Materials damage prognosis: A revolution in asset management

Materials Damage Prognosis - Proceedings of a Symposium of the Materials Science and Technology 2004 Conference

Volumn , Issue , 2005, Pages 3-10

[No Author Info available]

Author keywords

Engine Health Management; Life Management; Life Prediction; Prognosis; Prognostics; System Health Management; Vehicle Health Management

Indexed keywords

FAILURE (MECHANICAL); PREVENTIVE MAINTENANCE; PROBLEM SOLVING; REAL TIME SYSTEMS; ROBUSTNESS (CONTROL SYSTEMS);

ENGINE HEALTH MANAGEMENT; LIFE MANAGEMENT; LIFE PREDICTION; PROGNOSIS; PROGNOSTICS; SYSTEM HEALTH MANAGEMENT; VEHICLE HEALTH MANAGEMENT;

MATERIALS SCIENCE;

EID: 33244471924     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (59)

1. Hadcock, R. N., "Aging Airframe Structural Life Enhancement: An Overview," presented at The First Joint DOD/FAA/NASA Conference on Aging Aircraft, Ogden, Utah, July, 1997.
2. SAB (Scientific Advisory Board), Report of the Ad Hoc Committee on Life Extension and Mission Enhancement for Air Force Aircraft, U.S Air Force Scientific Advisory Board, Washington, D. C., Department of the Air Force, Report TR-94-01,1994.
3. NMAB (National Materials Advisory Board), Aging of U.S. Air Force Aircraft, National Research Council, National Academy Press, Washington, D.C., Publication NMAB-488-2, 1997.
4. Los Alamos National Laboratory Workshop on Damage Prognosis, Phoenix, AZ, 26-28 March 2001.
5. The Air Force Research Laboratory Integrated Systems Health Management Conference, Dayton, Ohio, August 17-19, 2004.
6. C. R. Farrar, H. Sohn, F. M. Hemez, M. C. Anderson, M. T. Bernent, P. J. Cornwell, S. W. Doebling, J. F. Schultze, N. Lieven, A. N. Robertson, "Damage Prognosis: Current Status and Future Needs, technical report LA-14015-MS, Los Alamos National Laboratory, Los Alamos NM, July 2003, 〈http://www.lanl.gov/projects/ncsd/reports/LA-14051-MS.pdf〉.
7. L. Christodoulou and J. M. Larsen, "Using Materials Prognosis to Maximize the Utilization Potential of Complex Mechanical Systems," JOM, March 2004, 15-19.
8. J. M. Larsen and L. Christodoulou, "Materials Prognosis: Integrating Damage-State Awareness and Mechanism-Based Prediction," JOM, March 2004, p. 14.
9. W. Hardman, "Mechanical and Propulsion Systems Prognostics: U.S. Navy Strategy and Demonstration," JOM, March 2004, 21-27.
10. G.J. Kacprzynski, A. Sarlashkar, M.J. Roemer, A. Hess, and W. Hardman, "Predicting Remaining Life by Fusing the Physics of Failure Modeling with Diagnostics," JOM, March 2004, 29-35.
11. M. Derriso, W. Braisted, J. Rosenstengel, and M. DeSimio, "The Structural Health Monitoring of a Mechanically Attached Thermal Protection System," JOM, March 2004, 36-39.
12. C. Farrar, F. Hemez, G. Park, A. Robertson, H. Sohn, and T. Williams, "Developing Impact and Fatigue Damage Prognosis Solutions for Composites," 'JOM, March 2004, 40-42.
13. Defense Advanced Research Projects Agency (DARPA), "Broad Agency Announcement, BAA03-02," FedBizOpps, Commerce Business Daily, 6 January 2003.
14. Northrop Grumman Corporation, "Prognostication," Aviation Week & Space Technology; 11/10/2003, Vol. 159 Issue 19, p13.
15. Warwick, Graham, "DARPA Aims to Anticipate Flaws," Flight International, December 16-22, 2003.
16. T. A. Cruse, "Exploration and Assessment of Technologies to Support Risk-Based Decision System for Prognosis of Legacy Propulsion Systems", final report under Universal Technology Corporation Agreement Number: 01-S437-027-02-C1, Prime Number: F33615-97-D-5271, May 2002.
17. R. Callan and B. Larder, "The Implementation of Advanced Diagnostic and Prognostic Concepts - Practical Tools for Effective Diagnostic and Prognostic Health Management" IEEEAC paper, #1317, IEEE. 2003.
18. V.B. Markov, B.B. Buckner, J.C. Earthman and J. Angeles, "Tracing the Fatigue Damage Precursor with Laser Scanning Technique (LST)," in this proceedings.
19. D.W. Aker, "Physically-Based Health Management Tool for Improved Prognostics and Diagnostics of Turbine Engines," in this proceedings.
20. S.J. Hudak, Jr., M. P. Enright, R. C. McClung, H. R. Millwater, A. Sarlashkar, and M. J. Roemer, "Enhanced Prognosis Through Probabilistic Damage Assessment," Final Report, UTC Subcontract No. 01-S437-002-43-C1, UTC Prime Contract No. F33615-97-D-5271, SwRI Project No. 18.04638, ASC-02-2659, June 2002.
21. R.C. McClung, M.P. Enright, H.R. Millwater, G. R. Leverant, and S.J. Hudak, Jr., "A Software Framework for Probabilistic Fatigue Life Assessment," Probabilistic Aspects of Life Prediction, ASTM STP 1450, W. S. Johnson and B. M. Hillberry, Eds., ASTM International, West Conshohocken, PA, 2003.
22. S. J. Hudak, Jr., B. R. Lanning, G. M. Light, J. M. Major, J. A. Moryl, M. P. Enright, R. C. McClung, and H. R. Millwater, "The Influence of Uncertainty in Usage and Fatigue Damage Sensing on Turbine Engine Prognosis," in this proceedings.
23. N.E. Ashbaugh, E.L. Burke, S. Satish and S.L. Freed, "Behavior of Nonlinear Acoustic Beta Parameter for Fatigue of a Nickel-Base Superalloy," in this proceedings.
24. K. Li, N.B. Ashbaugh, and A.H. Rosenberger, "Crystallographic Initiation of Nickel-Base Superalloy IN100 at RT and 538°C Under Low Cycle Fatigue Conditions," Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, I.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, Eds., TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 15086, USA, 2004, 251-258.
25. R. Brockman and R. John, "Simulation of Deformation Modes for Damage Detection in Turbine Engine Disks," in this proceedings.
26. Y. Zhao and R. Tryon, "Automatic 3-D Simulation and Micro-stress Distribution of Polycrystalline Metallic Materials, Computer Methods in Applied Mechanics and Engineering, 193 (2004) 3919-3934.
27. R.G. Tryon, A. Dey, Y. Zhao, and A. Iyer, "Microstructural Modeling and Simulation for Prognostics," in this proceedings.
28. Southwest Research Institute, "Design Assessment of Reliability With INspection (DARWIN)", 〈www.darwin.swri.org〉
29. V.B. Markov, B.D. Buckner, J. Angeles, J.C. Earthman, "Tracing Fatigue Damage Precursors Using the Laser Scanning Technique (LST)", in this proceedings.
30. J.W. Littles, B.A. Cowles, R.A. Holmes, R.G. Pettit, J.J. Schirra, S.M. Russ, A.H. Rosenberger, and J.M. Larsen, "Demonstration of Advanced Prognostic Health Management Approach for Gas Turbine Engine Disks," in this proceedings.
31. J.L. Williams, R.H. VanStone, B.H. Lawless, D.M. Corbly, G. Khan, and A. Kaya, "Spin Pit Crack Growth Evaluation of Materials-Based Prognosis Concept," in this proceedings.
32. Russ, S. M., Rosenberger, A. H., Larsen, J. M., Berkley, R. B., Carroll, D., Cowles, B. A., Holmes, R. A., Littles, J. W., Jr., Pettit, R. G., and Schirra, J. J., "Demonstration of Advanced Life-prediction and State-awareness Technologies Necessary for Prognosis of Turbine Engine Disks," Health Monitoring and Smart Nondestructive Evaluation of Structural and Biological Systems III, proceedings of SPIE, Vol. 5394, 2004, pp. 23-32.
33. A.V. Flotow, P. Tappert, M. Mercadal, and W. Hardman, "Successes and Failures for LCF Rotor Burst Prognosis Using Blade-Tip Sensors," in this proceedings.
34. A.H. Rosenberger, "The Effect of Partial Vacuum on the Fatigue Crack Growth of Nickel Base Superalloys," Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, Eds., TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 15086, USA, 2004, 233-239.
35. J.W. Littles, Jr. and M.B Buczek, "Engine System Prognosis," in this proceedings.
36. K. Chung, "Integrated Engine Prognostics and Health Management (IEPHM) System," in this proceedings.
37. J.M. Papazian, E. Anagnostou, S. Engel, J. Madsen, R. Silberstein, and J. Whiteside, "Structural Integrity Prognosis System," presented at the TMS Materials Science and Technology (MS&T) symposium on Materials Damage Prognosis, New Orleans, LA, Sept. 2004.
38. S. Engel and D. Hoitsma, "Reasoning and Prediction Strategies for Prognosis," in this proceedings.
39. S. Marble, "Application of Material Fatigue Modeling to Bearing Life Prognosis," in this proceedings.
40. N. Goldfine, V. Zilberstein, C. Craven, D. Grundy, R. Silberstein, and S. Chu, "Early Stage Fatigue Damage Detection and Characterization for Prognostics Model Validation," in this proceedings.
41. D.S. Muench, G. Kacprzynski, M.J. Roemer, R. Wei, and G. Harlow, "Adaptive Prognosis Applied to Corrosion/Fatigue," in this proceedings.
42. A. Witney, Y-F. Li, J. Wang, M. Z. Wang, J. DeLuccia and C. Laird, "Electrochemical Fatigue Sensor Response to Ti-6Al-4V Alloy and 4130 Steel", Phil. Mag., 84 (Feb, 2004) Nos. 3-5, 331-349.
43. A. Ingraffea, A. Maniatty, and A.D. Rollett, "Simulation of Fatigue Crack Initiation in Aluminum Alloys Using Realistic Microstructures," in this proceedings.
44. A. Brahme, D. Saylor, R. Campman, S. Lee, J. Fridy, A.D. Rollett, "3D Microstructures for Prognosis Modeling," in this proceedings.
45. M.F. Horstemeyer, Y.A. Xue, and B. Jordon, "Multiscale Fatigue Modeling and Life Prediction for Al 7075-T651 Alloy," in this proceedings.
46. M.J. Roemer, R.F. Orsagh, and J. Sheldon, "Prognosis for Gas Turbine Engine Bearings," in this proceedings.
47. G. Vachtsevanos, "Addressing Uncertainty and Confidence in Prognosis," in this proceedings.
48. J. E. Michaels, T. E. Michaels, B. Mi, A. C. Cobb and D. M. Stobbe, "Self-Calibrating Ultrasonic Methods for In-Situ Monitoring of Fatigue Crack Progression", Review of Progress in Quantitative Nondestructive Evaluation, Vol. 24, D. O. Thompson and D. E. Chimenti (Eds.), American Institute of Physics, In Press, 2005.
49. B. Mi, J.E. Michaels, L.J. Jacobs and J. Qu, "Ultrasonic In-Situ Characterization of Material Damage," presented at the MS&T symposium on Materials Damage Prognosis, New Orleans, LA, Sept. 2004.
50. U.S. Air Force, Engine Structural Integrity Program, Military Standard 1783B, Aeronautical Systems Center, Wright-Patterson Air Force Base, OH, 31 May 2002.
51. S. K. Jha, J. M. Larsen, A. H. Rosenberger, and G. A, Hartman, "Dual Fatigue Failure Modes in Ti-6Al-2Sn-4Zr-6Mo and Consequences on Probabilistic Life Prediction," Scripta Materialia, Vol. 48/12, June 2003, pp. 1637-1642.
52. S. K. Jha, J. M. Larsen, and A. H. Rosenberger, "Incorporating Variability in a Mechanism-Based Life Prediction Methodology for Fatigue of Ti-6Al-2Sn-4Zr-6Mo," Ti-2003 Science and Technology, Proc. 10th World Conference on Titanium, Hamburg, Germany, 13-18 July, 2003, Edited by G. Lutjering and J. Albrecht, Wiley-VCH, pp. 1887-1894.
53. S. K. Jha, J. M. Larsen, and A. H. Rosenberger, "Mechanism-Based variability in Fatigue Life of Ti-6Al-2Sn-4Zr-6Mo," Journal of ASTM International, Vol. 1, Issue 2, Feb 2004.
54. S. K. Jha, J. M. Larsen, and A. H. Rosenberger, "Mechanism-Based variability in Fatigue Life of Ti-6Al-2Sn-4Zr-6Mo," Probabilistic Aspects of Life Prediction, ASTM STP 1450, W.S. Johnson and B.M. Hillberry, Eds., ASTM International, West Conshohocken, PA, USA, 2004, pp. 116-127.
55. S. K. Jha, J. M. Larsen, A. H. Rosenberger, and G. A, Hartman, "Variability in Fatigue Life of Ti-6Al-2Sn-4Zr-6Mo," Material Science and Engineering, A, in press, 2004.
56. Jha, S. K., Larsen, J. M., and Rosenberger, A. H, "The Role of Competing Mechanisms in the Fatigue Life Variability of a Nearly Fully-Lamellar γ-TiAl Based Alloy", Acta Materialia, in press, May 2004.
57. M. J. Caton, S. K. Jha, A. H. Rosenberger, and J. M. Larsen, "Divergence of Mechanisms and the Effect on the Fatigue Life Variability of Rene' 88 DT," Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, Eds., TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 15086, USA, 2004, 305-312.
58. A. Shyam, C. J. Torbet, S. K. Jha, J. M. Larsen, M. J. Caton, C. J. Szczepanski, T. M. Pollock, J. W. Jones, "Development of Ultrasonic Fatigue for Rapid, High Temperature Fatigue Studies in Turbine Engine Materials," Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, Eds., TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 15086, USA, 2004, 259-268.
59. H. Kitagawa and S. Takahashi, Proceedings of the Second International Conference on Mechanical Behavior of Materials, Boston, MA, 1976, pp. 627-631.