Impinging jet cooling on concave surfaces

AIChE Journal

Volumn 50, Issue 8, 2004, Pages 1672-1683

  Souris, N ^a   Liakos, H ^a   Founti, M ^a  

^a NATIONAL TECHNICAL UNIVERSITY OF ATHENS   (Greece)

Author keywords

Concave surface; Impinging jet; Jet impingement cooling; K model; Reynolds stress model; Wall jet

Indexed keywords

COSTS; JETS; NOZZLES; REYNOLDS NUMBER; TURBULENCE;

JET IMPINGEMENT COOLING; REYNOLDS STRESS MODEL;

COOLING;

COOLING; IMPINGEMENT; JET; MATHEMATICAL ANALYSIS; MODEL; REYNOLDS NUMBER;

ARTICLE; COOLING; FLOW RATE; GEOMETRY; MATHEMATICAL MODEL; STRESS; SURFACE PROPERTY;

EID: 3242795811     PISSN: 00011541     EISSN: None     Source Type: Journal    
DOI: 10.1002/aic.10171     Document Type: Article

References (55)

1. Barata, J. M. M., D. F. G. Durao, and J. J. McGuirk, "Numerical Study of Single Impinging Jets through a Crossflow," J. Aircraft, 26(11), 1002 (1989).
2. Bray, D., "Jets in Cross-Flow and Ground Effect," Ph.D. Thesis, Aeromechanical Systems Group, Cranfield Institute of Technology, Shrivenham, Wiltshire, U.K. (1992).
3. Brison, J. F., and G. Brun, "Round Normally Impinging Turbulent Jets," Proc. of 15th Meeting IAHR Working Group on Refined Flow Modeling, Laboratoire Mécanique Fluides, ECL, Lyon, France (1991).
4. Bunker, R. S., and D. E. Metzger, "Local Heat Transfer in Internally Cooled Turbine Airfoil Leading Edge Regions. Part I: Impingement Cooling without Film Coolant Extraction," ASME J. Turbomachinery, 12, 451 (1990).
5. Chien, K. T., "Predictions of Channel and Boundary Layer Flows with a Low reynolds Number Turbulence Model," AIAA J., 20(1), 33 (1982).
6. Childs, R. E., and D. Nixon, "Turbulence and Fluid/Acoustic Interaction in Impinging Jets," SAE paper no. 872345 (1987).
7. Choi, M., H. S. Yoo, G. Yang, J. S. Lee, and D. K. Sohn, "Measurements of Impinging Jet Flow and Heat Transfer on a Semi-Circular Concave Surface," Int. J. Heat & Mass Transfer, 43(10), 1811 (2000).
8. Chup, R. E., H. E. Helms, P. W. Mcfadden, and T. R. Brown, "Evaluation of Internal Heat Transfer Coefficients for Impingement-Cooled Turbine Airfoils," J. Aircraft, 6, 203 (1969).
9. Clarke, D. S., and Wilkes, N. S., "The Calculation of Turbulent Flows in Complex Geometries Using a Differential Stress Model," Atomic Energy Research Establishment Report 13428, Berkshire, U.K. (1989).
10. Cornaro, C., A. S. Fleischer, and R. J. Goldstein, "Flow Visualization of a Round Jet Impinging on Cylindrical Surfaces," Exp. Therm. Fluid Sci., 20(2), 66 (1999).
11. Craft, T. J., L. J. Graham, and B. E. Launder, "Impinging Jet Studies for Turbulence Model Assessment-II. An Examination of the Performance of Four Turbulence Models," Int. J. Heat & Mass Transfer, 36(10), 2685 (1993).
12. Dotoya, D., and P. Michard, "A Problem for Calculating Boundary Layers along Compressor and Turbine Blades," Numerical Methods of Heat Transfer, Wiley, New York (1981).
13. Dyban, Y., and P. Mazur, "Heat Transfer from a Flat Air Jet Flowing into a Concave Surface," Heat Transfer-Soviet Res., 2, 15 (1970).
14. Garimella, R. V., and M. S. Shephard, "Boundary Layer Mesh Generation for Viscous Flow Simulations," Int. J. Numerical Methods Eng., 49, 193 (2000).
15. Garimella, S., and B. Nenaydykh, "Nozzle-Geometry Effects in Liquid Jet Impingement Heat Transfer," Int. J. Heat & Mass Transfer, 39(14), 2915 (1996).
16. Gau, C., and C. M. Chung, "Surface Curvature Effect on Slot Air-Jet Impingement Cooling Flow and Heat Transfer Process," ASME J. Heat Transfer, 113, 858 (1991).
17. Hanjalic, K., and B. E. Launder, "A Reynolds Stress Model of Turbulence and Its Application to Thin Shear Flows," J. Fluid Mechanics, 52, 609 (1972).
18. Hassid, S., and M. Poreh, "A Turbulent Energy Model for Flows with Drag Reduction," Trans. ASME J. Fluid Eng., 100, 107 (1978).
19. Hoffman, G. H., "Improved Form of the Low Reynolds Number k-ε Turbulence Model," Physics of Fluids, 188, 309 (1975).
20. Holmes, D. G., and S. D. Connell, "Solution of the 2D Navier-Stokes Equations on Unstructured Adaptive Grids," Proc. of AIAA 9th CFD Conference, AIAA paper 89-1932, Buffalo, NY (1989).
21. Hrycak, P., "Heat Transfer from a Row of Jets Impinging on Concave Semi-Cylindrical Surfaces," Int. J. Heat & Mass Transfer, 28, 175 (1981).
22. Hrycak, P., "Heat Transfer and Flow Characteristics of Jet Impinging on a Concave Hemispherical Plate," Proc. of the International Heat Transfer Conference, pp. 357-362 (1982).
23. Hsueh, K. L., and D. T. Chin, "Mass Transfer on a Submerged Jet Impinging on a Cylindrical Surface," J. Electrochem. Soc., 133, 1845 (1986).
24. Hwang, C. J., and J. L. Liu, "Numerical Studies of Two-Dimensional Impinging Jet Flow-Fields," AIAA J., 27(7), 841 (1989).
25. Jambunathan, K., E. Lai, M. A. Moss, and B. L. Button, "A Review of Heat Transfer Data for Single Circular Jet Impingement," Int. J. Heat & Fluid Flow, 13, 106 (1992).
26. Knowles, K., "Computational Studies of Impinging Jets Using k-ε Turbulence Models," Int. J. Numerical Methods in Fluids, 22(8), 799 (1996).
27. Kornblum, Y., and R. J. Goldstein, "Jet Impingement on Semi-Cylindrical Concave and Convex Surfaces. Part Two: Heat Transfer," Proc. Int. Symp. on Physics of Heat Transfer in Boiling and Condensation, pp. 597-602 (1997).
28. Koronaki, E. D., H. H. Liakos, M. A. Founti, and N. C. Markatos, "Numerical Study of Turbulent Diesel Flow in a Pipe with Sudden Expansion," Appl. Math. Modell., 25(4), 319 (2001).
29. Kottke, V., "Taylor-Görtler Vortices and Their Effect on Heat and Mass Transfer," Proc. Eighth International Heat Transfer Conference, 3, pp. 1139-1144 (1997).
30. Lam, C. K. G., and K. A. Bremhorst, "Modified Form of the k-ε Model for Predicting Wall Turbulence," Trans. ASME J. Fluids Eng., 103, 456 (1981).
31. Launder, B. E., G. J. Reece, and W. Rodi, "Progress in the Development of a Reynolds Stress Turbulence Closure," J. Fluid Mech., 68, 537 (1975).
32. Launder, B. E., and B. I. Sharma, "Application of the Energy Dissipation Model of Turbulence to the Calculation of Flow Near a Spinning Disk," Lett. Heat & Mass Transfer, 1, 131 (1974).
33. Launder, B. E., and D. B. Spalding, "The Numerical Computations of Turbulent Flows," Comput. Methods Appl. Mech. Eng., 3, 269 (1974).
34. Lee, D. H., Y. S. Chung, and D. S. Kim, "Turbulent Flow and Heat Transfer Measurements on a Curved Surface with a Fully Developed Round Impinging Jet," Int. J. Heat & Fluid Flow, 18(1), 160 (1997).
35. Lee, D. H., Y. S. Chung, and S. Y. Won, "Technical Note: The Effect of Concave Surface Curvature on Heat Transfer from a Fully Developed Round Impinging Jet," Int. J. Heat & Mass Transfer, 42(13), 2489 (1999).
36. Liakos, H. H., M. A. Founti, and N. C. Markatos, "Modeling of Stretched Natural Gas Diffusion Flames," Appl. Math. Modell., 24(5-6), 419, 2000.
37. Liakos, H. H., M. K. Koukou, M. A. Founti, and N. C. Markatos, "Effects of Pressure and Impingement Angle in Flaming Processes," Can. J. Chem. Eng., 78, 834 (2000).
38. Liu, T., and J. P. Sullivan, "Heat Transfer and Flow Structures in an Excited Circular Impinging Jet," Int. J. Heat & Mass Transfer, 39(17), 3695 (1996).
39. Malin, M. R., "Prediction of Radially Spreading Turbulent Jets," AIAA J., 26(6), 750 (1988).
40. Martin, H., "Heat and Mass Transfer between Impinging Gas Jets and Solid Surface," Adv. Heat Transfer, 13, 1 (1977).
41. Mayle, R. E., M. F. Blair, and F. C. Kopper, "Turbulent Boundary Layer Heat Transfer on Curved Surfaces," ASME J. Heat Transfer, 101, 521 (1981).
42. Metzger, D. E., R. T. Baltzer, and C. W. Jenkins, "Impingement Cooling Performance in Gas Turbine Airfoils Including Effects of Leading Edge Sharpness," ASME J. Eng. Power, 94, 219 (1972).
43. Metzger, D. E., T. Yamashita, and C. W. Jenkins, "Impingement Cooling on Concave Surfaces with Lines of Circular Air Jets," ASME J. Eng. Power, 91, 149 (1969).
44. Myszko, M., "Experimental and Computational Studies of Factors Affecting Impinging Jet Flow Fields," PhD Thesis, Cranfield University, Shrivenham, U.K. (1997).
45. Patankar, S. V., Numerical Heat Transfer and Fluid Flow, Hemisphere, Washington, DC, pp. 126-134 (1980).
46. Patankar, S. V., and D. B. Spalding, "A Calculation Procedure for Heat, Mass and Momentum Transfer in Parabolic Flows," Int. J. Heat & Mass Transfer, 15, 1787 (1972).
47. Reynolds, W. C., "Computation of Turbulent Flows," Annu. Rev. Fluid Mech., 8, 183 (1976).
48. Rodi, W., Turbulence Models and Their Application in Hydraulics-A State of the Art Review, International Association for Hydraulic Research, Delft, The Netherlands (1980).
49. Souris, N. E., H. H. Liakos, M. A. Founti, J. A. Palyvos, and N. C. Markatos, "Study of Impinging Turbulent Jet Flows Using the Isotropic Low-Reynolds Number and the Algebraic Stress Methods," Comput. Mechanics, 28, 381 (2002).
50. Tabakoff, W., and W. Clevenger, "Gas Turbine Blade Heat Transfer Augmentation by Impingement of Air Jets Having Various Configurations," ASME J. Eng. Power, 94, 51 (1972).
51. Thomann, H., "Effect of Streamwise Wall Curvature on Heat Transfer in a Turbulent Boundary Layer," J. Fluid Mechanics, 33, 283 (1968).
52. Viskanta, R., "Heat Transfer to Impinging Isothermal Gas and Flame Jets," Exp. Therm. Fluid Sci., 6, 111 (1993).
53. Wilcox, D. C., and W. M. Rubesin, "Progress in Turbulence Modeling for Complex Flow-Fields Including Effects of Compressibility," NASA Technical Paper 1517 (1980).
54. Wilkes, N. S., and D. S. Clarke, "Turbulent Flow Predictions Using Algebraic Stress Model," Atomic Energy Research Establishment Report 12694, Berkshire, U.K. (1987).
55. Yang, G., M. Choi, and J. S. Lee, "An Experimental Study of Slot Jet Impingement Cooling on Concave Surface, Effects of Nozzle Configuration and Curvature," Int. J. Heat & Mass Transfer, 42(12), 2199 (1999).