Cure-induced residual strain build-up in a thermoset resin

Composites Part A: Applied Science and Manufacturing

Volumn 37, Issue 4, 2006, Pages 592-601

  Antonucci, V ^a   Cusano, A ^b   Giordano, M ^a   Nasser, J ^c   Nicolais, L ^a  

^a CNR   (Italy)

^b UNIVERSITY OF SANNIO   (Italy)

^c UNIVERSITY OF NAPLES FEDERICO II   (Italy)

Author keywords

Cure strain; Fiber optic; Modeling

Indexed keywords

COMPUTER SIMULATION; FIBER OPTICS; FINITE ELEMENT METHOD; RESIDUAL STRESSES; SHRINKAGE; THERMAL EXPANSION;

CURE STRAIN; FIBER OPTIC BRAGG MEASUREMENTS; PROCESS-INDUCED STRESSES; STEEL MOLDS;

THERMOSETS;

EID: 33144467286     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2005.05.016     Document Type: Article

References (40)

1. M. Gigliotti, M.R. Wisnom, and K.D. Potter Development of curvature during the cure of AS4/8552 [0/90] unsymmetric composite plates Compos Sci Technol 63 2003 187 197
2. A.S.D. Wang, and F.W. Crosssman J Compos Mater 11 1977 300
3. H.T. Hahn, and N.J. Pagano Curing stress in composite laminates J Compos Mater 9 1975 91 105
4. Y. Weitsman Optimal cool-down in linear viscoelasticity J Appl Mech 47 1980 35
5. Y. Weitsman Residual thermal stresses due to the cool down of epoxy resin composites J Appl Mech 46 1979 563 567
6. R.J. Stango, and S.S. Wang Process-induced residual thermal stress in advanced fiber reinforced composite laminates J Eng Ind 106 1984 48 54
7. T.M. Wang, I.M. Daniel, and J.T. Gotro Thermoviscoelastic analysis of residual stresses and warpage in composite laminates J Compos Mater 26 1992 883 899
8. K.S. Kim, and H.T. Hahn Residual stress development during processing of graphite/epoxy composites Compos Sci Technol 36 1989 121
9. T.A. Bogetti, and J.W. Gillespie Jr Process-induced stress and deformation in thick-section thermoset composite laminates J Compos Mater 26 1992 626
10. S.R. White, and H.T. Hahn Process modeling of composite materials: residual stress development during cure. Part I. Model formulation J Compos Mater 26 1992 2402
11. S.R. White, and H.T. Hahn Process modeling of composite materials: residual stress development during cure. Part II. Experimental validation J Compos Mater 26 1992 2423
12. S.R. White, and Y. Kim Process-induced residual stress analysis of AS4/3501-6 composite material Mech Compos Mater Struct 5 1998 153 185
13. Y. Kim, and S.R. White Viscoelastic analysis of processing-induced residual stresses in thick composite laminates Mech Compos Mater Struct 4 1997 361 387
14. S. Yi, H.H. Hilton, and M.F. Ahmad Curing process induced viscoelastic residual stresses in polymer matrix laminated composites Proceedings of 1995 ASME international mechanical engineering congress and exposition 1995 p. 65
15. W.E. Lawrence, J.C. Seferis, and J.W. Gillespie Jr Material response of a semicrystalline thermoplastic polymer and composite in relation to process cooling history Polym Compos 13 1992 86 96
16. A.R. Plepys, and R.J. Farris Evolution of residual stresses in three-dimensionally constrained epoxy resins Polymer 31 1990 1932 1936
17. D. Adolf, and J.E. Martin Calculation of stresses in crosslinking polymers J Compos Mater 30 1996 13 34
18. D.B. Adolf, J.E. Martin, R.S. Chambers, S.N. Burchett, and T.R. Guess Stresses during thermoset cure J Mater Res 13 1998 530
19. D.B. Adolf, and R.S. Chambers Verification of the capability for quantitative stress prediction during epoxy cure Polymer 38 1997 5481 5490
20. M.S. Madhukar, M.S. Genidy, and J.D. Russell A new method to reduce cure-induced stresses in thennoset polymer composites. Part I: test method J Compos Mater 34 2000 1882 1904
21. J.D. Russell, M.S. Madhukar, M.S. Genidy, and A.Y. Lee A new method to reduce cure-induced stresses in thermoset polymer composites, Part III: correlating stress history to viscosity, degree of cure, and cure shrinkage J Compos Mater 34 2000 1926
22. M.S. Genidy An investigation of cure induced stresses in low cure temperature thermoset polymer composites J Reinf Plastics Comp 18 1999 1304
23. M. Alcoutlabi, G.B. McKenna, and S.L. Simon Analysis of the development of isotropic residual stresses in a bismaleimide/spiro orthocarbonate thermosetting resin for composite materials J Appl Polym Sci 88 2003 227 244
24. P. Prasatya, G.B. McKenna, and S.L. Simon A viscoelastic model for predicting isotropic residual stresses in thermosetting materials: effects of processing parameters J Compos Mater 35 2001 826 882
25. J.M. Svanberg, and J.A. Holmberg An experimental investigation on mechanisms for manufacturing induced shape distorsions in homogeneous and balanced laminates Composites Part A 2001 827 838
26. M. Cho, Min-Ho Kim, H.S. Choi, C.H. Chung, K.Y. Ahn, and Y.S. Eom A study on the room temperature curvature shapes of unsymmetric laminates including slippage effects J Compos Mater 32 1998 460 482
27. S.R. White, and H.T. Hahn Cure cycle optimization for the reduction of processing-induced residual stresses in composite materials J Compos Mater 27 1993 1352 1377
28. A. Kalmakarov, S. Fritzgerald, and O. Mac Donald The use of Fabry Perot fiber optic sensors to monitor residual strains during pultrusion of FRP composites Composites B 30 1999 165 175
29. C.M. Lawrence, D.V. Nelson, T.E. Bennett, and J.R. Spingarn Determination of process-induced residual stress in composite materials using embedded fiber optic sensors Proceedings of SPIE on smart structures and materials vol. 3042 1997 p. 154-65
30. T. Liu, D. Brooks, and G. Fernando A multimode extrinsic Fabry Perot interferometer strain sensor Smart Mater Struct 6 1997 464 469
31. M.J. O'Dwyer, G.M. Maistros, S.W. James, R.P. Tatam, and I.K. Partridge Relating the state of cure to the real time internal strain development in a curing composite using in-fiber Bragg gratings and dielectric sensors Meas Sci Technol 9 1998 1153 1158
32. A. Asundi, and J. Leng Real time cure monitoring of smart composite materials using extrinsic Fabry-Perot interferometer and fiber Bragg grating sensors Smart Mater Struct 11 2002 249 255
33. Giordano M, Cusano A, Cutolo A, Breglio G, Nicolais L. Multifunction fiber optic sensing system for Smart application, IEEE Trans Mechatron, in press.
34. V. Antonucci, M. Giordano, and L. Nicolais Effect of the segmental mobility restriction on the thermoset chemical kinetics J Pol Sci, Part A: Polym Chem 40 2002 3757 3770
35. D.R. Miller, and C.W. Macosko Macromolecules 9 1976 206
36. S.L. Simon, G.B. McKenna, and O. Sindt Modeling the evolution of the dynamical mechanical properties of a commercial epoxy during cure after gelation J Appl Polym Sci 76 2000 495 508
37. Giordano M, Laudati A, Nasser J, Nicolais L, Cusano A, Cutolo A. Monitoring by single fibre Bragg grating of the process induced chemo-physical transformations of a model thermoset, Sensor Actuator A, in press.
38. Perry HR, Chilton CH. In: Chemical engineers' handbook. New York: Mc Graw Hill; 1973, p. 23-48.
39. www.resins.com/resins/am/product_html/SC_772.html
40. J.A. Nairn Thermoelastic analysis of residual stresses in unidirectional high performance composites Polym Compos 6 1985 123