-building, MD NTR, Moscow, (1963), 72 [Russain].
111. O. V. Abramov, S. A. Govovanenko and I. V. Abramov: Metally, No. 6, (1972), 227.
112. I. V. Abramov, O. V. Abramov, V. B. Kireev: Met. Sci. Heat Treat., No. 12, (1975), 31.
113. I. V. Abramov, O. V. Abramov, V. B. Kireev, S. B. Maslenkov: Fizika i khimiya obrabotki materialov, No. 1, (1979), 54 [Russian].
114. O. V. Abramov, V. O. Abramov, F. Sommer and D. Orlov: Mater. Lett., 23 (1995), 17.
115. V. O. Abramov, O. V. Abramov, F. Sommer and D. Orlov: Mater. Lett., 29 (1996), 67.
116. F. Chen and G. Shu: J. Mater. Sci. Lett., 17 (1998), 259.
117. Y. Genma, Y. Tsunekawa, M. Okumiya and N. Mohri: Mater. Trans., 38 (1997), 239.
118. G. I. Eskin and D. G. Eskin: Ultrasonics Sonochem., 10 (2003), 297.
119. Y. Yang, J. Lan and X. Li: Mater. Sci. Eng., A 380 (2004), 378.