Effects of thermal residual stresses on failure of co-cured lap joints with steel and carbon fiber-epoxy composite adherends under static and fatigue tensile loads

Composites Part A: Applied Science and Manufacturing

Volumn 37, Issue 3, 2006, Pages 476-487

  Shin, Kum Cheol ^a   Lee, Jung Ju ^a  

^a Korea Advanced Institute of Science and Technology (KAIST)   (South Korea)

Author keywords

Co cured joint; Stacking sequence; Static and fatigue tensile loads; Surface roughness; Thermal residual stresses

Indexed keywords

ADHESION; COMPOSITE MATERIALS; FINITE ELEMENT METHOD; RESIDUAL STRESSES;

CO-CURED JOINT; STACKING SEQUENCE; THERMAL RESIDUAL STRESS;

CARBON FIBERS;

EID: 32644436070     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2005.03.031     Document Type: Article

References (35)

1. K.C. Shin, and J.J. Lee Tensile load bearing capacity of co-cured double lap joints J Adhes Sci Technol 14 2000 1539 1556
2. R. Jones, W.K. Chiu, and J. Paul Designing for damage tolerant bonded joints Compos Struct 25 1993 201 207
3. S. He, and M.D. Rao Residual stresses and delamination problems induced by co-curing of damped composite laminates J Compos Mater 28 1994 112 129
4. H.S. Kim, S.J. Lee, and D.G. Lee Development of a strength model for the co-cured stepped lap joints under tensile loading Compos Struct 32 1995 593 600
5. M.L. Scott, J.A.S. Raju, and A.K.H. Cheung Design and manufacturing of a post-buckling co-cured composite aileron Compos Sci Technol 58 1998 199 210
6. P. Olivier, and J.P. Cottu Optimisation of the co-curing of two different composites with the aim of minimising residual curing stress levels Compos Sci Technol 58 1998 645 651
7. J.H. Choi, and D.G. Lee Torque capacity of co-cured tubular lap joints J Compos Mater 31 1997 1381 1396
8. S.W. Lee, D.G. Lee, and K.S. Jeong Static and dynamic torque characteristics of composite co-cured single lap joint J Compos Mater 31 1997 2188 2201
9. D.H. Cho, D.G. Lee, and J.H. Choi Manufacture of one-piece automotive drive shafts with aluminum and composite materials Compos Struct 38 1997 309 319
10. D.H. Cho, and D.G. Lee Manufacturing of co-cured composite aluminum shafts with compression during co-curing operation to reduce residual thermal stresses J Compos Mater 32 1998 1221 1241
11. D.G. Lee, and D.H. Cho Prediction of the tensile load capability of co-cured steel-composite tubular single lap joints considering thermal degradation J Compos Mater 34 2000 689 722
12. D.H. Cho, and D.G. Lee Optimum design of co-cured steel-composite tubular single lap joints under axial load J Adhes Sci Technol 14 2000 939 963
13. S. Chiaki, and Y. Tomita Fatigue strength prediction model for steel-resin co-cured jointed interfaces with roughness. Proceedings of the international offshore and polar engineering conference, Seattle; 2000 p. 120-3
14. K.C. Shin, J.J. Lee, and D.G. Lee A study on the lap shear strength of a co-cured single lap joint J Adhes Sci Technol 14 2000 123 139
15. K.C. Shin, and J.J. Lee Prediction of the tensile load bearing capacity of a co-cured single lap joint considering residual thermal stresses J Adhes Sci Technol 14 2000 1691 1704
16. A.J. Kinloch Adhesion and adhesives: science and technology 1987 Chapman & Hall London p. 339-50
17. L.W. Crane, C.L. Hamermesh, and L. Maus Surface treatment of cured epoxy graphite composite to improve adhesive bonding SAMPE J 12 1976 6 9
18. B.M. Parker, and R.M. Waghorne Surface pretreatment of carbon fiber-reinforced composites for adhesive bonding Composites 13 1982 280 288
19. D.G. Lee, K.S. Kim, and Y.T. Im An experimental study of fatigue strength for adhesively bonded tubular single lap joints J Adhes 35 1991 39 53
20. J.W. Renton, and J.R. Vinson On the behavior of bonded joints in composite material structures Eng Fract Mech 7 1975 41 60
21. S.J. Lee, and D.G. Lee Optimal design of the adhesively bonded tubular single lap joint J Adhes 50 1995 165 180
22. E.D. Reedy, and T.R. Guess Butt joint strength and effect of residual stress and stress relaxation J Adhes Sci Technol 10 1996 33 45
23. Y.G. Kim, S.J. Lee, D.G. Lee, and K.S. Jeong Strength analysis of adhesively bonded tubular single lap steel-steel joints under axial loads considering residual thermal stresses J Adhes 60 1997 125 140
24. Y.G. Kim, and D.G. Lee Influence of fabrication residual thermal stresses on rubber-toughened adhesive tubular single lap steel-steel joints under tensile load J Adhes 65 1998 163 185
25. J.H. Cho, D.I. Kong, C.E. Park, and M.Y. Jin Effect of curing temperature on the adhesion strength of polyamideimide/copper joints J Adhes Sci Technol 12 1998 507 521
26. Annual Book of ASTM Standards (General products, chemical specialties, and end use of products), vol. 15. Philadelphia. PA: American Society for Testing and Materials; 1995. p. 205-8.
27. K.C. Shin, and J.J. Lee Bond parameters to improve tensile load bearing capacities of co-cured single and double lap joints with steel and carbon fiber-epoxy composite adherends J Compos Mater 37 2003 401 420
28. K.C. Shin, and J.J. Lee Fatigue characteristics of a co-cured single lap joint subjected to cyclic tensile loads J Adhes Sci Technol 16 2002 347 359
29. H.O. Fuchs, and R.I. Stephens Metal fatigue in engineering 1980 Wiley New York
30. M.G. Fontana Corrosion engineering International edition 1987 McGraw-Hill Singapore
31. R.L. Burden, and J.D. Faires Numerical analysis 1989 PWS-KENT Publishing Company Boston
32. K.C. Shin, and J.J. Lee Effects of bond parameters on fatigue characteristics of a co-cured double lap joint subjected cyclic tensile loads J Adhes 79 2003 581 596
33. ABAQUS/Standard User's Manual. Hibbitt, Pawtucket, RI: Karlsson & Sorensen; 1998.
34. H.N. Reddy Mechanics of laminated composite plates: theory and analysis 1997 CRC Press Boca Raton, FL p. 752-4
35. L. Ye Role of matrix resin in delamination onset and growth in composite laminates Compos Sci Technol 33 1988 257 277