Transient concentrated finite line roller-to-race contact under combined entraining, tilting and squeeze film motions

Journal of Physics D: Applied Physics

Volumn 37, Issue 14, 2004, Pages 2018-2034

  Kushwaha, M ^a   Rahnejat, H ^a  

^a LOUGHBOROUGH UNIVERSITY   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

AIR ENTRAINMENT; APPROXIMATION THEORY; ELASTIC MODULI; ELASTICITY; ELASTOHYDRODYNAMICS; ELECTRIC CONTACTS; ISOTHERMS; KINEMATICS; MATRIX ALGEBRA;

LOAD DISTRIBUTION; SQUEEZE FILM MOTIONS;

LUBRICATION;

EID: 3242699000     PISSN: 00223727     EISSN: None     Source Type: Journal    
DOI: 10.1088/0022-3727/37/14/019     Document Type: Article

References (42)

1. Hamrock B J and Dowson D 1977 Isothermal elastohydrodynamic lubrication of point contacts, part III - fully flooded results Trans. ASME J, Lub. Technol. 99 264-76
2. Jalali-Vahid D, Rahnejat H, Gohar R and Jin Z M 1998 Comparison between experiments and numerical solutions for isothermal elastohydrodynamic point contacts J. Phys. D: Appl. Phys. 31 2725-32
3. Kushwaha M, Rahnejat H and Gohar R 2002 Aligned and misaligned contacts of rollers to races in elastohydrodynamic finite line conjunctions Proc. Inst. Mech. Engrs. part C: J. Mech. Eng. Sci. 216 1051-70
4. Balakrishnan S and Rahnejat H 2002 Transient elastohydrodynamic lubrication of piston skirt to cylinder liner under combined reciprocating and slapping motions Proc. AITC 2002, 3rd AIMETA Int. Tribology Conf. (Vietri Sul Mare, Salerno, Italy) p 9
5. Balakrishnan S, Howell-Smith S, Rahnejat H and Dowson D 2003 Investigation of reciprocating conformal contact of piston skirt and ring-pack to cylinder liner under transient conditions Proc. 30th Leeds-Lyon Symp. (Amsterdam: Elsevier) at press
6. Knoll G D and Peeken H J 1982 Hydrodynamic lubrication of piston skirts Trans. ASME 104 504-9
7. Offner G, Krasser J, Laback O and Priensch H H 2001 Simulation of multi-body dynamics and elastohydrodynamic excitation in engines especially considering piston-liner contact Proc. Inst. Mech. Engrs. part K: J. Multi-body Dyn. 215 93-102
8. Kim W J, Jeon H S and Park Y S 1991 Contact force prediction and experimental verification on an OHC Finger-follower-type Cam-valve system Exp. Mech. 150-6
9. Kushwaha M, Rahnejat H and Jin Z M 2000 Valve-train dynamics: a simplified tribo-elasto-multi-body analysis Proc. Inst. Mech. Engrs. part K: J. Multi-body Dyn. 214 95-110 ISSN 1464-4193
10. Kushwaha M and Rahnejat H 2002 Transient elastohydrodynamic lubrication of finite line conjunction of cam to follower concentrated contact J. Phys. D: Appl. Phys. 35 2872-90
11. Rahnejat H 1985 Computational modelling of problems in contact dynamics Eng. Anal. Comput. Mech. 2 192-7
12. Wardle F P 1988 Vibration forces produced by waviness of the rolling surfaces of thrust loaded ball bearings, part 1: theory Proc. Inst. Mech. Engrs. part C: J. Mech. Eng. Sci. 202 305-12
13. Wardle F P 1988 Vibration forces produced by waviness of the rolling surfaces of thrust loaded ball bearings, part 2: experimental validation Proc. Inst. Mech. Engrs. part C: J. Mech. Eng. Sci. 202 313-9
14. Aini R, Rahnejat H and Gohar R 1990 A five degrees of freedom analysis of vibrations in precision spindles Int. J. Mech. Tools Des. Manuf. 30 1-18
15. Rahman A K, Aini R and Gohar R 2002 On the effects of bearing settings on the dynamic performance of a three-bearing machine tool spindle Proc. Inst. Mech. Engrs. part K: J. Multi-body Dyn. 216 133-42
16. Akturk N 2003 Some characteristic parameters affecting the natural frequency of a rotating shaft supported by defect-free ball bearings Proc. Inst. Mech. Engrs. part K: J. Multi-body Dyn. 217 145-52
17. Aini R, Rahnejat H and Gohar R 1995 An experimental investigation into bearing-induced spindle vibration Proc. Inst. Mech. Engrs. part C: J. Mech. Eng. Sci. 209 107-14
18. Lynagh N, Rahnejat H, Ebrahimi M and Aini R 2000 Bearing induced vibration in precision high speed routing spindles Int. J. Mech. Tools Manuf. 40 561-77
19. Mostofi A and Gohar R 1982 Oil film thickness and pressure distribution in elastohydrodynamic point contacts Trans. ASME J. Lubr. Technol. 24 173-82
20. Rahnejat H 1984 Influence of vibration on the oil film in concentrated contacts PhD Thesis Imperial College of Science and Technology
21. Rahnejat H and Gohar R 1985 The vibrations of radial ball bearings Proc. Inst. Mech. Engrs. part C: J. Mech. Eng. Sci. 199 181-93
22. Aini R, Rahnejat H and Gohar R 2002 Vibration modelling of rotating spindles supported by lubricated bearings Trans. ASME J. Tribol. 124 158-65
23. Dareing D W and Johnson K L 1975 Fluid film damping of rolling contact vibrations Proc. Inst. Mech. Engrs. part C: J. Mech. Eng. Sci. 17 214-8
24. Mehdigoli H, Rahnejat H and Gohar R 1990 Vibration response of wavy surfaced disc in elastohydrodynamic rolling contact Wear 139 1-15
25. Jalali-Vahid D, Kushwaha M and Rahnejat H 2000 Transient concentrated lubricated contact dynamics Int. J. Gearing Transmissions (issue 3) 76-82
26. Dowson D and Wang D 1994 A analysis of a normal bouncing of a solid elastic ball on an oily plane Wear 179 29-38
27. Safa M M and Gohar R 1986 Pressure distribution under a ball impacting a thin lubricant layer Trans. ASME J. Lubr. Technol. 108 372-6
28. Al-Samieh M F and Rahnejat H 2002 Physics of lubricated impact of a sphere on a plate in a narrow continuum to gaps of molecular dimensions J. Phys. D: Appl. Phys. 2311-26
29. Sugimura J, Jones W R and Spikes H A 1998 EHD film thickness in non-steady state contacts Trans. ASME J. Tribol. 120 442-52
30. Al-Samieh M and Rahnejat H 2001 Ultra-thin lubricating films under transient conditions J. Phys. D: Appl. Phys. 34 2610-21
31. Stacke L E, Fritzson D and Nordling P 1999 BEAST-a rolling bearing simulation tool Proc. Inst. Mech. Engrs. part K: J. Multi-body Dyn. 213 63-71
32. Johns P M and Gohar R 1981 Roller bearings under radial and eccentric loads Tribol. Int. 131-6
33. Harris T A 1966 Rolling Element Analysis (New York: Wiley)
34. Mostofi A and Gohar R 1983 Elastohydrodynamic lubrication of finite line contacts Trans. ASME J. Lubr. Technol. 105 598-604
35. Johnson K L 1985 Contact Mechanics (Cambridge: Cambridge University Press)
36. Lundberg G 1961 Elastic contact between two semi-infinite bodies Forschung auf den Gebiete des Ingenieurwesen 10 165-74
37. Roelands C J A 1966 Correlation aspects of viscosity-temperature-pressure relationship of lubricating oils PhD Thesis Delft University of Technology, The Netherlands
38. Dowson D and Higginson G R 1959 A numerical solution to a elastohydrodynamic problem J. Mech. Eng. Sci. 1 6-15
39. Greenwood J A 1969 Presentation of elastohydrodynamic film thickness results J. Mech. Sci. 11 128-32
40. Kaneta M, Nishikawa H, Kanada T and Matsuda K 1996 Abnormal phenomenon appearing in EHL contacts Trans. ASME J. Tribol. 118 886-92
41. Venner C H and Bos J 1994 Effect of lubricant compressibility on the film thickness in EHL line and circular contacts Wear 173 151-65
42. Yang P, Qu S, Kaneta M and Nishikawa H 2001 Formation of steady dimples in point TEHL contacts Trans. ASME J. Tribol. 123 42-9